AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Bill Raby on September 26, 2021, 09:18:20 AM
-
I started the next project. This one is a Maryland rifle. I am doing another video series. Just posted the first one on Rumble. So far I have the the first 12 videos finished. All of those are on Patreon now. I am posting them on Patreon as soon as they are finished and posting one on Rumble every weekend. I am following the same format as I have on my other videos. I am trying to go into more detail on the basic stuff than I have in the past. Most of the people that watch my videos are first time gun builders or interested in giving it a try. Many don't have a lot of experience working with tools. There are so many that would like to build guns but never do because they assume it is beyond what they are capable of. They give up before they even take the first step. The idea is to get those guys to realize that building a gun is something they can actually do and to help them out along the way.
Its almost time to start those winter projects. Hopefully this will inspire a few of you take that big leap and start building. The first video is just an introduction to what the project will be and show the parts I will be using. Next weekend I will be posting the video where the work starts.
Part 1
https://rumble.com/vmz1z3-maryland-rifle-build-part-1.html
-
Good luck building it.
It's a nice gun.
Maybe you like the crisp lines on the butt stock.
Adrie
https://americanlongrifles.org/forum/index.php?topic=61014.msg611509#msg611509
-
Great to see you’re starting yet another build! I’ll be watching on Rumble and I hope you can get around too uploading the Tenn. rifle series as well. Thanks for all you do!
Jeff
-
Part 2
https://rumble.com/vn8fcx-maryland-rifle-build-part-2.html
-
Thanks Bill I like your videos and speaking of them.............where is #3!
Rob
-
#3 is coming saturday.
-
Thanks Bill I will be looking for it!
Rob
-
As will I. This looks like it’s gonna be a pretty one.
-
Part 3
https://rumble.com/vniahp-maryland-rifle-build-part-3.html
-
Thanks Bill,
Rob
-
Part 4
https://rumble.com/vnt8mt-maryland-rifle-build-part-4.html
-
Part 5
https://rumble.com/vo4fi8-maryland-rifle-build-part-5.html
-
Great news Bill!
-
https://rumble.com/vogeed-maryland-rifle-build-part-6.html
-
I get a lot of questions about what tools I am using and what tools to start off with. So I did a video on that.
https://rumble.com/vop77n-maryland-rifle-build-tools.html
-
Part 7
https://rumble.com/votmc2-maryland-rifle-build-part-7.html
-
Hi Bill,
I have been enjoying your video's. The tool's episode was interesting not trying to tell you what you should do but I would be interested in how you sharpen your chisels and gouges I am sure others who follow you would too.
Thanks,
Rob
-
There are lots of videos out there showing all different ways to sharpen chisels. I just don't see how I would have much to add to to it.
-
Part 8
https://rumble.com/vp5xbj-maryland-rifle-build-part-8.html
-
Hi Bill,
My suggestion wasn't to add to the sharpening video's but to see how you sharpen for the way you build your rifles. I know for me it took a lot of trial and error to learn to sharpen and I use primarily a Tormek system but still use oil stones and diamond stones too.
Rob
-
I keep hearing from people asking for sharpening video so I will probably do one fairly soon.
-
Hi Bill,
Its no small effort to put out so many videos over not just a few rifle builds I for one appreciate your work on them and I will be interested in a sharpening one when you do one.
Thanks,
Rob
-
I have as much fun doing the video as I do building the rifles.
-
Bill, I have a Rice Southern Mountain rifle barrel that was fitted with the same breech plug as the one you modified in part 8. My question is this, can I buy a plug with a long tang and shape it to the “lollipop” profile or would it be wiser to purchase one that’s already formed to that shape? Of course I understand that I must match the thread size and fit the plug properly.
-
If you like the tang that is available, go with that. If you want something different, then forming one from a long tang will work just fine also. Nothing hard about changing shape of the tang. It all just comes down to how you want it to look in the end.
-
Part 9
https://rumble.com/vpin26-maryland-rifle-build-part-9.html
-
I have gotten a number of requests for a video about how I sharpen chisels. So here it is
https://rumble.com/vpk82o-maryland-rifle-build-sharpening-chisels.html
-
Hi Bill,
Thanks for the sharpening video it was interesting to see your approach,.
