Author Topic: Barrel length ????  (Read 14320 times)

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Re: Barrel length ????
« Reply #25 on: August 06, 2010, 05:10:38 PM »
Since this is on barrell length, I'm curious,  What is the longest know rifled barrel?  In the future I would like a Swamped .58 52-56 in long.
Then carry X-stix to make the shot :o

northmn

  • Guest
Re: Barrel length ????
« Reply #26 on: August 06, 2010, 05:21:46 PM »
I have read (and this may be a crock) that in trade with the Indians a firelock would placed with its butt on the ground and traded for a stack of beaver skins equal to its height. That would encourage long barrels, at least in trade guns.
We should also consider that much of what passed for design 200 years ago was really copying tradition. Nobody had a chronograph. There were a handful of eprouvettes for testing powder and the odd ballistic pendulum in a royal armory. Most craftsmen were just looking at what their masters had made, who in turn were looking at what their masters had made.
Don't underestimate the possibility of greed multiplied by tradition.

Its a crock.  The NW gun went for 20 beaver skins all through the trade era.  Hansen discussed that myth in his book on Trade Guns.  Like rifles the NWTG had a longer barrel in teh East and a shorter one in the West.  This was the gun the Natives liked to use running buffalo on horseback as it could be loaded without a patch.  They also burst a few barrels doing so.  The Natives probably believed in advantages of longer barrels just like the whites did.

DP

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Barrel length ????
« Reply #27 on: August 07, 2010, 06:10:02 PM »
Later on this month I will begin my scouting of Ft Stewart. I plan to hit it quite hard this and next year. It is and has been for a while ate up with pigs.

Maybe I'll be able to point you towards some hot spots.  ;)


Ahh yes, beautiful Ft. Stewart...I spent several years there many moons ago.


Ez
"Rules are for the obedience of fools and guidance of wise men"

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Barrel length ????
« Reply #28 on: August 07, 2010, 06:12:20 PM »
I am beginning a Gillespie rifle project.  Just got my swamped .42 caliber 50" barrel from Bobby Hoyt.  I love long barrels.  ;D


Ez
"Rules are for the obedience of fools and guidance of wise men"

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Barrel length ????
« Reply #29 on: August 07, 2010, 10:13:38 PM »
If I had a barrel that long the last deer I took would have had to back away so that I could shoot him.......as it was he had powder burns on his side!!  ;) ;D ;D :o
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Barrel length ????
« Reply #30 on: August 08, 2010, 01:07:47 AM »
Ezra--I trust we'll see the product of this project! I love 'em long barrels too.  :o
"Anything worth doing is worth doing slowly." Mae West

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Barrel length ????
« Reply #31 on: August 08, 2010, 05:46:10 AM »
Ezra--I trust we'll see the product of this project! I love 'em long barrels too.  :o

Indeed you shall.  I may even post pictures of the parts (including said barrel) tomorrow.


Ez
"Rules are for the obedience of fools and guidance of wise men"