« previous next »
Pages: [1]   Go Down

Author Topic: When to burnish  (Read 3314 times)

Offline marcusb

  • Full Member
  • ***
  • Posts: 106
When to burnish
« on: December 23, 2010, 08:39:09 PM »
I am in the process of refinishing a flintlock stock that was coated very heavy with some type of poly sudstance that resisted everything. I am scraping the stock down and staing with my home brew vinegar stain thats almost ready. I was curious when and if I should burnish the wood. I was unsure is I do it before if the stain would penetrate properly.
After I stain i need to apply a finnish. This is my deer rifle and will be used in all weather,
« Last Edit: December 23, 2010, 08:46:29 PM by marcusb »
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19534
Re: When to burnish
« Reply #1 on: December 23, 2010, 10:24:16 PM »
If you burnish before staining, the stain won't penetrate right.  Some burnish after a sealing coat.
Logged
Andover, Vermont

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7017
Re: When to burnish
« Reply #2 on: December 23, 2010, 11:21:04 PM »
Hi Marcus,
You do not need to burnish a stock at all.  If you want to do that then wait until after staining and the first coat of finish. 

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: When to burnish
« Reply #3 on: December 27, 2010, 12:42:17 AM »
What dave said.  I like to seal with Shellac, bring it back to bare wood and then burnish beforemapplying oil varnish. sure eliminates any whisker issues!!
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: When to burnish
« Reply #4 on: December 27, 2010, 01:20:00 AM »
Yep, I third that.

first Stain.  then Seal with shellac. then Burnish.

finally, finish.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.
Pages: [1]   Go Up
« previous next »