AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: Tim Crosby on July 02, 2022, 04:50:45 PM

Title: Horn With Single Band
Post by: Tim Crosby on July 02, 2022, 04:50:45 PM

 It is about 12 3/4" around the outside curve and 11 tip-to-tip. The butt is Maple threaded 1/2-8 for the Hickory finial. It is held in by 4 wooden pegs. The tip is made up of two pieces of antler pinned together with 3 wooden pegs and to the horn with 3 move. The turned band was boiled and pressed on, it is secured with 3 Iron pins.

  Tim C.,


(https://i.ibb.co/Pjnr2Nj/IMG-1108-2.jpg) (https://ibb.co/dMqfNrM)

(https://i.ibb.co/grsXJ0B/IMG-1109-2.jpg) (https://ibb.co/dfn3DNz)

(https://i.ibb.co/fvFPdkc/IMG-1110-2.jpg) (https://ibb.co/nCm5M7W)

(https://i.ibb.co/9nkgSH4/IMG-1111-2.jpg) (https://ibb.co/K6phSxs)

(https://i.ibb.co/ChVMxRc/IMG-1112-3.jpg) (https://ibb.co/zGP7KqM)

Title: Re: Horn With Single Band
Post by: jbigley on July 02, 2022, 04:58:11 PM

Nice looking horn, Tim. Threaded finial is a pretty nice touch. --JB