AmericanLongRifles Forums

General discussion => Gun Building => Topic started by: bama on January 21, 2020, 06:00:08 PM

Title: John Davidson build (updated 3/25/2020)
Post by: bama on January 21, 2020, 06:00:08 PM
Here is the next project on the bench. The stock Blank is a piece of Freddy Harrison’s stump Maple. The barrel is  FCI Charley Burton, 54 cal 48” long custom profile. Chamber’s Golden Age lock. The triggers are made up from castings that I got from Jack Garner. They are very similar to the small Davis triggers. I have a enough of these castings to make up a 100 triggers. I should have them assembled hopefully by the CLA show in October if anyone is interested. 




(https://i.ibb.co/7bxdGPd/057-FB7-BF-C9-EA-4466-963-E-B3-A3-D4049636.jpg) (https://ibb.co/GFf4Vy4)

(https://i.ibb.co/5MNsZW3/F53305-BF-A570-4761-947-F-137889-BFBBAD.jpg) (https://ibb.co/Qb2Y0FV)

(https://i.ibb.co/FJc8gwn/9-C83-D6-E0-2-AC8-46-FC-8276-4-FF558133-EBC.jpg) (https://ibb.co/sQcsywt)

(https://i.ibb.co/GvpNhgN/B8-E873-BF-D0-B6-42-D1-8-C9-A-A328202-F3766.jpg) (https://ibb.co/1fQjSHj)

(https://i.ibb.co/nLfSnZd/AF207-C8-C-4270-4-EAC-AFD2-E91-BEC690-F27.jpg) (https://ibb.co/FDJt0NZ)

(https://i.ibb.co/G58GQz0/FBB21860-D08-E-4320-9841-E34-EE3419-CD3.jpg) (https://ibb.co/mc2d5fG)

(https://i.ibb.co/NtrR0yk/CB4-B8059-5-AFD-43-CE-ABBC-B46-CE1-DBE3-BF.jpg) (https://ibb.co/FmXpQDf)


Title: Re: John Davidson build
Post by: KC on January 21, 2020, 06:10:20 PM
I can't wait to see how this one turns out, I'm sure it will be a beauty.  Hopefully you'll post updated pictures as you work on it.
K.C.
Title: Re: John Davidson build
Post by: bama on January 21, 2020, 06:30:42 PM
I will post pictures as I go KC. I hope all is well with you and your family. This build will not be an exact copy but a rifle in the “style” so to speak. I will use his patch box design and base the carving on the Davidson rifle on Mark Elliott’s web site.
Title: Re: John Davidson build
Post by: Craig Wilcox on January 21, 2020, 06:59:41 PM
Jim, that wood has writing all over it, and those silly zebra stripes!  I think you need to send it to me and find a nice white piece of maple wood for that rifle.
You sure do a fine job of inletting.  I keep getting my Prussian blue all over the sides of the inlet, then I remove too much wood..  I got to stop doing that!
Going to make a work of fine art there.
Title: Re: John Davidson build
Post by: bama on January 21, 2020, 07:23:54 PM
Craig, my stocks used to be black from the inletting process. Over time (it only took 40 years) I have learned to use less transfer color and to keep my hands cleaner while inletting. The biggest help was when I started using candle soot for a transfer color. I seem to not get the soot all over everything.  ::)
Title: Re: John Davidson build
Post by: D. Taylor Sapergia on January 21, 2020, 07:40:09 PM
Craig:  the idea of the transfer colour is to show where there is too much wood for the part to go down into the inlet.  When you are done, there should be inletting colour over the entire edges of the inlet.  Inletting something like a patchbox requires several things:  a super sharp fine short bladed knife, close attention to the direction of the grain, and infinite patience.
Title: Re: John Davidson build
Post by: Craig Wilcox on January 21, 2020, 08:41:18 PM
Well, Taylor, I do manage to put a pretty fine edge on cutting implements, and I got me some new 3X magnifiers that focus about 15", giving me some elbow room.  I found it hard to work with the more customary Optivisors.
Now - patience!  Old Rhyme -

Patience is a virtue, possess it if you can,
Seldom in a woman, never in a man!!

