AmericanLongRifles Forums

General discussion => Antique Gun Collecting => Topic started by: Squirrel pizza on July 20, 2019, 11:35:20 PM

Title: I found this rifle...
Post by: Squirrel pizza on July 20, 2019, 11:35:20 PM
Hi all! I stopped at a yard sale yesterday. Same old junk but a few interesting guns. In the roped off section by the toolbox was what appeared to be a long gun wrapped in a blanket. I was told it's just an old musket. With permission I unwrapped it and found this. The lock is marked "Pennsylvania  Rifle Works". On the top barrel flat in scroll is "H Burns". Guessing I would say .30 to .32cal. All I know about the PRW's is they were owned buy George and Robert Dunlap from 1837-1858. I don't know if H Burns was the rifles owner or builder. The man that owned it told me family lore says the rifle came from the Ohio valley, still shot, and if I bought it he'd throw in a bag, horn, and the things in the bag what made her shoot. It made no sense for me to leave my new rifle there with him so I brought her home. I'm no expert on bags and horns but they're very cool and look period. The tin can with the "round balls" are what look like split shot to me. I looked the rifle over, she looked safe, so yes, I shot it several times. Not a bad group for split shot and t-shirt patches. Anyway, does anyone have any info on this rifle? H Burns? An opinion on the value/age/authenticity of horn and bag? Thanks, SP
Please be patient as I try to upload pictures
(https://i.ibb.co/MgCbq7B/IMG-6687.jpg) (https://ibb.co/vcjb2kX)

(https://i.ibb.co/MDMzXmx/IMG-6693.jpg) (https://ibb.co/xSJn4Nt)

(https://i.ibb.co/CbY09kc/IMG-6699.jpg) (https://ibb.co/sKN310f)

(https://i.ibb.co/VtfHSFG/IMG-6675.jpg) (https://ibb.co/Bt04ZhJ)

(https://i.ibb.co/k8gsPrg/IMG-6677.jpg) (https://ibb.co/C753SX5)

(https://i.ibb.co/gdFTCC9/IMG-6682.png) (https://ibb.co/KDzqHHh)
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 20, 2019, 11:49:15 PM

(https://i.ibb.co/68m0HHw/IMG-6681.png) (https://ibb.co/C6zKbb8)

(https://i.ibb.co/FBMXD1Q/IMG-6688.jpg) (https://ibb.co/BgxGCJh)

(https://i.ibb.co/pfTfsxL/IMG-6689.jpg) (https://ibb.co/8rwrR07)

(https://i.ibb.co/5GMQyYk/IMG-6692.jpg) (https://ibb.co/mbDnwv0)
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 20, 2019, 11:52:17 PM

(https://i.ibb.co/r02mX5N/IMG-6679.jpg) (https://ibb.co/GpQ0rCN)

(https://i.ibb.co/zN565xN/IMG-6694.jpg) (https://ibb.co/d7cmcM7)

(https://i.ibb.co/GMLTNJF/IMG-6696.jpg) (https://ibb.co/xg0Hds3)
Title: Re: I found this rifle...
Post by: D. Taylor Sapergia on July 21, 2019, 12:35:19 AM
Nice old musket.  I'm sure it's happier in its new home - loved and cared for.
Title: Re: I found this rifle...
Post by: Tanselman on July 21, 2019, 06:20:06 AM
Your rifle was probably made by Henry Burns of Lewisburg in Preble County, Ohio over toward the western side of Ohio. From the shape of the guard, I'd think it's from around 1850. Shelby Gallien
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 07:02:05 AM
Thank you Tanselman. I haven't been able to find any information on H Burns yet. Could you point me in the right direction to a reference work? Most of what I've learned about Pennsylvania  Rifle Works is from old threads here at ALRA. I've read they were factory made guns of decent quality that were termed "hardware store" guns. While the lock is marked PRW, I don't think it's a factory made rifle. Little details like all the slots in the screws are in line with the barrel and the fit of the furniture.
Title: Re: I found this rifle...
Post by: scottmc on July 21, 2019, 03:02:21 PM
That's a cool find!!  Some guys have all the luck.  I like the bag/horn pairing too.  Can u give us some dimensions on the bag and a possible picture of its backside?  Hard to believe u can find something like this at a yard sale.  Congratulations!
Title: Re: I found this rifle...
Post by: Shreckmeister on July 21, 2019, 05:31:51 PM
Great bag and everything together!
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 05:57:17 PM
You're right Shrekmeister, I misspoke. It's Pennsylvania Riifle Works located in Philadelphia. My bad
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 06:09:29 PM
Scottmc, the bag measures 6"x6" and has a small inner pocket. The strap has been replaced. I'm not sure of the design on the flap but it appears to be a tree.
(https://i.ibb.co/rcZKbb0/IMG-6701.jpg) (https://ibb.co/3M05ffd)

(https://i.ibb.co/djR0gvf/IMG-6702.jpg) (https://ibb.co/Jm9RQTc)

(https://i.ibb.co/9WcwfPT/IMG-6703.jpg) (https://ibb.co/L1YQqKt)

