AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: Mule Brain on June 04, 2023, 11:50:47 PM
-
Grabbed this up at local gun show, missing lock and side plate. Any idea what lock it would have had??
Thanks
(https://i.ibb.co/mc8QGkw/IMG-E4996.jpg) (https://ibb.co/TgLzk6S)
(https://i.ibb.co/Tcjrqnx/IMG-E4997.jpg) (https://ibb.co/XX0Vkdr)
-
Probably that old lock DGW sold many years ago.
-
Probably that old lock DGW sold many years ago.
I was looking at one of their old catalogs earlier. It looks like lock number LP0901
-
Hey bro! Good luck findin one for it.
Where you find a gunshow in your area?
Have a goodun, Dave F 8) 8)
-
not much help as to what that lock should be, but i just had to comment on the circle sawn wood behind the gun.
raised by a mill wright and love the kerf marks and finish.
you may have to get the builders lock kit and fit the plate to that inlet. not much wood to fit a lock by opening the inlet. great looking pistol though.
-
Hey bro! Good luck findin one for it.
Where you find a gunshow in your area?
Have a goodun, Dave F 8) 8)
Dave,
Ladson South Carolina, M&K Gun shows. I setup a table to advertise our Gun Club
-
I dont think this is corect but its close. This is from the CVA colonial pistol they sell.(https://i.ibb.co/ykxTsvg/th.jpg) (https://imgbb.com/)
There are a few auctions on Ebay for them. Good luck