AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: hawkeye on February 26, 2022, 06:07:05 PM
-
Started a while back to work on this project and just finished up
Tried to reflect a Revolution war horn, don't know if the features are all correct but I tried as I said
Measures 13 1/2 inch over the curve and is 2 1/2 inch wide on the back
Give it also a try on scrimshaw it
Your humble
Hawkeye
(https://i.ibb.co/W3wnw2J/IMG-20220226-154909.jpg) (https://ibb.co/thtBtJr)
(https://i.ibb.co/TY0YdDf/IMG-20220226-155109.jpg) (https://ibb.co/wBQBjZk)
(https://i.ibb.co/6mP4brr/IMG-20220226-155117.jpg) (https://ibb.co/805j2NN)
(https://i.ibb.co/02nm2s8/IMG-20220226-155134.jpg) (https://ibb.co/zxmQx6j)
-
Nothing wrong with that, the art work is great.
Tim
-
Good looking horn. I'd hang it off a bag!
-
From here it looks outstanding to me!
-
It's my first scrimshaw horn, built a couple years before this banded horn
(https://i.ibb.co/Vx2hcDZ/P1000516.jpg) (https://ibb.co/ScR1408)
:'(
-
Hawkeye--You do good work. --JB
-
Fine work. You did well!
Mike
-
I've just started making some simple horns myself, and I can only now understand how much craftsmanship such a horn involves. You have my utmost respect.
-
Well done Hawkeye!
-
Looks like a horn the average militia man would carry, great job!
-
Thank you all for the positive feedback