AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: runastav on September 20, 2021, 05:07:27 PM
-
Hi all! This muskett need some work, starting with the barrel who was cut down silversolder a new stud on ;)
Runar
(https://i.ibb.co/grNXMDF/IMG-56061.jpg) (https://imgbb.com/)
(https://i.ibb.co/0tXvxgG/IMG-56051-2.jpg) (https://imgbb.com/)
(https://i.ibb.co/2SJrrzv/IMG-56071.jpg) (https://imgbb.com/)
(https://i.ibb.co/JFjnr89/DSCN6715.jpg) (https://ibb.co/1JGZRBk)
(https://i.ibb.co/wBNQNtg/DSCN6716.jpg) (https://ibb.co/gmMWMY9)
(https://i.ibb.co/99TT3gJ/DSCN6717.jpg) (https://ibb.co/tMssPKS)
(https://i.ibb.co/dfjgj5H/DSCN6718.jpg) (https://ibb.co/0nmtmGz)
(https://i.ibb.co/Jy6FktZ/DSCN6719.jpg) (https://ibb.co/yYvBsP2)
(https://i.ibb.co/DwycdZ8/DSCN6720.jpg) (https://ibb.co/MP4wdmG)
-
I take it, this is a smooth bore?
-
Yes LilysDad its a smoothbore! New forestock made.
Runar
(https://i.ibb.co/hYfNsgL/DSCN6752.jpg) (https://ibb.co/FHV16hm)
(https://i.ibb.co/6sbT3pk/DSCN6753.jpg) (https://ibb.co/0JZ6gWx)
(https://i.ibb.co/CJGrfVK/DSCN6754.jpg) (https://ibb.co/Q8w54Yv)
(https://i.ibb.co/VB5tVLg/DSCN6757.jpg) (https://ibb.co/h8wysgB)
(https://i.ibb.co/r0snG96/DSCN6758.jpg) (https://ibb.co/JtQXRZ7)
(https://i.ibb.co/0jZVnWW/DSCN6760.jpg) (https://ibb.co/JR2Fcbb)
(https://i.ibb.co/n0Tvjd3/DSCN6761.jpg) (https://ibb.co/pPg8dVW)
(https://i.ibb.co/kxf5Dhp/DSCN6764.jpg) (https://ibb.co/L8WYgCM)
-
always appreciate watching your work! an Artist, for sure!!!
Respect Always
Metalshaper/Jonathan
-
Hi all, and thank you Metalshaper! So its the brass frontband!
Runar
(https://i.ibb.co/tYytD70/DSCN6765.jpg) (https://ibb.co/nQhvjHX)
(https://i.ibb.co/tCb6M4S/DSCN6766.jpg) (https://ibb.co/GPVDv0X)
(https://i.ibb.co/r3qs9LF/DSCN6767.jpg) (https://ibb.co/qCh5647)
(https://i.ibb.co/1nxHVn5/DSCN6768.jpg) (https://ibb.co/TT5zXTS)
(https://i.ibb.co/H7GsKNK/DSCN6769.jpg) (https://ibb.co/LS9W0Q0)
(https://i.ibb.co/2K7MZhH/DSCN6770.jpg) (https://ibb.co/12fXzQj)
(https://i.ibb.co/MCknTWk/DSCN6771.jpg) (https://ibb.co/2k3q2m3)
(https://i.ibb.co/VxMpx4x/DSCN6774.jpg) (https://ibb.co/Lr9hr7r)
(https://i.ibb.co/B6gBYQg/DSCN6775.jpg) (https://ibb.co/kDhXPwh)
(https://i.ibb.co/wdDdq02/DSCN6776.jpg) (https://ibb.co/sgLg4mX)
-
Amazing! Following your progress
-
Runar, you are amazing! Thank you for letting us follow along. Yay Runar. :-)
-
Runar, you never cease to amaze me.
Well done.
-
Runar, again fabricator extrordenair.
-
Runar, I did more than my share of silver soldering repairing equipment in the dairy industry back in the '70's. Your sheetmetal fabricating skills continue to amaze me.
Dave
-
Thank you all! The bayonet stop and lock in place.
Runar
(https://i.ibb.co/t4b6Bwq/DSCN6844.jpg) (https://ibb.co/6m4SYcH)
(https://i.ibb.co/JqgXYBp/DSCN6846.jpg) (https://ibb.co/pQ5CH0K)
(https://i.ibb.co/CW76G7h/DSCN6847.jpg) (https://ibb.co/x3jYTjJ)
(https://i.ibb.co/2Wb3V7k/DSCN6848.jpg) (https://ibb.co/pbmjVvL)
(https://i.ibb.co/XkJx2rj/DSCN6850.jpg) (https://ibb.co/HpgTFfB)
-
Hi all! front Sight, ramrod and band lock spring made and in place.
