Author Topic: Great British Gunmakers 1740-1790 -----Question #2  (Read 2986 times)

Offline Larry Pletcher

  • Hero Member
  • *****
  • Posts: 1748
    • Black Powder Mag
Great British Gunmakers 1740-1790 -----Question #2
« on: July 13, 2010, 04:51:43 PM »
In my study of Great British Gunmakers 1740-1790 by Neal and Back I noticed another unusual item (at least to me).  It is a fine "under and over" carriage pistol made by John Twigg and believed to be restocked by Durs Egg.  The pistol has an external main spring mounted behind the frizzen spring with  the end of the spring fitted into a small cavity on the lower front of the cock.

The following photo shows the spring arrangement:



Great British Gunmakers 1740-1790 (1975) W. Keith Neal and D.H.L Back
Plate 128

Has anyone had a chance to see one of these up close?
Regards,
Pletch
Regards,
Pletch
blackpowdermag@gmail.com

He is no fool who gives up what he cannot keep to gain what can never be taken away.

Kayla Mueller - I didn't come here of my own accord, and I can't leave that way.  Whoever brought me here, will have to take me home.

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7000
Re: Great British Gunmakers 1740-1790 -----Question #2
« Reply #1 on: July 13, 2010, 06:28:19 PM »
Hi Pletch,
I too was always intrigued by that gun.  I would love to handle it.  It is essentially like the Italian romanlocks, which were similar to miquelets.  The spring acts directly on the cock not via a tumbler so it may be very fast.

dave
"The main accomplishment of modern economics is to make astrology look good."

Michael

  • Guest
Re: Great British Gunmakers 1740-1790 -----Question #2
« Reply #2 on: July 14, 2010, 01:37:44 PM »
Wouldn't that lock be fun to make!!!!!!!!

Michael

Offline 490roundball

  • Sr. Member
  • ****
  • Posts: 377
Re: Great British Gunmakers 1740-1790 -----Question #2
« Reply #3 on: July 14, 2010, 06:29:57 PM »
you can see the same spring idea in New York percussion rifles

for example->
http://americanlongrifles.org/forum/index.php?topic=6597.0

I have heard it suggested that this arrangement gives a thinner profile strength due to less inletting -
"It's a poor word that can't be spelt two ways" Tom Yeardley in Swanson's Silent Drum