AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: hortonstn on September 11, 2019, 04:08:34 AM
-
Anyone seen any plans or how to build a round bottomed wood plan for cutting around cheekpiece?
-
Isn't gun making specific, but here is a bull nose plane I need to restore that could probably be modified to work very easily.
(https://i.ibb.co/BqmTpnT/15681650785148553580267907111804.jpg) (https://ibb.co/2gwc9Zc)
(https://i.ibb.co/ZL43V9Z/15681651031493702068668415106470.jpg) (https://ibb.co/5Mpd6Z7)
(https://i.ibb.co/TtBy5GQ/15681651204432352961384943791524.jpg) (https://ibb.co/4pZkxLb)
(https://i.ibb.co/yBDXNMt/15681651436329137801082231282893.jpg) (https://ibb.co/gFG3rXN)
(https://i.ibb.co/4784zgX/15681651687625014561312986135881.jpg) (https://ibb.co/HVtG6pb)
-
I bought a wooden scrub plane from Lee Valley about 6 years ago... it works great for that area of the stock.
Google scrub plane and I’m sure you’ll find something you’ll like.
John
-
Here's one on youtube, looks a bit big but probably could adapt it to whatever. I bought a couple different sizes at CLA I think his last name was Snyder.
https://www.youtube.com/watch?v=EEBtodEsENU&t=602s
-
I have two. One I modified for ramrod grooves, the other I use for concaving cheek pieces.
-
I bought two from Tom Snyder, one for roughing out a barrel channel and one for roughing out a ramrod groove. Google Snyder’s Custom Guns and you should find his contact info. He’s a great guy to deal with.
-
Anyone seen any plans or how to build a round bottomed wood plan for cutting around cheekpiece?
I can’t see how a plane does this job well if you mean defining a cheekpiece after the buttstock is rough shaped. Is this a rounded cheekpiece? Most rough in with a gouge and finish up with rasps then scrapers or sanding.
-
a No. 50 wood rasp is best tool I have found for that job
-
Go to YOUTUBE then find Paul Sellers web sight - he shows how to make a low budget molding plane. You can modify the style he shows to what you want but like Don said a wood rasp will do the job ;).
-
Thanks for your replies the reason i ask is in MARK SILVERS video TRADITIONAL GUNSTOCKING
he sure makes it look very tempting.
thanks again
-
Unless you're just set on making one, I'd second contacting Tom Snyder. He makes quite assortment that are well made and reasonably priced.
Jeff