« previous next »
Pages: [1]   Go Down

Author Topic: Inletting Stock  (Read 3037 times)

FRJ

  • Guest
Inletting Stock
« on: January 11, 2011, 04:59:55 AM »
I have got together all the parts I need to build a Hawken rifle. Took me 40 years and now I need someone to inlet the stock for me. Can anyone recommend someone to do this chore for me. I do have the prints to make it from. Thanks, Frank
Logged

Offline frogwalking

  • Hero Member
  • *****
  • Posts: 1044
Re: Inletting Stock
« Reply #1 on: January 11, 2011, 05:01:44 AM »
David Keck
Logged
Quality, schedule, price; Pick any two.

billd

  • Guest
Re: Inletting Stock
« Reply #2 on: January 11, 2011, 05:48:10 AM »
Do you mean assembled in the white or just the barrel inlet and rough shaped?

BIll
Logged

FRJ

  • Guest
Re: Inletting Stock
« Reply #3 on: January 11, 2011, 10:18:19 PM »
I will need the barrel and lock inletted and the ramrod hole cut. I will also need tenons installed on the barrel. Thanks for the help, Frank
Logged

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Inletting Stock
« Reply #4 on: January 12, 2011, 01:28:27 AM »
Dave would be a good place to start.  Not sure where you're located, theirs others that do great work as well...

Look in the archive's for barrel tenons, bet you could do those yourself.  I know it seems a little scary if you've never done them, but it's not difficult.  Guys here will be able to help...

                   Ed
Logged
Ed Wenger
Pages: [1]   Go Up
« previous next »