Sometimes I have a lot, other times, none at all.   But all y'all really help a lot, either in relating "how I did it". or showing us in pictures what we should be doing.  You and Bama, a few others, really help a lot.
Title: Re: John Davidson build
Post by: bama on January 24, 2020, 02:16:25 AM
I got a little more work in on the project today. I got the butt plate installed and did a little rough shaping on the butt stock. There is still a ton of wood to remove.
(https://i.ibb.co/tMssMYT/3-A25-C99-A-512-F-4986-A178-E637-A01-ED959.jpg) (https://ibb.co/kg88gqs)

(https://i.ibb.co/my7xzb1/8-EA732-B4-54-EE-4-B9-D-9642-48-F5-B86-C0935.jpg) (https://ibb.co/wQ1v6B3)

(https://i.ibb.co/dM53PrW/B5-F9-BAAA-276-F-4-D7-B-B4-AD-205-B08-DF0154.jpg) (https://ibb.co/RbDM39v)

(https://i.ibb.co/7rZpprw/44693-E4-E-F529-4476-909-F-570-B61-A14849.jpg) (https://ibb.co/nQY11QH)

(https://i.ibb.co/2SWNLVq/264-EE8-D8-55-D9-49-AA-88-B1-035984-A66-FDE.jpg) (https://ibb.co/3v4z861)
Title: Re: John Davidson build
Post by: pjmcdonald on January 24, 2020, 03:05:05 AM
Jim,
I’ll be right over with my heavy rasps. Bet I can have that stock down to toothpicks and a pile of sawdust in no time!

Paul
Title: Re: John Davidson build
Post by: Stoner creek on January 24, 2020, 03:05:18 AM
By golly there's no waisting time in your shop!
Title: Re: John Davidson build
Post by: Marcruger on January 25, 2020, 01:06:15 AM
It already has nice lines in the buttstock.  Beautiful work as usual Jim.  God Bless,   Marc
Title: Re: John Davidson build
Post by: bama on January 25, 2020, 03:01:32 AM
Got the trigger guard filed and inlet. Hopefully I will finish rough shaping the butt stock and get a few holes drilled and tapped tomorrow.
(https://i.ibb.co/W3Ry0Ht/10057-B84-F0-D5-4596-8907-3-C8-ED61708-D8.jpg) (https://ibb.co/fSTp9Xv)
Title: Re: John Davidson build
Post by: bama on January 26, 2020, 02:00:45 AM
Today’s update. I took all of the excess wood off the butt stock and shaped up the lock panel. I rough shaped the side plate panel but need to make the side plate before going much farther.
(https://i.ibb.co/Nmn8D7F/265-A8410-9-F74-48-CA-A024-A26-FB50-ACCF3.jpg) (https://ibb.co/4Yg6vJF)

(https://i.ibb.co/p02wj85/9-CB3-B807-9609-47-F8-B489-6-F5-F42-AA9-A5-F.jpg) (https://ibb.co/smjR9Gz)

(https://i.ibb.co/nzP7m8g/09-D3-DAA5-A5-EB-4-BFD-81-F1-449-EFAE0-DF51.jpg) (https://ibb.co/3BRpdYr)
Title: Re: John Davidson build
Post by: Greg Pennell on January 26, 2020, 05:50:43 PM
No moss growing in Warrior Alabama!  Jim, you’ll be sighting that one in by the middle of the week!  Wish I had your work ethic...I get distracted too easily.

Greg
Title: Re: John Davidson build
Post by: bama on January 26, 2020, 07:55:44 PM
Thanks Greg, I have been blessed with work so I have to stay busy.  I am enjoying this build which also helps. This rifle has been on my want to build list for awhile. I finally got a customer that has family from over in the area an a ancester who fought in the in one the battles there. He wanted a rifle that his ancester could have used. My customer's initials are also JD so this rifle was a no brainer.  ;D
Title: Re: John Davidson build
Post by: bama on March 25, 2020, 11:09:20 PM
I had to pull off of this project for a few weeks and just getting started back up on it. I just made and installed the patch box and release so I thought I would post a little progress. I also made and installed the nose cap and pipes since my last post. I should be starting the carving tomorrow or Friday and will post a few pictures as I go along. Oh and I got the star made and inlet in the cheek piece.

