AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: jlutz on May 01, 2022, 07:52:20 PM
-
I had a chance to take a class focusing on Woodbury style knives last weekend with Frank House and Joe Seabolt. It was held at the Blacksmith shop at the Goshen Historical Society in Goshen, OH (http://goshenhistory.org/gths-blacksmith). Definitely worth checking out if you can! I believe they will be offering the same class later this year. The knife I made is below.
(https://i.ibb.co/7GLFHB9/7543-DFAC-E069-41-D0-814-B-86358-A793962.jpg) (https://ibb.co/nDtST4W)
Update: Joe was kind enough to have a few of us over to his shop last weekend to show us how to make a backwoods style sheath to go along with the knife. It has a rawhide liner, stitched with copper wire. That is covered with walnut dyed brain tanned leather, stitched with linen. The whole thing is then treated with a beeswax solution. If it peaks your interest, Joe is willing to offer a class at the Goshen school (near Cincinnati) if he gets enough interest. Look him up or let me know and I’ll pass along his contact info. It was a great class. I’m no leatherworker but have made a few belt sheaths with a welt. This was a whole new undertaking and I learned a lot of great techniques.
(https://i.ibb.co/sWrRFC9/E22-CFC81-5458-48-B4-BDC0-5-FF7-B7-D22-B8-B.jpg) (https://ibb.co/Z2CXhSz)
(https://i.ibb.co/qsQfm9M/EC4-B01-A2-3496-4-AA0-82-F7-15-F62374-F665.jpg) (https://ibb.co/VS4ZMDW)
-
Nice knife you made sir
Thanks for sharing
I met Frank in the early 90's in Friendship
-
Thank you kindly! It was my first time meeting Frank; he was fun to work with and a gracious teacher, as was Joe.
-
Nice looking work, jlutz.
Bob
-
Much appreciated Bob! ~Jake
-
A job well done!
-
Very nice knife indeed!
Well done and congratulations.
Thanks for sharing.
Regards,
Doug
-
WOW, thanks for sharing.
Michael
-
Nice work! Thanks for sharing.
Ken
-
Thanks all for the kind comments, it’s much appreciated!
-
Well done! You learned from 2 of best for sure.
-
Something to be proud of nice work!
-
Very nice….would love to take a class
-
Very nice….would love to take a class
Thank you! Keep an eye on the website I posted above. They are adding more and more classes!
-
nice work. What steel did you use for the blade ?
-
nice work. What steel did you use for the blade ?
Thanks! I used 1084 for this one.