AmericanLongRifles Forums

General discussion => Accoutrements => Topic started by: B.Barker on May 09, 2019, 06:23:15 AM

Title: This and that
Post by: B.Barker on May 09, 2019, 06:23:15 AM
After finishing up the rifle I've been working on some small projects. Had another order for an adjustable powder measure so I decided to make two and a couple rolled rammer tips too. Doing a little horn work to catch up on another project also.
(https://i.ibb.co/C0qLtkL/DSCN3685.jpg) (https://ibb.co/q1z6nt6)

(https://i.ibb.co/BsJ5gJs/DSCN3686.jpg) (https://ibb.co/DKFH7FK)

image hosting (https://imgbb.com/)
Title: Re: This and that
Post by: Cades Cove Fiddler on May 09, 2019, 06:25:57 PM
 8) 8) 8)... really gettin' into that  "Baer Killr" style of engraving, Brian,... !!! ..... I like it,...!!! ... good stuff there......
Title: Re: This and that
Post by: hanshi on May 09, 2019, 09:23:58 PM
That's very nice work!
Title: Re: This and that
Post by: aaronc on May 09, 2019, 11:35:16 PM
Like it
Title: Re: This and that
Post by: Tim Crosby on May 10, 2019, 11:01:06 AM
 Great horn B, like everything about it, those fine lines are tough to get right.

   Tim
Title: Re: This and that
Post by: Greg Pennell on May 10, 2019, 05:44:44 PM
Pretty work, Brian. You’re gonna have to have a class on making those beautiful measures.

Greg
Title: Re: This and that
Post by: B.Barker on May 11, 2019, 01:28:11 AM
Dana, the measures are where I started using this style of engraving.

Greg, maybe someday I can do a class on the measures.
Title: Re: This and that
Post by: Cory Joe Stewart on May 16, 2019, 03:03:26 PM
Very good work

Cory