Runar
(https://i.ibb.co/FnwQWwQ/DSCN6853.jpg) (https://ibb.co/V3SFNSF)
(https://i.ibb.co/mH9bTqB/DSCN6854.jpg) (https://ibb.co/LCxYRtP)
(https://i.ibb.co/v1y7rRH/DSCN6855.jpg) (https://ibb.co/K64MQSX)
(https://i.ibb.co/CV4Jrhj/DSCN6858.jpg) (https://ibb.co/YfJDrp5)
(https://i.ibb.co/SNrrRP1/DSCN6889.jpg) (https://ibb.co/XX88Sbd)
(https://i.ibb.co/BV0ZrX9/DSCN6890.jpg) (https://ibb.co/fYjpnhs)
(https://i.ibb.co/H202MDL/DSCN6891.jpg) (https://ibb.co/j5d5xv9)
(https://i.ibb.co/x3MbJQ4/DSCN6892.jpg) (https://ibb.co/JCzT5Ph)
-
Runar, great work you are truly a “ Gunmaker”. !
Thanks for sharing.
Bob
-
Hi all! and thank you Rajin cajun! I reame the barrel to 18mm in my vertikal maskin ;)
Runar
(https://i.ibb.co/GdBzxQR/DSCN6894.jpg) (https://ibb.co/K5RT0xW)
(https://i.ibb.co/X3V6J5W/DSCN6895.jpg) (https://ibb.co/MG9KN1g)
(https://i.ibb.co/bQq5SrW/DSCN6896.jpg) (https://ibb.co/pbGjt30)
(https://i.ibb.co/VS7t8gf/DSCN6897.jpg) (https://ibb.co/0Mgc3CH)
(https://i.ibb.co/3Thb6s8/IMG-20210914-161634.jpg) (https://ibb.co/D1KFcb6)
(https://i.ibb.co/8gbwRVh/DSCN6898.jpg) (https://ibb.co/m50KY7x)
(https://i.ibb.co/3mLkqfW/DSCN6899.jpg) (https://ibb.co/PGftnT4)
(https://i.ibb.co/gSmX1z4/DSCN6904.jpg) (https://ibb.co/zXQLcG6)
-
Hi all! The muskett is now ready, photos show the M/1843 and the pillar rifle M/1843/58 and the scrath build M/1843 naval pistol
Runar
(https://i.ibb.co/RYq9yHw/DSCN6957.jpg) (https://ibb.co/ZG0VmTD)
(https://i.ibb.co/Tt8hrw6/DSCN6958.jpg) (https://ibb.co/BBZswfb)
(https://i.ibb.co/bgfQsYB/DSCN6959.jpg) (https://ibb.co/TBCY4J8)
(https://i.ibb.co/jw1htKM/DSCN6960.jpg) (https://ibb.co/PWfxkph)
(https://i.ibb.co/zPckn8y/DSCN6961.jpg) (https://ibb.co/xzv4Cmp)
(https://i.ibb.co/tcZsnbZ/DSCN6962.jpg) (https://ibb.co/ctbFRNb)
(https://i.ibb.co/twfrxSJ/DSCN6963.jpg) (https://ibb.co/V0y4Qdq)
(https://i.ibb.co/gr6NDR3/DSCN6964.jpg) (https://ibb.co/10b19mL)
(https://i.ibb.co/dDmbQxC/DSCN6965.jpg) (https://ibb.co/qpJ0RVq)
(https://i.ibb.co/0qc3Vf2/DSCN6966.jpg) (https://ibb.co/Tck5qH2)
-
As usual, excellent work!!
-
Runar, I like what you're doing. Could you please explain your reaming outfit? It looks to me like it works from the breach to the muzzle with the weight providing downward pressure on the barrel. What is the purpose of the wooden pegs on the left side of the post?
Dsave
-
Hi all and thank you!Not English, hehe the pegs is from it was handriven and laying horisontal like Bookies model ;)But I reawork it see this tread? https://americanlongrifles.org/forum/index.php?topic=65947.0
Runar
-
Runar, thanks for pointing me to your previous thread. I did not think much about it until I saw the photos in this thread. It really makes sense now.
