AmericanLongRifles Forums
General discussion => Shop Made Tools => Topic started by: Maineshops on October 22, 2020, 12:29:57 AM
-
A little jig to bevel the side plates. One is about 10deg. For the back side and one about 45deg. For the front. Took longer to make than it took to bevel two side plates but helped with the old hands
(https://i.ibb.co/gWNXPLF/DD51222-A-C4-DB-429-F-ACB8-0-E1-FD33750-E7.jpg) (https://ibb.co/M1rjGx5)