Rob
-
Part 10
https://rumble.com/vpv5b2-maryland-rifle-build-part-10.html
-
Part 11
https://rumble.com/vq799s-maryland-rifle-build-part-11.html
-
Bill, enjoying the series and I have a question since I’m getting close to where I need to polish all my metal fixtures. Where can I find a slotted bit like the one you use with the Foredom tool? I recently got one but haven’t rounded up much for bits and such. I like the way you’re able to get in the tight spots with the emery cloth. Thanks for doing what you do!
-
Rio Grande has everything you could ever want.
https://www.riogrande.com/category/tools-and-equipment
-
Oh boy. Another rabbit hole for me to run straight down into, lol. Thanks Bill.
-
Part 12
https://rumble.com/vqkjfx-maryland-rifle-build-part-12.html
-
Part 13
https://rumble.com/vqzk8t-maryland-rifle-build-part-13.html
-
Part 14
https://rumble.com/vrdmuw-maryland-rifle-build-part-14.html
-
Part 15
https://rumble.com/vrqgld-maryland-rifle-build-part-15.html
-
Part 16
https://rumble.com/vs5xjw-maryland-rifle-build-part-16.html
-
Part 17
https://rumble.com/vsmi2d-maryland-rifle-build-part-17.html
-
Part 18
https://rumble.com/vt1x5f-maryland-rifle-build-part-18.html
-
Part 19
https://rumble.com/vtj4a1-maryland-rifle-build-part-19.html
-
Mr. Raby, it is your fault that I am trying to build a rifle. Thanks for the videos!
-
Build a good one!
-
ARe you going to be posting the videos on Rumble that Scr*wTube took down?
-
I had all of those videos backed up on an external hard drive. Then I moved last year. That external hard drive vanished somewhere in the move. I know it is here in the house somewhere, but not sure where. It will turn up eventually. I will post all of it when it does.
-
Good! They are completely worthwhile.
-
Part 20
https://rumble.com/vu3o2s-maryland-rifle-build-part-20.html
-
Thanks for the videos Bill
Rob
-
Part 21
https://rumble.com/vuqkni-maryland-rifle-build-part-21.html
-
Part 22
https://rumble.com/vvaw7w-maryland-rifle-build-part-22.html
-
Part 23
https://rumble.com/vvwzcv-maryland-rifle-build-part-23.html
-
Part 24
https://rumble.com/vwhpjn-maryland-rifle-build-part-24.html
-
Part 25
https://rumble.com/vx67cd-maryland-rifle-build-part-25.html
-
Part 26
https://rumble.com/vxucbf-maryland-rifle-build-part-26.html
-
Part 27
https://rumble.com/vyjtbx-maryland-rifle-build-part-27.html
-
Part 28
https://rumble.com/vzdtj0-maryland-rifle-build-part-28.html
-
Part 29
https://rumble.com/v10cdns-maryland-rifle-build-part-29.html
-
Part 30
https://rumble.com/v1167rd-maryland-rifle-build-part-30.html
-
Part 31
https://rumble.com/v1214dg-maryland-rifle-build-part-31.html
-
Part 32
https://rumble.com/v1306w3-maryland-rifle-build-part-32.html
-
Part 33
https://rumble.com/v13u5ub-maryland-rifle-build-part-33.html
-
Part 34
https://rumble.com/v14p8rd-maryland-rifle-build-part-34.html
-
You’ve got a mouse in your shop, Bill 😁
Bob
-
That mouse sure had perfect timing!
-
Nice Videos. They've got me confident I can build one from a plank
-
It is actually easier than starting with one of the kits.
-
Part 35
https://rumble.com/v15j4m9-maryland-rifle-build-part-35.html
-
Part 36
https://rumble.com/v16ee7k-maryland-rifle-build-part-36.html
-
Part 37
https://rumble.com/v179ptq-maryland-rifle-build-part-37.html
-
Part 38
https://rumble.com/v182bq7-maryland-rifle-build-part-38.html
-
Part 39
https://rumble.com/v18v459-maryland-rifle-build-part-39.html
-
Part 40
https://rumble.com/v19sz4n-maryland-rifle-build-part-40.html
-
Part 41
https://rumble.com/v1asd1o-maryland-rifle-build-part-41.html
-
Part 42
https://rumble.com/v1bltad-maryland-rifle-build-part-42.html
-
Good to see you still at it Bill. Hope the new digs are working out. Great series.
