« previous next »
Pages: [1]   Go Down

Author Topic: Small Wrench  (Read 3643 times)

Offline okieboy

  • Hero Member
  • *****
  • Posts: 820
Small Wrench
« on: January 10, 2011, 04:48:39 AM »
 I am not posting this as any great achievement of art or craft, it is neither; but it was a fun and useful little project a bit different from most of the items in this area of the forums. Part of the idea was to make a powder drum wrench that was so small that you couldn't overtorque the drum. And as long as you are making a drum wrench, why not add a slot for the nipple flats? This is O1 material and has been hardened.
Logged
Okieboy

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7472
  • Born in Kentucke, just 250 years late
Re: Small Wrench
« Reply #1 on: January 10, 2011, 06:22:02 AM »
Very nice, O.B., I like it.   How thick is it?  Maybe machine a small area in the middle of one of the sides to fit the clean-out screw, then it's 3 tools in one.

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline okieboy

  • Hero Member
  • *****
  • Posts: 820
Re: Small Wrench
« Reply #2 on: January 10, 2011, 06:53:20 AM »
  It is /8" thick.
 Add a screwdiver to one side! I like the way you think Ron. If wide enough it could remove the lock bolt also.
Logged
Okieboy

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3002
Re: Small Wrench
« Reply #3 on: January 10, 2011, 07:22:25 AM »
okie,
Just file down one end for a screw driver blade. Leaves it nice and compact.
Mark
Logged
Mark

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18362
  • AKA TimBuckII
Re: Small Wrench
« Reply #4 on: January 10, 2011, 04:13:39 PM »
 Good idea, almost looks like a miniature breach plug wrench.

 Tim C.
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7472
  • Born in Kentucke, just 250 years late
Re: Small Wrench
« Reply #5 on: January 10, 2011, 08:02:30 PM »
Quote from: smokinbuck on January 10, 2011, 07:22:25 AM
okie,
Just file down one end for a screw driver blade. Leaves it nice and compact.
Mark

Filing one end might make it weak and prone to break out where it's thin already.  I was thinking in the middle and using it lke a t-handle.

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie
Pages: [1]   Go Up
« previous next »