AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Bill Raby on June 27, 2022, 08:21:37 AM
-
Here is a series of gun building videos that You Tube deleted. I finally have the files again and I am posting them on Rumble. This is the first set of videos that I did. I still had a beard back then! Got a job where I have to wear a hazmat suit and gas mask now so the beard had to go. It is at the old house with the small shop, bad lighting, and not nearly as many fancy tools as I have now. Sadly the little dog at the start of some of the videos is not around any more.
If you are thinking of building a kit for the first time this will give you a pretty good idea of what you are getting yourself into.
Part 1
https://rumble.com/v1a3ls7-fusil-de-chasse-build-part-1.html
-
Part 2
https://rumble.com/v1a3vo1-fusil-de-chasse-build-part-2.html
-
I ain't watching it unless there's fancy tools involved.
-
Can't wait Bill, thanks for re uploading.
-
Thank you for posting, I’m going to try my hand at building a gun when I can afford it. Keen to see what I’ll be in for watching this video.
-
I am usually on the road for work for most of the week. I will get a few more posted on the weekend. It takes a few hours to upload each of these so it might take a little while.
-
Thank you for posting, I’m going to try my hand at building a gun when I can afford it. Keen to see what I’ll be in for watching this video.
I find that building a gun is cheaper than driving. ;D
David
-
I'm still waiting to see the hot chick with all the tattoos he is always talking about.
-
She don't want to be in any videos. Sorry.
-
Part 3
https://rumble.com/v1ankor-fusil-de-chasse-build-part-3.html
-
Part 4
https://rumble.com/v1as0zi-fusil-de-chasse-build-part-4.html
-
Part 5
https://rumble.com/v1awkky-fusil-de-chasse-build-part-5.html
-
Part 6
https://rumble.com/v1b0rg5-fusil-de-chasse-build-part-6.html
-
Do you remember who you got this kit from?
-
Do you remember who you got this kit from?
Track of the Wolf
-
Part 7
https://rumble.com/v1b4515-fusil-de-chasse-build-part-7.html
-
Part 8
https://rumble.com/v1bns7f-fusil-de-chasse-build-part-8.html
-
Part 9
https://rumble.com/v1boskl-fusil-de-chasse-build-part-9.html
-
Part 10
https://rumble.com/v1bsatx-fusil-de-chasse-build-part-10.html
-
Part 11
https://rumble.com/v1ciq5f-fusil-de-chasse-build-part-11.html
-
Part 12
https://rumble.com/v1ck3p1-fusil-de-chasse-build-part-12.html
-
Part 13
https://rumble.com/v1ckvet-fusil-de-chasse-build-part-13.html
-
Part 14
https://rumble.com/v1dddyb-fusil-de-chasse-build-part-14.html
-
Part 15
https://rumble.com/v1deuo3-fusil-de-chasse-build-part-15.html
-
Part 16
https://rumble.com/v1dhs0n-fusil-de-chasse-build-part-16.html
-
Part 17
https://rumble.com/v1djzex-fusil-de-chasse-build-part-17.html
-
Part 18
https://rumble.com/v1e05s9-fusil-de-chasse-build-part-18.html
-
Part 19
https://rumble.com/v1e6tyn-fusil-de-chasse-build-part-19.html
-
If your going to use that round file You could take it and break the tip off, heat it up and bend a slight curve in the end to reach into those tight areas. :-\
-
Part 20
https://rumble.com/v1e8pln-fusil-de-chasse-build-part-20.html
-
Part 21
https://rumble.com/v1ebbpx-fusil-de-chasse-build-part-21.html
-
Part 22
https://rumble.com/v1f254d-fusil-de-chasse-build-part-22.html
-
Part 23. This is the last one. I hope that you enjoyed these.
https://rumble.com/v1f5o9n-fusil-de-chasse-build-part-23.html