-
Great to hear from you! I am hoping to see some more Black Powder TV.
-
Part 43
https://rumble.com/v1cgdn7-maryland-rifle-build-part-43.html
-
Part 44
https://rumble.com/v1daof7-maryland-rifle-build-part-44.html
-
Part 45
https://rumble.com/v1e4pcl-maryland-rifle-build-part-45.html
-
Part 46
https://rumble.com/v1eybph-maryland-rifle-build-part-46.html
-
Part 47
https://rumble.com/v1ftv13-maryland-rifle-build-part-47.html
-
Part 48
https://rumble.com/v1gnozd-maryland-rifle-build-part-48.html
-
Part 49
https://rumble.com/v1hj283-maryland-rifle-build-part-49.html
-
Part 50
https://rumble.com/v1igelp-maryland-rifle-build-part-50.html
-
Part 51
https://rumble.com/v1jgtz1-maryland-rifle-build-part-51.html
-
Part 52
https://rumble.com/v1kera3-maryland-rifle-build-part-52.html
-
Part 53
https://rumble.com/v1lbfwh-maryland-rifle-build-part-53.html
-
Part 54
https://rumble.com/v1m80uq-maryland-rifle-build-part-54.html
-
Hi Bill,
There seems to be some sort of glitch with part 54. When I click on the link, it takes me to a Rumble page that says “Video Not Found.”
Thanks,
Jay
-
Last one did not work. Lets try this again.
Part 54
https://rumble.com/v1m91ce-maryland-rifle-build-part-54.html
-
Part 55
https://rumble.com/v1n32g2-maryland-rifle-build-part-55.html
-
Part 56
https://rumble.com/v1o2g2y-maryland-rifle-build-part-56.html
-
Part 57
https://rumble.com/v1p6gvx-maryland-rifle-build-part-57.html
-
Part 58
https://rumble.com/v1qffmb-maryland-rifle-build-part-58.html
-
Part 59
https://rumble.com/v1rmto2-maryland-rifle-build-part-59.html
-
Part 60
https://rumble.com/v1ttcmq-maryland-rifle-build-part-60.html
-
Part 61
https://rumble.com/v1vmisy-maryland-rifle-build-part-61.html
-
Part 62
https://rumble.com/v1wtjwg-maryland-rifle-build-part-62.html
-
Part 63
https://rumble.com/v1xbju6-maryland-rifle-build-part-63.html
-
Part 64
https://rumble.com/v1ylbik-maryland-rifle-build-part-64.html
-
Part 65
https://rumble.com/v1zz2zo-maryland-rifle-build-part-65.html
-
Part 66
https://rumble.com/v2137ti-maryland-rifle-build-part-66.html
-
Part 67
https://rumble.com/v2259ym-maryland-rifle-build-part-67.html
-
Part 68
https://rumble.com/v23946u-maryland-rifle-build-part-68.html
-
This is so helpful Bill. Thanks. It will be interesting to watch how the door latching mechanism is done.
-
Part 69
https://rumble.com/v249su2-maryland-rifle-build-part-69.html
-
Part 70
https://rumble.com/v25fhjt-maryland-rifle-build-part-70.html
-
Part 71
https://rumble.com/v26iol8-maryland-rifle-build-part-71.html
-
Part 72
https://rumble.com/v27gmbq-maryland-rifle-build-part-72.html
-
Part 73
https://rumble.com/v28allw-maryland-rifle-build-part-73.html
-
Part 74
https://rumble.com/v293m5i-maryland-rifle-build-part-74.html
-
Hi Bill,
Is the punch you use to move metal in your latest video something you made, or is it something that can be purchased? I’ve not seen one with a rectangular shaped end before.
Thanks,
Jay
-
Make it from a hardened steel rod and a grinding wheel.
