AmericanLongRifles Forums

General discussion => Contemporary Accoutrements => Topic started by: Tim Crosby on October 25, 2022, 04:53:13 PM

Title: Lobbed Horn
Post by: Tim Crosby on October 25, 2022, 04:53:13 PM

  It is 13" around the outside curve and 10 1/2" tip-to-tip. the plug is Pine held in by 9 wooden pegs, 3 groups of 2 and 1 of 3, it is 3" in diameter. The extension is held in by 10 wooden pegs. The neck was stained and the body finished with AF followed by Brown shoe polish on all.

  Tim C.


(https://i.ibb.co/ryv9Nwk/IMG-1352-2.jpg) (https://ibb.co/6sNQLWY)

(https://i.ibb.co/rZkRMVC/IMG-1353-2.jpg) (https://ibb.co/8jML2HW)

(https://i.ibb.co/0YnzXYF/IMG-1354-2.jpg) (https://ibb.co/MPgJhPG)

(https://i.ibb.co/TcpLLg6/IMG-1356-2.jpg) (https://ibb.co/p2GyyLc)

Title: Re: Lobbed Horn
Post by: MeliusCreekTrapper on October 25, 2022, 05:29:39 PM

Very nice horn. The lobed extension is certainly eye catching. Nice coloration also.

Title: Re: Lobbed Horn
Post by: hanshi on October 25, 2022, 07:21:49 PM

Good looking horn and clever design; excellent craftsmanship.

Title: Re: Lobbed Horn
Post by: bigsmoke on October 28, 2022, 11:34:00 PM

Interesting concept of mating two horns together to get a lobed base.
I like it!!
John (Bigsmoke)

Title: Re: Lobbed Horn
Post by: Tim Crosby on October 29, 2022, 03:44:30 PM

 I was trying to get another inch or so on the horn. Might be looked at as a horn that had the lobe broken or cracked and this is a replacement.

   Tim