AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: yip on September 10, 2019, 04:15:08 PM
-
hello all, working on a Bucks County rifle and need some help with carving behind tang, need some photos of this area.
-
hello all, working on a Bucks County rifle and need some help with carving behind tang, need some photos of this area.
Try looking in the RCA books.
-
If you highlight "bucks county" and do a search and look at the images that come up then click on visit website you can get some pretty good pictures of the carving.
Like this ;
http://www.allenmartinrifles.net/gallery-of-guns-2/265-2/
-
Craving behind tang
I personally prefer hot Tang. I usually then crave crawfish. But that’s just me being born on the gulf coast and all.
All kidding aside, if you don’t find anything with a search, I’ll post whatever I can find in RCA.
-
Yip,
Take a look at the Jon Schuler here, http://www.antiquegunroom.net/ click on the antique guns tab, then choose the details tab at the Schuler gun.
Bill
-
Every time I drink TANG I find myself floating in 1/6th gravity on the Moon. I had to stop drinking TANG due to the inconvience of getting a ride back!!!!!!!!!!
Good luck with the carving!!
-
Design copied from an original rifle.
(https://i.ibb.co/7VTvsc5/32488-A75-AA32-43-BF-B559-DD6-C9-A490-DB9.jpg) (https://ibb.co/HYM75vs)
Ed
-
The KRA disks are a good resource. I highly recommend them.
http://kentuckyriflefoundation.org/krf-store/
-
thanks Ed thats all i need.
-
folks; just odered Rifles of upper Bucks County vol 1 issue x11 from K.R.F.!
-
folks; just odered Rifles of upper Bucks County vol 1 issue x11 from K.R.F.!
You will enjoy it. I couldn't do without my KRA disks now.