AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: bama on May 16, 2019, 12:54:32 AM
-
Hello everyone
FREEDOM IS NEVER FREE
This is not about rifle building so moderators if you need to move please do so.
I just finished a Tomahawk project for the Masonic Mountain Men who will be raffling it and a pair of consecutively serial numbered 1911 Colts engraved by Keith Casteel.
The Theme for this years project is "Freedom Is Never Free". Everywhere you look today you see Vet's that have paid a high price for our Freedom. In an effort to give a little something back the Masonic Mountain Men are putting a lot of time, effort and money to fund this project and make it successful. Last years Thomas Simpson rifle project did very well and several thousand dollars was raised to help pay the medical bills of sick children. We are hopeful that we can duplicate those donations for this Wounded Warrior Project.
The proceeds this year will be used to help fund the hunts for the Wounded Warriors. I have nothing to do with the raffle itself but I wanted to mention it here because I know many of our community here are veterans. If you are interested in making a donation or getting some chances please go to the Masonic Mountain Men website for that information. They have pictures of the two Colt 1911's on the site which I can not post here. I have taken a few photo's of the Hawk with my phone to post here. There will be better photo's of it when the Mountain Men run their add in Muzzle Loader Mag.
Spec's of the Hawk. The head is an R E Davis casting. All of the inlays are Sterling Silver, the wire inlay was also cut from Sterling sheet. The cap plug was hand shaped and polished from a piece of water buffalo horn and has 4 Sterling Silver nails in it. The engraving was done by me, the handle was stained with Aqua Fortis and Birchwood Casey Walnut, the finish is a home brew of Shellac, Linseed Oil with some burnt Amber thrown for good measure. The head was rust blued then rubbed back some to a bluish grey. The mouth piece is poured pewter.
I am a Veteran myself and felt very honored to build this Hawk to help fellow Vet's.
Here are a few pictures of the Hawk.
(https://i.ibb.co/xSfhNNF/TH-1.jpg) (https://ibb.co/wNwyffc)
(https://i.ibb.co/WxChpjF/TH-2.jpg) (https://ibb.co/h7061wH)
(https://i.ibb.co/d4qs4KS/TH-3.jpg) (https://ibb.co/5hyXhcd)
(https://i.ibb.co/X7mjZ2h/TH-4.jpg) (https://ibb.co/5rqGWMN)
(https://i.ibb.co/rQhxGgk/TH-5.jpg) (https://ibb.co/sg4Kvhj)
(https://i.ibb.co/wQ5gFnG/TH-6.jpg) (https://ibb.co/C9R83jC)
(https://i.ibb.co/yBX57yp/TH-7.jpg) (https://ibb.co/93N2STh)
(https://i.ibb.co/M8g7Wgj/TH-8.jpg) (https://ibb.co/dbfD1f3)
(https://i.ibb.co/SvczFCX/TH-9.jpg) (https://ibb.co/ggdxkKM)
(https://i.ibb.co/sWFs9gG/TH-10.jpg) (https://ibb.co/Z2hczfP)
(https://i.ibb.co/wwcXcTq/TH-11.jpg) (https://ibb.co/0FsSskL)
(https://i.ibb.co/FXc71xt/TH-12.jpg) (https://ibb.co/VxbBGj8)
-
Absolutely wonderful, thank you
Mark Brier
-
Well done Jim! I appreciate your talent, patriotism, generosity, and sacrifice. I'm proud to have you as a friend.
Carl
-
I dont know what to say besides ….. WOW
Your tribute on this piece should be seen by more then just us here. Though not a Mason, My great uncle on my mothers side was a highly degreed Mason. I have his leather apron.
-
A well executed and very worthy project. Bravo Zulu!
David
-
Man that's nice. You made a real dandy of an axe Jim. Fantastic engraving on the armed forces emblems.
-
Jim,
Beautiful work. Thanks for all you do.
Paul
-
Outstanding! I hope it raises lots of money for a worthy cause.
Still trying to figure out how you secured the medallions to the hawk blade.
-
Cowboy, I used my milling machine and a 1" end mill to cut the circle to within a few thousandths the depth of the thickness of the silver. I then took a square graver that I have reshaped to make undercuts along the outside edge of the radius of the end mill cut. I cut the silver round from a sterling sheet and then place the silver round into the cut and using a flat punch go around the edge of the silver round and punch the edge of the silver into the undercut in the hawk head. Once you go all the way around the edge of the silver round it is locked permanently in place. I then filed the silver round flush with the hawk head surface and sanded the surface to a finish for engraving.
-
That's beautiful work.
-
Great work Jim!
Very nice especially on those armed forces emblems.
I hope they raise a bundle. I'm gonna check it out.
Jeff
-
A Beauty Jim, Thank You for Your time and talent.
Tim
-
Understated elegance that any one,especially another veteran would be proud to own.
It takes a very high level of skill to craft a thing like this without making it
look gaudy or cheap and you've certainly done this.
Bob Roller
-
Jim excellent work my fruend..! What else can anyone say ! Hope it brings in a lot of money for a very worth while cause...! Oldtravler
-
Jim,
First thank you for your service first and foremost to our country and now to a most worthy veteran cause! The design and artistry you have shown are top rate and beautifully executed. A piece that you see new art everytime you look at it. It will be the highlight of anyone's collection. Congratulations on a job well done for a most worthy cause.
Gary