-
Hi all! and thank you Not English! Again I get my hands in one Norwegian Naval muskett m/1843 who needs a BIG rebuild! I bought it online auction. It ended way to expesive, but its rarely guns only made 1790 (1845-49) and many was reabuild to pilar rifles. Ok, when its arrived I was very disappointed the barrel was NOT original. @!*%?&, just before I return it but why not mount a new(Old barrel) and reabuild it for a shooter ;)
Runar
(https://i.ibb.co/VL7kMgn/38303-1.jpg) (https://ibb.co/fXhTrk6)
(https://i.ibb.co/6DzxRw1/38303-2.jpg) (https://ibb.co/xzW0SLf)
(https://i.ibb.co/8mrL8DC/DSCN1163.jpg) (https://ibb.co/Rg3kHpF)
(https://i.ibb.co/h1dKd8c/DSCN1164.jpg) (https://ibb.co/VpCvCBx)
(https://i.ibb.co/hfyxd8Y/DSCN1165.jpg) (https://ibb.co/tX4w2CL)
-
Hi all!
Ok, I start with reabuild a Swedish muskett barrel
Runar
(https://i.ibb.co/QkwcY4k/DSCN1168.jpg) (https://ibb.co/xYTszNY)
(https://i.ibb.co/5KpPX47/DSCN1169.jpg) (https://ibb.co/XY0qfLw)
(https://i.ibb.co/VxFMsP6/DSCN1170.jpg) (https://ibb.co/W0rBLYC)
(https://i.ibb.co/6rbwCk7/DSCN1173.jpg) (https://ibb.co/pbZwFSB)
(https://i.ibb.co/N2Hg1YG/DSCN1182.jpg) (https://ibb.co/tpWwZC1)
(https://i.ibb.co/rkpdYYB/DSCN1183.jpg) (https://ibb.co/wyQcVVn)
(https://i.ibb.co/Zg9g6Pm/DSCN1184.jpg) (https://ibb.co/Ydgd7MZ)
(https://i.ibb.co/V2S52tq/DSCN1186.jpg) (https://ibb.co/BqZFqtC)
(https://i.ibb.co/zZWzLmd/DSCN1188.jpg) (https://ibb.co/RcGqMg8)
(https://i.ibb.co/ZGBzxwT/DSCN1189.jpg) (https://ibb.co/k542Xrc)
-
Hi all! New pistong, new mainspring its a litle complikated this backaction so I made a jig ;)
Runar
(https://i.ibb.co/XS5sGjD/DSCN1228.jpg) (https://ibb.co/dGp2Hjt)
(https://i.ibb.co/pQymG6C/DSCN1279.jpg) (https://ibb.co/jzRpB97)
(https://i.ibb.co/YT7Vp5D/DSCN1203.jpg) (https://ibb.co/M5DJMz8)
(https://i.ibb.co/4134j8P/DSCN1204.jpg) (https://ibb.co/bbDNrsz)
(https://i.ibb.co/WDsNFgM/DSCN1205.jpg) (https://ibb.co/xm3KGJB)
-
You are very good at problem solving. I admire the way you go about your work.
-
I really like the jig to form the hook on the end of the main spring. Very good idea i shall file away for future use.
-
I always enjoy reading your rebuild stories (Sagas?)! Your talent and resourcefulness in figuring out how to fix things is amazing. I'm sure this comes from many years of practice on other projects you've completed. Thanks for sharing!!
Stuart
-
You are a craftsman Sir...!
Bob
-
Hi all! And thank you so much guys! New forestock glued under the midth band.
Runar
(https://i.ibb.co/0r934XJ/DSCN1295.jpg) (https://ibb.co/nj1Sd0k)
(https://i.ibb.co/GxjLS0q/DSCN1296.jpg) (https://ibb.co/r7JSrmV)
(https://i.ibb.co/rGS2Z7p/DSCN1297.jpg) (https://ibb.co/FbM4BxY)
(https://i.ibb.co/QrxbqTd/DSCN1300.jpg) (https://ibb.co/NZGVkJS)
(https://i.ibb.co/2Kvctt0/DSCN1301.jpg) (https://ibb.co/12rRqqY)
(https://i.ibb.co/6sdcJCG/DSCN1302.jpg) (https://ibb.co/cTmKXnR)
-
Hi all! Frontband made ;)
Runar
(https://i.ibb.co/f20DJmy/DSCN1305.jpg) (https://ibb.co/808YkFf)
(https://i.ibb.co/8BcHkDd/DSCN1306.jpg) (https://ibb.co/qn5v6MW)
(https://i.ibb.co/7JVHVNd/DSCN1307.jpg) (https://ibb.co/fYtbtGz)
(https://i.ibb.co/VQfzPQs/DSCN1308.jpg) (https://ibb.co/4YhX5YH)
(https://i.ibb.co/C7mR2vv/DSCN1310.jpg) (https://ibb.co/cFk4Ltt)
(https://i.ibb.co/nQjTDsX/DSCN1311.jpg) (https://ibb.co/KVWY9jt)
(https://i.ibb.co/sHPCKtD/DSCN1312.jpg) (https://ibb.co/cLvw6xp)
(https://i.ibb.co/yRrvjF6/DSCN1316.jpg) (https://ibb.co/z5z9vVX)
-
Runar, I think your version looks much better than the originals.