This is a loose copy of the John Davidson rifle that Mark Elliott has posted on his web site if anybody wants to take a look at the original rifle.






(https://i.ibb.co/gWjkQYN/IMG-1707.jpg) (https://imgbb.com/)

(https://i.ibb.co/Q6GhBbh/IMG-1708.jpg) (https://imgbb.com/)

(https://i.ibb.co/YB4jYbh/IMG-1713.jpg) (https://imgbb.com/)

(https://i.ibb.co/VCfSSMT/IMG-1714.jpg) (https://imgbb.com/)

(https://i.ibb.co/sPj5CKk/IMG-1715.jpg) (https://imgbb.com/)

(https://i.ibb.co/5FfvvMn/IMG-1716.jpg) (https://imgbb.com/)

(https://i.ibb.co/5xD29HG/IMG-1687.jpg) (https://imgbb.com/)

(https://i.ibb.co/MRymjN1/IMG-1700.jpg) (https://imgbb.com/)

(https://i.ibb.co/9qzQ66V/IMG-1701.jpg) (https://imgbb.com/)

(https://i.ibb.co/NL0kbL8/IMG-1702.jpg) (https://imgbb.com/)

(https://i.ibb.co/VH8qBrC/IMG-1703.jpg) (https://imgbb.com/)

(https://i.ibb.co/Bf0Xjrh/IMG-1704.jpg) (https://imgbb.com/)

(https://i.ibb.co/3yDSxXQ/IMG-1667.jpg) (https://imgbb.com/)

(https://i.ibb.co/RCxBzR3/IMG-1668.jpg) (https://imgbb.com/)

(https://i.ibb.co/c2yqHrz/IMG-1669.jpg) (https://imgbb.com/)

(https://i.ibb.co/3FJ1Q5Z/IMG-1670.jpg) (https://imgbb.com/)

(https://i.ibb.co/q1vgxp4/IMG-1672.jpg) (https://imgbb.com/)

(https://i.ibb.co/G5CLyfJ/IMG-1674.jpg) (https://imgbb.com/)

(https://i.ibb.co/0Z9LSPD/IMG-1676.jpg) (https://imgbb.com/)

(https://i.ibb.co/rZ4nsw1/IMG-1677.jpg) (https://imgbb.com/)

(https://i.ibb.co/173hCzg/IMG-1678.jpg) (https://imgbb.com/)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: David Rase on March 25, 2020, 11:15:10 PM
Jim,
I have always liked the original John Davidson rifle.  I am enjoying watching you put together your rendition of this famous rifle.  Your build is taking shape and looking good.  I look forward to viewing your final product.
David
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on March 25, 2020, 11:21:08 PM
Thanks David, if all goes well I should have the carving and engraving done next week. If so I will post some more pictures.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Mike Brooks on March 26, 2020, 12:03:01 AM
Nice woik. Looks like you took more than "a  couple weeks" off. Time flys by doesn't it?
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Marcruger on March 26, 2020, 12:49:10 AM
Looking super Jim.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: helwood on March 26, 2020, 04:31:29 AM
This may sound crazy but my favorite Pic is in the second photo of the muzzle.  It is dead on.  When I look at a build I look at the lines and this is great.  Look forward to future pics.    Hank
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on March 26, 2020, 05:29:25 PM
Mike - 7 weeks & 3 days is a little more than a couple of weeks but then who's counting. Time do fly by when you are working for yourself and trying to keep up with the orders and show schedules. Never thought that I would consider being quarantined a blessing, it has made me slow down and get things done. I hope all is well down your way.

Thanks Marc for the kind words.

