« previous next »
Pages: [1]   Go Down

Author Topic: beck fowler part  (Read 4465 times)

ERH

  • Guest
beck fowler part
« on: August 01, 2010, 03:12:45 AM »
looking for anyone who sells beck Fowler butt plate and trigger guard
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: beck fowler part
« Reply #1 on: August 01, 2010, 04:06:39 AM »
Probably Reeves Goehring. he'll have something close anyway.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline smshea

  • Hero Member
  • *****
  • Posts: 592
    • www.scottshearifles.com
Re: beck fowler part
« Reply #2 on: August 01, 2010, 04:37:08 AM »
Eric

  I can try to call Richie Hujsa and see what he uses, my guess is it is something from Reeves. Richie has a pattern and an original and has built one or two.
Logged

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1690
Re: beck fowler part
« Reply #3 on: August 01, 2010, 07:07:22 AM »
Reaves Gorering for the but plate, that is one you can "kit bash". The guard you will either need to fabricate or make up from two guards. The front finial is the problem. BJH
Logged
BJH

ERH

  • Guest
Re: beck fowler part
« Reply #4 on: August 01, 2010, 02:03:59 PM »
reeves don't have one i allready talk to him about it . I was hoping to get a little closer to it then what he has .It would take  a ton of customising
Logged

Leatherbelly

  • Guest
Re: beck fowler part
« Reply #5 on: August 01, 2010, 05:52:21 PM »
Try Dave Keck.
Logged

ERH

  • Guest
Re: beck fowler part
« Reply #6 on: August 01, 2010, 06:17:59 PM »
do you know how to get a hold of him?
Logged

ERH

  • Guest
Re: beck fowler part
« Reply #7 on: August 01, 2010, 06:21:09 PM »
Scott if you can do that i would appreciate it very much.
Logged

Offline Bill of the 45th

  • Hero Member
  • *****
  • Posts: 1436
  • Gaylord, Michigan
Re: beck fowler part
« Reply #8 on: August 01, 2010, 09:15:27 PM »
Dave Keck, Knob Mountain Muzzleloading.com Phone 570-759-2053  Fantastic guy to deal with.  Some of the best castings on the market.

Bill
Logged
Bill Knapp
Over the Hill, What Hill, and when did I go over it?

Offline smshea

  • Hero Member
  • *****
  • Posts: 592
    • www.scottshearifles.com
Re: beck fowler part
« Reply #9 on: August 02, 2010, 03:16:10 PM »
Quote from: Bill Knapp on August 01, 2010, 09:15:27 PM
Dave Keck, Knob Mountain Muzzleloading.com Phone 570-759-2053  Fantastic guy to deal with.  Some of the best castings on the market.

Bill

I'll second that!
Logged
Pages: [1]   Go Up
« previous next »