(https://i.ibb.co/JQvYMyC/IMG-6704.jpg) (https://ibb.co/dgPNzL7)
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 06:16:13 PM
The horn is just over 8" long and would be a right side carry but there is wear in the finish on both sides of the plug and the square head nails are worn and shiny as if it's been carried on both sides. The plug itself measures close to 1 3/4" across.
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 06:19:16 PM

(https://i.ibb.co/4Y4kqz2/IMG-6706.jpg) (https://ibb.co/pR4q7cQ)

(https://i.ibb.co/nrrfDJK/IMG-6707.jpg) (https://ibb.co/7vvVGm0)

(https://i.ibb.co/h8zhXNt/IMG-6708.jpg) (https://ibb.co/JkJ0xTM)

(https://i.ibb.co/WWw03k9/IMG-6709.jpg) (https://ibb.co/pv8QPfD)

(https://i.ibb.co/DCpNPCx/IMG-6710.jpg) (https://ibb.co/J7QNW7f)
Title: Re: I found this rifle...
Post by: snapper on July 21, 2019, 06:23:36 PM
SP, you have been gone for a while.   

Fleener
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 21, 2019, 06:42:02 PM
SP, you have been gone for a while.   

Fleener
yes I have, for much too long. Seems like the whole family decided to get old sick and crippled at the same time. Not much time for play.
Title: Re: I found this rifle...
Post by: Tanselman on July 22, 2019, 12:00:07 AM
The name on the barrel is usually the gunmaker, while any name on a lock plate is normally the hardware store where the lock was sold, or in this case, the importer of the lock. Shelby Gallien
Title: Re: I found this rifle...
Post by: scottmc on July 22, 2019, 02:52:15 PM
Thanks for the additional pics of the bag and horn.  Very nice, petite set.  I'm guessing that the original strap attached to the outside sides of the bag.  I dont see any signs of stitch holes on the back.  Take care of them.  You got a good one there.
Title: Re: I found this rifle...
Post by: RobertS on July 22, 2019, 05:57:47 PM
That's a very special find, and thanks for posting-
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 23, 2019, 01:34:28 AM
That's a very special find, and thanks for posting-
It's my pleasure to be sure. That old saying "I wish these things could talk" is no lie. I'd love to hear their story!
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 25, 2019, 05:01:37 AM
Does anyone have an opinion on a fair price for the rifle? Horn and bag?
Does anyone have some .310.  .315 round balls they'd sell/send me so I can see how it shoots not using split shot? I know I can get rb's from TotW cheap but I'd rather buy a mold if I keep the rifle.

But I'm still hoping one of you, who know WAY more than me could impart some knowledge.
Thanks for any help, SP
Title: Re: I found this rifle...
Post by: Squirrel pizza on July 30, 2019, 11:08:08 PM
I know it's not easy to evaluate from pictures, but I was thinking of listing the group for sale here on the for sale forum. I know what I paid so I'd like to know if I thought too much of it or too little, and if I pass it on I want it to be a fair price for whoever gets her. I have a short video of me shooting the rifle and it functions flawlessly (but I'm willing to bet it would function more gooder with a proper roundball and not splitshot).
We all have an opinion, please share yours. Thanks, Mike SP
Title: Re: I found this rifle...
Post by: smokinbuck on August 05, 2019, 09:46:02 PM
If Tanselman is correct, and I am leaning towards his thoughts, you will find Burns in the Association of Ohio Longrifle's 5 volume set of books "Ohio Gunmakers & Allied Craftsmen". I will try to pin down which volume this evening. If he's there there will be a brief bio and perhaps some pics of his work.
Mark
Title: Re: I found this rifle...
Post by: smokinbuck on August 05, 2019, 10:10:12 PM
Squirrel,
If you go to "aolrc.com" and go to newsletters, scroll down to the 43rd Annual Show. You will find a brief article on Henry Burns. I will still find which volume he is in and let you know.
Mark
Title: Re: I found this rifle...
Post by: smokinbuck on August 05, 2019, 10:53:54 PM
Squirrel,
Chapter 2: I have listings for Henry Burns in Preble County in volume 4 on page 119 with a bio and on page 120 a picture of a Burns rifle. I also have a "brief" listing of Burns & Leatherman in  Montgomery County in volume 3. This listing may or may not be the correct Henry Burns. I have a Henry Burns rifle in my collection that is in at least 90% condition and differs from what you have shown in several areas. If you send me an email I would be happy to forward photos of mine. I also have copies of the AOLRC books available.
Mark
Title: Re: I found this rifle...
Post by: Craig Wilcox on August 06, 2019, 04:45:58 PM
SP, if you are going to sell it, get someone to make a casting of that trigger guard.  I, for one, would be tickled to put one of those on a rifle.  AND I live in Ohio, thus making it an Ohio gun!
You really made a nice find there.
Title: Re: I found this rifle...
Post by: Bob D on August 06, 2019, 07:56:09 PM
Craig,  If a casting of the trigger guard cannot be had I can provide you with photos from any angle except those that would require removing the trigger guard.   I have a Dunmeyer rifle that has the same trigger guard (TG).  I looked through Whisker's Ohio book and found two rifles that had similar TGs, one by John C. Ralph and the other by Benjamin Sells.  The Ralph rifle has a near match to the TG on your rifle and my Dunmeyer.  you can see photos of my rifle by searching this forum for "A slightly different Dunmeyer rifle".  If you need any further photos feel free to contact me by email,  While the TG is certainly not Dunmeyer, I have no knowledge of other rifles made by Ralph or Sells.
Bob
Title: Re: I found this rifle...
Post by: ericxvi on August 07, 2019, 12:01:43 AM
Christian Siebert from Columbus also used this trigger guard.
 I needed one for the bench copy I was making. Davis sells one that was too short for double set triggers , so I soldered two together.
It works great for off hand shooting.
Title: Re: I found this rifle...
Post by: Craig Wilcox on August 07, 2019, 06:41:00 PM
I appreciate the offer, BD.  I did save the picture, and it would be possible, as EricXVI says, make two into one.
It's a pretty little thing, for sure!
Title: Re: I found this rifle...
Post by: B.Barker on August 08, 2019, 04:51:53 AM
That's a cool looking rig you found there. Don't find to many rifles that come with their bag and horn set.
Title: Re: I found this rifle...
Post by: Notchy Bob on September 27, 2019, 07:52:35 PM
Does anyone have some .310.  .315 round balls they'd sell/send me so I can see how it shoots not using split shot? I know I can get rb's from TotW cheap but I'd rather buy a mold if I keep the rifle.