Hank, I was trying to show that I managed to get the end cap of the muzzle cap fairly consistent on both sides of the ram rod groove which is a problem for me sometimes. I never paid any attention to the stock profile past that point but now that you have mentioned it I did manage to get a nice slime fore stock.  ;D

Working from pictures and a few dimensions that Mark Elliot has on his web site this rifle may or may not be that close to the original. It will be a very nice, light and well balanced rifle. I used one of my Charley Burton custom profile barrels, 48" long 54 cal. for this build. I can't wait to shoot it in a few weeks.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on March 28, 2020, 03:11:57 AM
Added the carving layout for the butt stock.
(https://i.ibb.co/KbCcCqG/3-A34-F8-EF-5817-4-B60-96-CE-1-F0-BA2-B0-E8-AE.jpg) (https://ibb.co/5GqXq89)

(https://i.ibb.co/RhMn0mx/2442-E529-CAE0-4-B9-B-BE66-7-F7-A085-FE09-E.jpg) (https://ibb.co/yhMTy1w)

(https://i.ibb.co/D80z0gQ/2397-ADE8-F9-B8-4034-B78-A-F45-E572-F52-E1.jpg) (https://ibb.co/hZ3L31V)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on April 02, 2020, 09:04:22 AM
I have started the carving on this project. Here is a picture of the carving behind the cheek piece.


(https://i.ibb.co/M1bLNGz/221-DFF91-A1-C4-4-D69-9593-770-CAAFB5-E85.jpg) (https://ibb.co/gWGCgP0)

(https://i.ibb.co/f99W14R/C70-DC64-A-F4-D3-4-FE7-A4-E4-7-C976957-BEA5.jpg) (https://ibb.co/2SSrng2)

(https://i.ibb.co/rZzC4hM/4679191-E-6833-4-BF6-999-D-070-D21-C0-D733.jpg) (https://ibb.co/CnYkhyv)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: WestBranchSusquehanna on April 02, 2020, 01:46:24 PM
Jim, Wonderful carvings and what a gorgeous piece of wood.  Love the figure in it.  Can't wait to see the final finish.  Thanks for the posts!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: BOB HILL on April 02, 2020, 02:01:29 PM
Looking great. Jim.
Bob
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Mike Brooks on April 02, 2020, 03:46:29 PM
Bold!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: t.caster on April 02, 2020, 04:30:10 PM
Jim, Wonderful carvings and what a gorgeous piece of wood.  Love the figure in it.  Can't wait to see the final finish.  Thanks for the posts!

DITTO!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Marcruger on April 02, 2020, 04:35:04 PM
That carving really "pops" brother.  I like it.  Carry on.   :-)   God Bless,   Marc
Title: Re: John Davidson build (updated 3/25/2020)
Post by: rich pierce on April 02, 2020, 08:14:14 PM
Hot diggety!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on April 11, 2020, 03:35:22 PM
I got some engraving done on the patch box and toe plate.

(https://i.ibb.co/r7Rk1PD/BD0-EB12-D-BF41-4-FC7-BC54-BAA32-CD60172.jpg) (https://ibb.co/bWM18hc)

(https://i.ibb.co/L9v9kWH/B8-C0-EBF7-00-E4-4-C62-B3-AF-23-D63-A502495.jpg) (https://ibb.co/YfbfRMw)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: J. Talbert on April 11, 2020, 03:41:00 PM
Looking great Jim.

Jeff
Title: Re: John Davidson build (updated 3/25/2020)
Post by: BOB HILL on April 12, 2020, 01:21:38 AM
Very nice, Jim. Can't wait to see it finished
Bob
Title: Re: John Davidson build (updated 3/25/2020)
Post by: scottmc on April 12, 2020, 01:51:14 AM
That rifle's got a lot going on.  Beautiful work.  If u dont mind me asking....who is this John Davidson and where did he hail from?
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on April 12, 2020, 02:17:37 AM
John Davidson was a early Virginia gunsmith. He worked in Rockbridge County, Virginia in 1790 to 1832. He was born in 1757 and died in 1832 according to Wisker's Gunsmith of Virginia. His work is associated with the James River School.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on April 12, 2020, 02:27:12 AM
Here is a photo of the patch box of the rifle I am using as an example of his work. I have not tried to duplicate the engraving but use the original as a basis for my design. I changed the flowers to a little more boxy look, which after doing so I did not care for the change but I wanted there be be a noticeable difference and I definitely got that. Not bad, but not as appealing as I thought it would be.

I copied this photo from Mark Eliott's web site, I hope he does not mind me posting it here.

