« previous next »
Pages: [1]   Go Down

Author Topic: Over the Comb Tang Question  (Read 4219 times)

Offline Chris in Washington

  • Jr. Member
  • **
  • Posts: 87
Over the Comb Tang Question
« on: January 06, 2011, 07:56:13 AM »
Gentlemen
I was reading the tutorials getting ready to do a over the comb tang.... I have one quick question that I did not see mentioned.... how thick and how wide is the tang after the second screw? 
Thanks for doing a great job on the tutorial.... going to give it a try on the rifle I'm building now. 

Chris


Logged
Chris Statz

Offline LynnC

  • Hero Member
  • *****
  • Posts: 2092
Re: Over the Comb Tang Question
« Reply #1 on: January 06, 2011, 08:30:15 AM »
Going from memory - from the barrel back 2" top flat width then step down to about 1/4"and tapering to 3/32 or so at the very end, the taper running right thru the screw boss.
As to thickness the whole tang is about 3/16 thick the whole length.  That is thick enough to keep the end of the tang from springing out of the comb.
BTW - extra draft on the front of screw boss as while inletting the boss seems to creep toward the comb nose the deeper its inlet and settles into place.  Take your time and it'll turn out great ;)
Logged
The price of eggs got so darn high, I bought chickens......

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: Over the Comb Tang Question
« Reply #2 on: January 06, 2011, 05:34:14 PM »
Chris,
Glad to hear you are going to do one and the tutorial was of some help.  They are intimidating but the results are well worth the effort. 
Please post some pics and let us know how it turns out. 

Cheers,
Ken

 
Logged
Failure only comes when you stop trying.

Offline Chris in Washington

  • Jr. Member
  • **
  • Posts: 87
Re: Over the Comb Tang Question
« Reply #3 on: January 06, 2011, 05:57:37 PM »
Thanks, that helps out a bunch. 

I read and use the tip in the tutorials frequently... last week I hand cut dovetails and made my own underlugs from brass... they turned out OK... We need one on making a double based front sight... hint ...hint ...

Thanks again
Chris
Logged
Chris Statz

westerner

  • Guest
Re: Over the Comb Tang Question
« Reply #4 on: January 07, 2011, 06:21:36 AM »
Over the comb tang. I looked in the tutorials, did a search and another search. I give up.  Can you provide a link to the tutorial about over the comb tangs? Paleeeeeze? ! >:(

                  Joe.  :)
« Last Edit: January 07, 2011, 06:22:45 AM by westerner »
Logged

Offline Chris in Washington

  • Jr. Member
  • **
  • Posts: 87
Re: Over the Comb Tang Question
« Reply #5 on: January 07, 2011, 06:45:23 AM »
Here are the ones I've been reading...

http://americanlongrifles.org/forum/index.php?topic=4233.0
http://americanlongrifles.org/forum/index.php?topic=8143.0
http://americanlongrifles.org/forum/index.php?topic=11096.0

When you do you search use "over the comb tang"  make sure to use the " "  Lots of good info and some really cool pictures.

Chris
Logged
Chris Statz

westerner

  • Guest
Re: Over the Comb Tang Question
« Reply #6 on: January 07, 2011, 07:27:37 AM »
Thanks Chris!

    Joe.
Logged

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: Over the Comb Tang Question
« Reply #7 on: January 07, 2011, 04:05:24 PM »
Thanks Chris.  I think you pretty well got them all. 

I'll try this weekend to move the main thread to the tutorial section and put a link to the other two in the thread somewhere.

Cheers,
Ken
Logged
Failure only comes when you stop trying.
Pages: [1]   Go Up
« previous next »