« previous next »
Pages: [1]   Go Down

Author Topic: Horn W/Four bands & Pewter Tip  (Read 2952 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Horn W/Four bands & Pewter Tip
« on: December 03, 2010, 07:12:48 PM »
 
 It is about 13" around the outside curve. The base is Walnut and about 2”s, it is hollowed out and held in place with 4 steel pins. The tip was poured than turned and is held on with three steel pins. The four bands were heated and pressed on but have two steel pins each to make sure they stay put. The body has AF on it and the bands a mixture of leftover dyes. It now has a stopper.

 Tim C.
 



Logged

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Horn W/Four bands & Pewter Tip
« Reply #1 on: December 03, 2010, 08:43:23 PM »
Tim
You just keep coming up with new stuff. Great job. I have found that to me, pewter tips are heavy.  I did a buff horn with pewter bands and a horn screw tip. It was better but still kind of heavy.
Also, Happy Birthday

Steve
Logged
Steve Skillman

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Horn W/Four bands & Pewter Tip
« Reply #2 on: December 03, 2010, 10:57:52 PM »
Great looking horn Tim and like the use of the pewter tip.  And Happy Birthday.
gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

eseabee1

  • Guest
Re: Horn W/Four bands & Pewter Tip
« Reply #3 on: December 04, 2010, 03:48:33 AM »
really like it Tim some day may have to try pewter myself ..And HAPPY BIRTHDAY
Logged

smorrison

  • Guest
Re: Horn W/Four bands & Pewter Tip
« Reply #4 on: December 04, 2010, 03:50:21 AM »
Nice looking horn Tim, and my birthday wishes also to you!

Scott
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: Horn W/Four bands & Pewter Tip
« Reply #5 on: December 04, 2010, 09:49:30 PM »
 Thanks guys.

 Tim C.
Logged
Pages: [1]   Go Up
« previous next »