AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: Tim Crosby on April 02, 2019, 04:10:59 PM

Title: Another Screw Tip/Collar Horn
Post by: Tim Crosby on April 02, 2019, 04:10:59 PM

 This one is about 15" around the outside curve and 12" Tip=to-tip. The Walnut base is 2", it is held in with 4 iron pins and hollowed out about 3/4s its length. The tip is horn, the collar antler both are threaded 5/8-11 NC.

  Tim C.

PS: To me this is a Left side carry horn. TC

(https://i.ibb.co/mNRZM2M/002.jpg) (https://ibb.co/QDJS1T1)

(https://i.ibb.co/4N8Qg2j/003.jpg) (https://ibb.co/C0brs6n)

(https://i.ibb.co/xfXkG70/006.jpg) (https://ibb.co/QCpgnKR)

Title: Re: Another Screw Tip/Collar Horn
Post by: Greg Pennell on April 02, 2019, 04:59:45 PM

Tim, that makes me want to go downstairs and fire up the lathe...I love the shape and colors of this one!  Nice!

Greg

Title: Re: Another Screw Tip/Collar Horn
Post by: Marcruger on April 02, 2019, 07:18:57 PM

Lean and mean horn there Tim. I like it. Marc

Title: Re: Another Screw Tip/Collar Horn
Post by: hanshi on April 02, 2019, 08:55:37 PM

Great job; I like it.