Sorry, but I don't have any lead balls of the size you need.  However, Track has lead round balls in .310", .311", .315", .319", and .320" for under $10.00 per hundred.  If it were me, I wouldn't spend the money on a mould until I knew for sure what size I needed.

You might also consider using buckshot, as the old timers did.  No. 1 buck measures .300", No. 1-1/2 buck is .310", and #0 measures .320".  My dad just about always used buckshot for shooting in his smallbore muzzleloaders, and Ned Roberts commented favorably on this practice in his book, The Muzzle-Loading Cap Lock Rifle.  The only issue might be that buckshot (even back then) was and still is generally made of an alloy somewhat harder than pure lead.  However, if buckshot works for you with this rifle, it's cheaper than cast or swaged round balls and you don't have to buy a mould or spend the time casting.  I'm willing to bet your new/old rifle has tasted buckshot before.

I also had a question.  There is a tool in that pouch that appears to have a dark wooden handle.  However, my vision is not great and I can't determine what the shank is made of, whether wood or iron.  Is it a short starter?  A screwdriver?  I honestly can't tell.

Anyway, you ended up with a nice rifle, and to have the original accoutrements with it, en suite, makes this outfit exceptional.

Best regards,

Notchy Bob
Title: Re: I found this rifle...
Post by: Nordnecker on September 28, 2019, 01:52:15 PM
Is the flap on that bag an actual beaver tail? It almost looks like it.
Title: Re: I found this rifle...
Post by: Squirrel pizza on February 12, 2020, 09:19:43 PM
Hey y'all, thinking of selling this rifle, bag and horn. I'd like some input on a fair price. I have a short video of me shooting the rifle. Can email it. I'm thinking $550 plus shipping? Or if you live within 100 miles of Crossville Tn I'll meet you and save shipping. Will be back and forth to N. Ga if that helps. Thanks, SP

Please keep in mind the picture of the target was shot with the (apparently) split shot fishing weights that were in the can in the possibles bag. I'm fairly certain it would do better with a real roundball.


Note from Moderator:  Please do not post inquiries or replies regarding the sale of this rifle here.  Use the thread in the For Sale section.  Here's a link  https://americanlongrifles.org/forum/index.php?topic=58270.0

Title: Re: I found this rifle...
Post by: rich pierce on February 12, 2020, 09:31:52 PM
How long is the barrel?
Title: Re: I found this rifle...
Post by: Squirrel pizza on February 12, 2020, 11:35:18 PM
Hey Rich, barrel length is 36 3/4.  15/16 ATF. Tried to weigh it on my digital bathroom scale but no luck. Closing my eyes it feels like the weight of a garrand, give or take. 8 lbs? +~-?
Title: Re: I found this rifle...
Post by: Squirrel pizza on February 12, 2020, 11:42:21 PM

(https://i.ibb.co/Wp4kNsv/IMG-7736.jpg) (https://ibb.co/dJwPs74)

(https://i.ibb.co/Dwrnpfs/IMG-7737.jpg) (https://ibb.co/ssWrH9k)

(https://i.ibb.co/7r6V6w0/IMG-7738.jpg) (https://ibb.co/WBYFYbR)

make a decision for me generator (https://freeonlinedice.com/)
Title: Re: I found this rifle...
Post by: mossyhorn on February 13, 2020, 12:15:20 AM
Squirrel Pizza please email or private message me as I live  near Carthage tn.
Title: Re: I found this rifle...
Post by: Ky-Flinter on February 13, 2020, 12:32:04 AM
Gentlemen,

Let's keep any discussion, replies, etc., regarding the sale of this rifle over in the thread in the For Sale section.  Here's a link  https://americanlongrifles.org/forum/index.php?topic=58270.0

-Ron