AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: tippit on January 07, 2022, 06:58:38 PM
-
It's been a while since I posted one of my forged knives. This 8 1/2-inch skinner was forged to near completion from an old rusted/pitted buggy spring. This is how it came out of the quench/temper and all I did was sharpen it plus epoxy it to a stained piece of deer antler...tippit
(https://i.ibb.co/Xj7hm8J/Rustic-Skinner-6.jpg) (https://ibb.co/sbK0LH3)
(https://i.ibb.co/LJVQxkQ/Rustic-Skinner-7.jpg) (https://ibb.co/61jvHnv)
(https://i.ibb.co/sWQVx9K/Rustic-Skinner-8.jpg) (https://ibb.co/Z2KM4zB)
-
Nice work Tippit
-
Looking real good!! :D --JB