(https://i.ibb.co/GVk3qq3/AHDavison-patchbox-trimmed-800x559.jpg) (https://ibb.co/sFQJZZJ)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: B.Barker on April 12, 2020, 02:33:15 AM
Nice rifle Jim.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: scottmc on April 12, 2020, 03:30:48 AM
Thanks for the information.  Interesting original as well as your interpretation.  I like it!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on April 19, 2020, 08:13:20 AM
I got a little more engraving done on this project.


(https://i.ibb.co/JHgvnwk/9-D80-FD9-A-D51-C-42-D8-967-D-E52126-ABBBE9.jpg) (https://ibb.co/L1HxSXp)

(https://i.ibb.co/SNq6xtj/7570-CEF3-83-EF-42-B5-B71-F-8-BD32-BC952-D3.jpg) (https://ibb.co/y0LNR69)

(https://i.ibb.co/wYq0TYC/D8337-C0-B-31-B1-491-A-967-C-3-B8223-DE6-F10.jpg) (https://ibb.co/HXyF0XY)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Carl Young on April 19, 2020, 12:28:20 PM
That's going to be a real handsome rifle Jim. I particularly like the silver accents and engraving, enough but not too much. Hope all is well for you and Celeste.
Carl
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Jim Kibler on April 19, 2020, 10:27:28 PM
Looking like the real deal!  Nice.

Jim
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on May 01, 2020, 01:43:56 AM
I got the fore stock carving done, the wear plate installed and engraved and the lock plate polished and engraved. Now just a little more lock polishing and I will be ready to start the finishing process.

(https://i.ibb.co/pznFzxG/CEB050-E8-6-E2-B-4-D46-916-D-1-D0-F5255-F7-DD.jpg) (https://ibb.co/VS34Str)

(https://i.ibb.co/HDdvjcQ/2-EA9-D526-6154-4972-8-FB1-9-F72-BD7-F0-AFA.jpg) (https://ibb.co/Y7Z9x5G)

(https://i.ibb.co/FsmxT6h/990-CD81-C-6-B68-4-EDC-8-DA4-54-CF668-CF135.jpg) (https://ibb.co/M8Z20ng)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Bob McBride on May 01, 2020, 01:49:09 AM
Looking good Jim. Love the silver touches and engraving.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Joe Stein on May 01, 2020, 04:15:40 PM
That's really looking good.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: D. Taylor Sapergia on May 01, 2020, 07:57:53 PM
The rifle looks fantastic Jim...very much enjoying this thread.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on May 01, 2020, 08:29:28 PM
Thanks everyone, now if I just manage not to screw up the finishing.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Rajin cajun on May 02, 2020, 06:26:06 AM
Hey brother Jim, she’s looking great!  But we didn’t expect any less coming out of your shop. Great looking  rifle !
Title: Re: John Davidson build Finally finished
Post by: bama on May 23, 2020, 11:00:35 PM
Well I finally got the John Davidson rifle project finished. I am pleased with the rifle and I hope the new owner will be also. I will be test firing it in a day or two and will post the results. Thanks to all have looked and commented on this build.

Jim

(https://i.ibb.co/rxhcV5b/jd-2.jpg) (https://ibb.co/n7ynFQ3)

(https://i.ibb.co/gr25psr/jd-3.jpg) (https://ibb.co/7Sfw57S)

(https://i.ibb.co/1q4TNyt/jd-4.jpg) (https://ibb.co/zRtZg9T)

(https://i.ibb.co/jfJgK87/jd-5.jpg) (https://ibb.co/B3nqDf8)

(https://i.ibb.co/vxrfJBt/jd-6.jpg) (https://ibb.co/SX1HKxL)

(https://i.ibb.co/ZfLYN10/jd-7.jpg) (https://ibb.co/4FmYJgH)

(https://i.ibb.co/zx0K5wv/jd-8.jpg) (https://ibb.co/NCHw3zB)

(https://i.ibb.co/fCvhHQ5/jd-9.jpg) (https://ibb.co/nDCHjRv)

(https://i.ibb.co/BZxBfQK/jd-10.jpg) (https://ibb.co/QNRMJTj)