How did you form the round brass tube into that shape? The bend looks clean and crisp where you change the diameters.
-
Runar, you should do a tutorial on forming barrel bands. You seem to really have the method down.
-
Thank you guys! Forming is easy anneale wery often and I use forming dies , and silversold one bit at time
Runar
(https://i.ibb.co/HC1mx4P/DSCN6766.jpg) (https://ibb.co/C6NxM89)
(https://i.ibb.co/KFSwqMY/DSCN6767.jpg) (https://ibb.co/gzhVT5G)
-
Hi all! Band lock spring made
Runar
(https://i.ibb.co/5WNNkx9/DSCN1317.jpg) (https://ibb.co/C5kk6st)
(https://i.ibb.co/6ngPYCD/DSCN1318.jpg) (https://ibb.co/mD6qJWh)
(https://i.ibb.co/5shcz4X/DSCN1319.jpg) (https://ibb.co/SVwv1yD)
-
Hi all!
In the (White ;))
Runar
(https://i.ibb.co/qpBvmtv/DSCN1320.jpg) (https://ibb.co/M7nmPYm)
(https://i.ibb.co/BBgHXws/DSCN1321.jpg) (https://ibb.co/4pjw6JN)
(https://i.ibb.co/bssWkCk/DSCN1322.jpg) (https://ibb.co/K220JfJ)
(https://i.ibb.co/jHkxhZJ/DSCN1323.jpg) (https://ibb.co/pnjs2rh)
(https://i.ibb.co/f1mQgqs/DSCN1324.jpg) (https://ibb.co/M2q9vZm)
(https://i.ibb.co/PYF60t4/DSCN1325.jpg) (https://ibb.co/fSqxLQt)
(https://i.ibb.co/TMzWLQV/DSCN1326.jpg) (https://ibb.co/GQgHTZK)
-
Runar, you are an amazingly talented builder.
-
Hi all! and thank you Daryl! Muskett done, and photo show my # 1-2-3 rebuilds ;)
Runar
(https://i.ibb.co/74H09Cj/DSCN1414.jpg) (https://ibb.co/m8mPxTb)
(https://i.ibb.co/JvrCpvW/DSCN1415.jpg) (https://ibb.co/0CYQ9Cp)
(https://i.ibb.co/y0RZ8y0/DSCN1416.jpg) (https://ibb.co/v1BTJP1)
(https://i.ibb.co/1ZCjbWx/DSCN1417.jpg) (https://ibb.co/qBHVxQw)
(https://i.ibb.co/WgJ4NCy/DSCN1418.jpg) (https://ibb.co/Tm3xDy8)
(https://i.ibb.co/9Zc6H1Z/DSCN1419.jpg) (https://ibb.co/NTt52JT)
(https://i.ibb.co/xg3yBr5/DSCN1420.jpg) (https://ibb.co/hdCk4T8)
(https://i.ibb.co/kJrYR01/DSCN1421.jpg) (https://ibb.co/gdXs5wV)
(https://i.ibb.co/rZytqs9/DSCN1422.jpg) (https://ibb.co/SKvxHrS)
(https://i.ibb.co/z8NX40B/DSCN1423.jpg) (https://ibb.co/SQJt39M)
(https://i.ibb.co/9w7FMtN/DSCN1424.jpg) (https://ibb.co/B49X1Nt)
(https://i.ibb.co/LtznyyD/DSCN1425.jpg) (https://ibb.co/BZVqJJH)
(https://i.ibb.co/gPXYCWJ/DSCN1426.jpg) (https://ibb.co/rcL9JpH)
(https://i.ibb.co/gPysvKf/DSCN1427.jpg) (https://ibb.co/wwyDJmP)
top image hosting (https://nb.imgbb.com/)
-
Nice work Runar
Dennis
-
Thank you Dennis!
Runar
-
I always enjoy reading your rebuild stories (Sagas?)! Your talent and resourcefulness in figuring out how
to fix things is amazing. I'm sure this comes from many years of practice on other projects you've completed. Thanks for sharing!!
Stuart
Definitly a saga, Runastav is born and raised on an Island once the home to the Norwegian viking king Harald Hårfagre 🙂Karmøy,,
-
Very nice work
-
This viking does a amazing job
Hawkeye from Belgium
-
Thank you guys from a rusty viking ;)
Runar
-
Super!