AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: Eseabee1 on May 23, 2021, 02:56:41 AM
-
Was finally able to get back in the shop after a couple set backs from surgery. Spent about 5 hours out there today and this was the results. Going to try and do some engraving on both the horn and the container. The horn is around 12 inches outside curve with a 2 1/2 inch diameter Base plug which is hollowed out. Tip is applied and is a two part antler tip. The horn container is about 5 inches tall and 4 inch diameter at the base and 3 inches near the top. Has a turned Horn finial.
(https://i.ibb.co/gjKfsXV/DAC82-FE4-9-FC2-4855-A827-0-F3769-FA148-A.jpg) (https://ibb.co/GxS8g1T)
(https://i.ibb.co/c2PcSCy/2275-E0-EA-79-C4-42-C4-B5-B9-46-CC936-ED7-EF.jpg) (https://ibb.co/HG0DfxK)
(https://i.ibb.co/0r8L26W/20-A45851-4-B8-B-41-C6-AFF3-AAC96-EDAB87-B.jpg) (https://ibb.co/VTrG9zh)
(https://i.ibb.co/tqF44mT/378-C3-B6-E-FFDB-47-D8-AFB5-B25-FB6504607.jpg) (https://ibb.co/T4dkkvx)
(https://i.ibb.co/wwXLHLP/F19-CF0-CB-CF7-B-426-F-9-C5-F-99-C9-AC21-B573.jpg) (https://ibb.co/D8ybXbv)
-
Beautiful work, both pieces! Thanks for the inspiration!
Greg
-
Glad things are working out. Good looking horns, I like the finish on the container cap, what did you use?
Tim
-
Glad things are working ot. Good looking horns, I like the finish on the container cap, what did you use?
Tim
Tim I use Acks wood paste. First after I sanded it to 400 grit I used their abrasive paste then use the polishing paste. It’s food safe moisture of beeswax mineral oil and carnauba wax. https://ackswoodpaste.com/
-
Nice looking pair, Ed.
Bob
-
Glad things are working ot. Good looking horns, I like the finish on the container cap, what did you use?
Tim
Tim I use Acks wood paste. First after I sanded it to 400 grit I used their abrasive paste then use the polishing paste. It’s food safe moisture of beeswax mineral oil and carnauba wax. https://ackswoodpaste.com/
Forgot to add the stain I used was Homer Danglers reddish brown. I got it from the log cabin shop
-
Thanks Ed. What's the wood Ash?
Tim
-
Thanks Ed. What's the wood Ash?
Tim
Was suppose to be curly maple. But it was not that great.
-
Fooled me. TC
-
Love both of them Ed, especially the container.