(https://i.ibb.co/BPLdqty/jd-12.jpg) (https://ibb.co/X4XNSb7)

(https://i.ibb.co/StXbCL6/jd11.jpg) (https://ibb.co/sKvnYBg)

(https://i.ibb.co/FHP00S0/jd13.jpg) (https://ibb.co/7k9RRwR)

(https://i.ibb.co/jWbP0Lg/jd14.jpg) (https://ibb.co/s6bdxFy)

(https://i.ibb.co/RbwqHBR/jd16.jpg) (https://ibb.co/pwFSXRY)

(https://i.ibb.co/Pt2S7jS/jd17.jpg) (https://ibb.co/8XyhWsh)

(https://i.ibb.co/ZHFjRxX/jd18.jpg) (https://ibb.co/XyKQftL)

(https://i.ibb.co/qYSdXkq/jd19.jpg) (https://ibb.co/0y7c8h4)

(https://i.ibb.co/x7GC60w/jd21.jpg) (https://ibb.co/tJcmDtn)

(https://i.ibb.co/CwBr2f0/jd22.jpg) (https://ibb.co/j8hpRS4)

(https://i.ibb.co/nfR2q5Z/jd23.jpg) (https://ibb.co/xG3vKRP)

(https://i.ibb.co/NLHS2vs/jd24.jpg) (https://ibb.co/CnT2Kcz)
Title: Re: John Davidson build (updated 3/25/2020)
Post by: rich pierce on May 23, 2020, 11:03:57 PM
Nicely done! Great project.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: flinchrocket on May 23, 2020, 11:20:14 PM
That's a beautiful rifle. Your engraving really looks the period.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Rajin cajun on May 24, 2020, 01:02:28 AM
That’s a great body of work Mr. Parker.  I know two men who will be smiling, the owner of that great rifle you just completed, and Mr. John Davidson himself. I’m sure he would be saying,”Well done son” As usual great work Jim !



Bob
Title: Re: John Davidson build (updated 3/25/2020)
Post by: utseabee on May 26, 2020, 03:45:32 AM
That's an awesome looking rifle Jim.
Title: Re: John Davidson build (updated 3/25/2020)
Post by: Stoner creek on May 26, 2020, 04:53:43 AM
 That gun bears a lot of resemblances to a Davidson gun in my collection! Nice job Jim!!!
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on May 26, 2020, 05:09:42 AM
Stoner, it should resemble your rifle. It was on the bench next to this build for pretty much most of the build. I appreciate the loan of your rifle, it was indeed a big help.  ;D ;D
Title: Re: John Davidson build (updated 3/25/2020)
Post by: BOB HILL on May 26, 2020, 05:31:26 AM
Outstanding, Jim. Thanks for sharing this project will us.
Bob
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on June 16, 2020, 01:40:45 PM
The John Davidson rifle went home to Florida yesterday. It functioned flawlessly and for the first time firing a flintlock the new owner did quite well.


(https://i.ibb.co/0ZXgGf3/7-E39-BD57-E90-D-4-E98-B9-DE-349-DAD253-C6-F.jpg) (https://ibb.co/nf0HLDS)

(https://i.ibb.co/MRSpySn/A526-EA79-B3-CF-4044-8-CA6-4-B4331579852.jpg) (https://ibb.co/vJqmCq1)

https://www.instagram.com/p/CBeWu6zlU3A/?igshid=182pv99c7jnow


Title: Re: John Davidson build (updated 3/25/2020)
Post by: Greg Pennell on June 16, 2020, 03:02:45 PM
Great rifle, Jim...and look what a smile on the new owners face!  He certainly picked a fine rifle for his first muzzleloading rifle!

Awesome!

Greg
Title: Re: John Davidson build (updated 3/25/2020)
Post by: smart dog on June 17, 2020, 04:26:31 PM
Hi Jim,
Great authentic rifle!!  Is the barrel rust blued?  It has a really deep color.

dave
Title: Re: John Davidson build (updated 3/25/2020)
Post by: bama on June 18, 2020, 04:50:09 AM
Thanks everyone who have followed this thread and everyone who has commented. Dave , I did rust blue the barrel and the lock.