« previous next »
Pages: [1]   Go Down

Author Topic: Barrel profile...28gauge x 42"  (Read 5347 times)

Leatherbelly

  • Guest
Barrel profile...28gauge x 42"
« on: January 15, 2011, 11:58:11 PM »
  Gents,have wanted a 28 for some time so here goes.
   I have an old Track pre carve Fusil stock that has a narrow barrel channel and would like to find a slimmer profile barrel then the regular 20gauge in 28ga. The channel is a frogs hair or two under an inch at the breach and just under/over .75 at the muzzle.(I need to remeasure,it's at Taylors)
 Does anyone make a slimmer profiled barrel and plug that will work for this project? (my first)
  The lock and furniture is still made by TOTW and will be ordering it when I find a suitable barrel.
  It won't be fancy,'cause my dog chewed the corner off the toe on the buttstock ! ...the little bas....! Fix that when the time comes,I guess. Just want to make a good usable 28ga. French Tradegun replica.Thanks in advance for any input.
Logged

roundball

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #1 on: January 16, 2011, 01:13:38 AM »
Don't know if they'll have what you're looking for but you can check Rice's barrel chart.....scroll around this page and you should find the dimensions and a configuration sketch for each barrel listed:

http://www.ricebarrels.com/chart.html

I  bought their Golden Age 42" B-weigh x .54cal(.28ga) smoothbore barrel for a Virginia...
« Last Edit: January 16, 2011, 01:15:18 AM by roundball »
Logged

Leatherbelly

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #2 on: January 16, 2011, 03:15:17 AM »
I think you are referring to smooth rifle barrels. Not sure if Rice make a tradegun/fowler barrel.If they do, I'd be interested!  :)
Logged

roundball

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #3 on: January 16, 2011, 03:28:05 AM »
Looked right over that nugget...is it anything that North Star West or Caywood might carry?
Logged

Leatherbelly

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #4 on: January 16, 2011, 10:54:31 PM »
Don't know about Caywood, but NSW's barrels are the same profile as a .62.
Logged

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Barrel profile...28gauge x 42"
« Reply #5 on: January 17, 2011, 12:05:25 AM »
Check out Long Hammock....352.748.7373 Talk with Riley .... They make some nice fowler barrels for Chambers.. I have a 46" 20 ga from them slender OTR tapered and flared....
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Leatherbelly

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #6 on: January 17, 2011, 07:03:58 AM »
Dr.Boone,
I'd really like a lighter profile for the 28.Maybe M&G,dunno.
Logged

Offline LynnC

  • Hero Member
  • *****
  • Posts: 2092
Re: Barrel profile...28gauge x 42"
« Reply #7 on: January 17, 2011, 09:29:13 AM »
LB - What if.....

You bought that 28 bore trade gun bbl from Track and bribe Taylor to turn it down to the approx dimensions of your stock.  To tell the truth, I've been wanting to order one to lighten up myself.....Lynn
Logged
The price of eggs got so darn high, I bought chickens......

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1687
Re: Barrel profile...28gauge x 42"
« Reply #8 on: January 17, 2011, 12:58:36 PM »
L.B Your barrel channel sounds like nearly a drop in fit for one of Larry Zornes Mould and Gun Shop barrels. Call him and get his measurements and compare with yout stocks barrel channel. He does have 28 ga barrels and I know they build into a reasonable weight gun.
Logged
BJH

Michael

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #9 on: January 17, 2011, 04:39:15 PM »
Check with Ed Rayl. His copy of the Bumford Trade Gun barrel might fit.
Logged

mattdog

  • Guest
Re: Barrel profile...28gauge x 42"
« Reply #10 on: January 17, 2011, 05:15:17 PM »
Speaking of the NSW barrel:

Our 28 gage is 1.080" at the breech (about 1 1/16"after draw filing) so would fit there.  They are .700" at the muzzle so might have a gap in your pre-carve if it is 3/4" channel as you describe.  Your precarved barrel channel will restrict just how light of a barrel you can fit in your gun.  It sounds like your stock was cut to fit the typical 20 gage smoothbore barrels available these days that are .750" at the muzzle.

Matt
NSW, Inc.
Logged
Pages: [1]   Go Up
« previous next »