-
Part 75
https://rumble.com/v29yyh8-maryland-rifle-build-part-75.html
-
Part 76
https://rumble.com/v2av9rg-maryland-rifle-build-part-76.html
-
Part 77
https://rumble.com/v2bodcc-maryland-rifle-build-part-77.html
-
Part 78
https://rumble.com/v2cmawc-maryland-rifle-build-part-78.html
-
Part 79
https://rumble.com/v2do3fs-maryland-rifle-build-part-79.html
-
Hi Bill,
Watching part 79. Possible a stupid question, but how do you hold onto that rear sight when filing and polishing and getting rid of the casting gate? Trying to file the gate off while holding it by hand is doable, but it can be a pain. And the shape of the part makes me worried that a vise might hurt the shape of the dovetail.
Thanks,
Jay
-
I think I held that with pliers against the bench pin. That is that piece of wood sticking out of the front of the workbench with a notch cut in it. I do that for filing most of the parts. I hardly ever use the vise for filing.
-
Part 80
https://rumble.com/v2ep2ga-maryland-rifle-build-part-80.html
-
Part 81
https://rumble.com/v2fqk0w-maryland-rifle-build-part-81.html
-
Part 82
https://rumble.com/v2gy4am-maryland-rifle-build-part-82.html
-
Hi Bill,
Watching part 79. Possible a stupid question, but how do you hold onto that rear sight when filing and polishing and getting rid of the casting gate? Trying to file the gate off while holding it by hand is doable, but it can be a pain. And the shape of the part makes me worried that a vise might hurt the shape of the dovetail.
Thanks,
Jay
Here’s one way to hold sights. Works for front or rear.
(https://i.ibb.co/WfkHrqR/B9873-D71-6-E4-B-4-B38-9-DC0-C7-C96-B4-B79-D2.jpg) (https://ibb.co/3cpTxGP)
(https://i.ibb.co/4sWLVFK/51-D29-B17-7-C2-F-43-EB-B344-ED8-EC29-CC211.jpg) (https://ibb.co/XyXPCWj)
upload images (https://imgbb.com/)
Jeff
-
Part 83
https://rumble.com/v2icr60-maryland-rifle-build-part-83.html
-
Part 84
https://rumble.com/v2jrt4q-maryland-rifle-build-part-84.html
-
Part 85
https://rumble.com/v2l2esq-maryland-rifle-build-part-85.html
-
Part 86
https://rumble.com/v2mbhz8-maryland-rifle-build-part-86.html
-
Part 87
https://rumble.com/v2nkl8k-maryland-rifle-build-part-87.html
-
Part 88
https://rumble.com/v2ovpj6-maryland-rifle-build-part-88.html
-
Part 89
https://rumble.com/v2qafai-maryland-rifle-build-part-89.html
-
Part 90
https://rumble.com/v2rqqe0-maryland-rifle-build-part-90.html
-
Part 91
https://rumble.com/v2t9d1w-maryland-rifle-build-part-91.html
-
Gotta be the hardest gun building videos I've ever tried to watch. The ads and intros are unbearable.
-
The number of people that love it and the number of people that hate it seem to be about equal.
-
Part 92
https://rumble.com/v2uq4ng-maryland-rifle-build-part-92.html
-
Part 93
https://rumble.com/v2w20yw-maryland-rifle-build-part-93.html
-
Part 94
https://rumble.com/v2xj8qy-maryland-rifle-build-part-94.html
-
Part 95 - Engraving
https://rumble.com/v2ys1ii-maryland-rifle-build-part-95.html
-
Part 96
https://rumble.com/v3048ok-maryland-rifle-build-part-96.html
-
Part 97
https://rumble.com/v31ikyw-maryland-rifle-build-part-97.html
-
Part 98
https://rumble.com/v332nhw-maryland-rifle-build-part-98.html
-
Part 99
https://rumble.com/v34t1zu-maryland-rifle-build-part-99.html
-
Part 100
https://rumble.com/v36vd17-maryland-rifle-build-part-100.html
-
Part 101
https://rumble.com/v391kux-maryland-rifle-build-part-101.html
-
Part 102
https://rumble.com/v3btdve-maryland-rifle-build-part-102.html
-
Part 103
https://rumble.com/v3e1ih6-maryland-rifle-build-part-103.html
-
This is the last one
Part 104
https://rumble.com/v3g9h1e-maryland-rifle-build-part-104.html