AmericanLongRifles Forums
General discussion => Contemporary Accoutrements => Topic started by: tallbear on June 17, 2022, 09:15:21 PM
-
Finished up this silver cup this morning......it should be on my table at the Ft Loudoun Market fair next weekend.Stop by and say hi!!!!
Mitch
(https://i.ibb.co/bFdK0r4/DSC-0708.jpg) (https://ibb.co/w76zkKn)
(https://i.ibb.co/TrxPNKX/DSC-0711.jpg) (https://ibb.co/nRNQK32)
(https://i.ibb.co/wpKmsk7/DSC-0706.jpg) (https://ibb.co/TPH3Lf1)
(https://i.ibb.co/99pQQH4/DSC-0712.jpg) (https://ibb.co/DD100fM)
-
Great job Mitch!
-
Great job Mitch!
Thanks bud....I feel the need to go downtown and visit my friend Basil..................test it out......
Mitch
-
WOW!
Tim
-
That certainly is fine! Is that the same size as the one I have? I may need another...hmmmm, I may have a problem. Oh, that is for a gentleman, No problem.
-
Very nicely done! I'm wondering about how big it is how much it holds etc?
-
Wow, that is wild! Blown away. Very nice.
-
Ed
It's the same size :)
Dan it's roughly shot glass size here is a photo with a quarter for scale
(https://i.ibb.co/nDGk4rH/DSC-0717.jpg) (https://ibb.co/br0dY1S)
-
The size makes it even more impressive.
Tim
-
Mitch,
Beautiful work !!! Both the silver work and the engraving are superb.
Do you roll the upper lip ? Or is it a separate piece silver soldered in place ?
-
Amazing craftsmanship is done here
Wow
-
Do you roll the upper lip ? Or is it a separate piece silver soldered in place ?
Thanks Dave
On these I make the lip(top and bottom and handle) from drawn wire from ingots cast in shop.I've done rolled edges but they take a lot more time which raises the cup cost .
Mitch
-
Thanks Mitch. I can certainly understand why the rolled lip takes so much longer to do....and the wire lip looks great.
-
Fascinating work, Mitch.
-
I so much enjoy your engraved chevron border. :-)
-
Beautiful work.
Ken
-
Beautiful work as always Mitch!
-
I got to handle this at Ft Loudon, looks even better in person! Shame I'm not a gentleman... ;D
-
Great looking cup Mitch
-
Fantastic peice Mr. Mitch. Good to see you this weekend.
-
(https://i.ibb.co/tL7pBm4/483-B3-EB8-C040-427-F-B744-08084-B05-C0-DA.jpg) (https://ibb.co/wc9hy0R)
Hey Mitch,
Maybe you can put a little bit of this in that cute little cup here in a couple of weeks!
-
Ed
It's the same size :)
Dan it's roughly shot glass size here is a photo with a quarter for scale
(https://i.ibb.co/nDGk4rH/DSC-0717.jpg) (https://ibb.co/br0dY1S)
Nice work Mitch, Doc Holiday needed that twirl in the Tombstone movie :)
Dennis
-
Thanks everyone for the kind words about my cup,they are appreciated. I have 2 more on the bench and will post them when done.
Hey Mitch,
Maybe you can put a little bit of this in that cute little cup here in a couple of weeks!
Stoner
Looking forward too it!!!! It's only proper that I test the cup out( strictly in the name of quality assurance 8) 8) ) before it gets shipped to the new owner after the CLA.
Mitch