AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Adrie luke on April 28, 2019, 05:06:23 PM
-
Hi,
I started to make a swivel pistol, half scale.
I think that making a pistol takes the same time as making a rifle.
It is good to make something else because now I learn a lot.
I used silver for the front of the barrels.
Adrie
(https://i.ibb.co/MDdPrwR/DSC00612.jpg) (https://ibb.co/zhdPp9S)
(https://i.ibb.co/56crND8/DSC00613.jpg) (https://ibb.co/f20khRp)
(https://i.ibb.co/syntsZJ/DSC00614.jpg) (https://ibb.co/vZpDLSv)
(https://i.ibb.co/GFJFM54/DSC00615.jpg) (https://ibb.co/stPt1Vd)
-
Your work always amazes me..... That looks great!!!! - a 27 caliber? :) - (1/2 of a 54...)
-
Jon ,
It is 1/2 of 12mm barrel.
-
You blew me away! Amazing craftsmanship1
-
Ahhh so to be historically accurate it's a 0.23622 Caliber, I enjoy your builds very much, and looking forward to this one. Thank you for sharing,
Jon
-
That is some great work.
-
Amazing!
-
I changed my opti visor. It gives me more space for my eyes and my work.
(https://i.ibb.co/qkkLHxH/DSC00624.jpg) (https://ibb.co/RzzGX7X)
Little engraving.
(https://i.ibb.co/XxwNJ0v/DSC00628.jpg) (https://ibb.co/fdcB06P)
(https://i.ibb.co/R995vnc/DSC00630.jpg) (https://ibb.co/800hK39)
-
Nice engraving Adrie!
Cheers,
Norm
-
Well done my friend!!!!
-
Hello,
I am very busy with repairing my house, so I am very slow finishing the Flintlock pistol.
But I had some spare time, so here some pictures of where I am right now.
The hammer top jaw is below, that was new for me.
When the pistol is finished I will sent new pictures.
Adrie
(https://i.ibb.co/Sd0V3NY/DSC00676.jpg) (https://ibb.co/hZH2msQ)
(https://i.ibb.co/M6m01wV/DSC00677.jpg) (https://ibb.co/wsfmQGW)
(https://i.ibb.co/Rj0SqjM/DSC00678.jpg) (https://ibb.co/Hhz2jhM)
(https://i.ibb.co/6DsxfYQ/DSC00681.jpg) (https://ibb.co/qm1fPB6)
-
(https://i.ibb.co/bs95vZ7/DSC00675.jpg) (https://ibb.co/x1Tqg03)
-
That is real fine craftsmanship. The only thing that bothers me is the frizzen springs could be a little prettier. The work is great.
-
Very creative. Love it.
-
Jerrywh,
you're richt
-
Your work is amazing. Very impressive! I enjoy watching you build these little gems.
-
Adrie,
That’s beautiful, great work!
I can’t wait to see it it finished!
I love the detail work on the lock especially.
Looking forward to your visit in September!
Norm.
-
You do excellent work my friend!
-
Adrie,
You have done it again. Looking forward to our visit in Sept with Norm. Jon Rider, Kingsbury Arms. will be here also. I think you are going to give all of us a lesson in gun building.
David Price
-
David,
We are very glad Norm will help us in the U.S., otherwise it would be possible we got lost!
Norm, Gonny and I are looking forward to see you and Jon.
Adrie
(https://i.ibb.co/Lkk7x56/DSC00690.jpg) (https://ibb.co/gjjKSVw)
I changed the frizzen spring and the hammer engraving.
(https://i.ibb.co/58bky78/DSC00697.jpg) (https://ibb.co/Z8qSPZ8)
-
Fantastic - Looking forward to meeting up this fall - Love your work - so precise and clean -
Jon
-
That some tiny jaws on that cock, do you use a Zippo lighter flint?
-
That is super cool. :)