« previous next »
Pages: [1]   Go Down

Author Topic: Reading Patchbox Release  (Read 2590 times)

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1285
  • Great X Grandpa
Reading Patchbox Release
« on: January 23, 2011, 06:42:58 PM »
I'm building a long gun based on a Reading piece (one of the so called Haga's) but don't know how to do the patch box release. All the patch box releases I've done (which is not many!) have come down from the heel extention. This one releases from the back of the butplate by the patch box. Can anyone illuminate  for me how this type works? Pictures would be much appreciated.

Thanks!
Logged
Robert Wolfe
Northern Indiana

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1627
  • In Costume
Re: Reading Patchbox Release
« Reply #1 on: January 23, 2011, 07:14:46 PM »
Bob,  Go back to page 3 and look at the Figthorn release mechanism thread-----same deal-good photos there.
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline Dave B

  • Hero Member
  • *****
  • Posts: 3133
Re: Reading Patchbox Release
« Reply #2 on: January 23, 2011, 07:24:01 PM »
The four examples of rifles attributed I have seen have had the release in the heel of the butt plate.  So you would not be out of place using what you have done up to now. but for what you are looking for go to  http://americanlongrifles.org/forum/index.php?topic=14068.msg132571#msg132571
Logged
Dave Blaisdell

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1285
  • Great X Grandpa
Re: Reading Patchbox Release
« Reply #3 on: January 23, 2011, 07:38:02 PM »
Thanks for reminding me of the Figthorn thread - that's just what I needed!
Logged
Robert Wolfe
Northern Indiana
Pages: [1]   Go Up
« previous next »