« previous next »
Pages: [1]   Go Down

Author Topic: Metal Stamping Tools  (Read 7376 times)

Harris

  • Guest
Metal Stamping Tools
« on: March 19, 2011, 09:04:43 PM »
Hey fellers does anyone know where you can buy a set of metal stamping tools so you could stamp your name and number of rifle you are building ? Since im not good at engraving i have been having that done its kinda costly and i can see why i thought at one time brownells carried metal stamping tools i have there new catalog but didnt see any in it if anyone here knows of a source i would really appericate it. Another quick question i feel kinda dumb asking this were would a person go to on this site if he wanted to add a picture of a rifle hes building or has built so other members can see it ?  Thank you all and for your time
                                                                                                       
                                                                                                          Harris.
Logged

Offline grabenkater

  • Sr. Member
  • ****
  • Posts: 414
Re: Metal Stamping Tools
« Reply #1 on: March 19, 2011, 09:16:43 PM »
Harbor Freight carries two sizes. I have used the set I have many times and the work very well for something that costs less than $10.
Logged
When a nation forgets her skill in war, when her religion becomes a mockery, when the whole nation becomes a nation of money-grabbers, then the wild tribes, the barbarians drive in... Who will our invaders be? From whence will they come?

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Metal Stamping Tools
« Reply #2 on: March 19, 2011, 09:25:35 PM »
I ordered my name stamp from Brownell's.  That way the spacing was nice.  It is really hard to individually stamp letters to form a name and get them evenly spaced and straight.
DMR
Logged

Offline Paddlefoot

  • Hero Member
  • *****
  • Posts: 1844
Re: Metal Stamping Tools
« Reply #3 on: March 19, 2011, 11:32:02 PM »
Google SHARS Tools. Good quality stuff (even if most is made in China) and you can pick from several sizes and with a holder to make them look nice and get it done at one shot. About $135.
Logged
The nation that makes great distinction between it's warriors and it's scholars will have it's thinking done by cowards and it's fighting done by fools. King Leonidas of Sparta

Offline Acer Saccharum

  • Administrator
  • Hero Member
  • *
  • Posts: 19311
    • Thomas A Curran
Re: Metal Stamping Tools
« Reply #4 on: March 19, 2011, 11:54:55 PM »
I have to agree with Rase(again) that a name stamp is the way to go. Individual letter stamps never look evenly spaced nor line up vertically.

Another source is Sparks Steel Stamps. And I think you can go thru Chris Atland to get a stamp made for you.

The bigger the stamp, the harder you need to hit it. You may need several strikes to get a good impression.

Tom
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Metal Stamping Tools
« Reply #5 on: March 20, 2011, 12:14:57 AM »
Quote from: Acer on March 19, 2011, 11:54:55 PM
I have to agree with Rase(again)
Tom
Now that wasn't so hard, was it Tom? 
DMR
Logged

Offline Paddlefoot

  • Hero Member
  • *****
  • Posts: 1844
Re: Metal Stamping Tools
« Reply #6 on: March 20, 2011, 12:16:31 AM »
You are still going to need the others if you want to do the numbers though.
Logged
The nation that makes great distinction between it's warriors and it's scholars will have it's thinking done by cowards and it's fighting done by fools. King Leonidas of Sparta

Offline davec2

  • Hero Member
  • *****
  • Posts: 2941
    • The Lucky Bag
Re: Metal Stamping Tools
« Reply #7 on: March 20, 2011, 02:45:26 AM »
I have had good luck with these guys:

http://microstamp.us/index.php?main_page=product_info&cPath=23&products_id=85

Here is an impression made by a stamp they made for me.  This is a large one.  I have others one third this size.


« Last Edit: February 21, 2020, 11:40:26 AM by davec2 »
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Trkdriver99

  • Guest
Re: Metal Stamping Tools
« Reply #8 on: March 20, 2011, 02:50:16 AM »
 "You may need several strikes to get a good impression. "

I agree with Acer, my fourth wife was like that, big and hard headed. ;) You had to swat her several times to make a good impression. :o

Ronnie
Logged

Offline Nate McKenzie

  • Hero Member
  • *****
  • Posts: 1019
  • Luzerne Co. PA
    • Nathan McKenzie Gunmaker
Re: Metal Stamping Tools
« Reply #9 on: March 20, 2011, 06:13:24 AM »
I've been satisfied with these guys.     http://www.steelhandstamps.com/index.html
Logged

Offline Jerry V Lape

  • Hero Member
  • *****
  • Posts: 3028
Re: Metal Stamping Tools
« Reply #10 on: March 20, 2011, 07:00:30 AM »
Ronnie, so is wife number 5 or 6 and better?   ;D
Logged

Trkdriver99

  • Guest
Re: Metal Stamping Tools
« Reply #11 on: March 21, 2011, 02:43:50 PM »
 :) Actually I have #1 and have had her for fourty years. Would not trade her for anything. Love of my life.

Ronnie
Logged

Online Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19475
    • GillespieRifles
Re: Metal Stamping Tools
« Reply #12 on: March 21, 2011, 04:24:30 PM »
Quote
I have had good luck with these guys:

http://microstamp.us/index.php?main_page=product_info&cPath=23&products_id=85

Here is an impression made by a stamp they made for me.  This is a large one.  I have others one third this size.
Acer, How did you get that impression so well done? Hammer or a press? Even with multi strikes with a heavy hammer I can not get my 4 character stamp to look that good!
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Acer Saccharum

  • Administrator
  • Hero Member
  • *
  • Posts: 19311
    • Thomas A Curran
Re: Metal Stamping Tools
« Reply #13 on: March 21, 2011, 10:55:06 PM »
To get a good stamping like that, I have Dave Crisalli do it for me. ;D


I think there may be some confusion about who is impressing who, Dennis, but I'll bet Davec2 did that with a press, not by hammer.


I have used a combination press and hammer technique to make a favorable impression.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline davec2

  • Hero Member
  • *****
  • Posts: 2941
    • The Lucky Bag
Re: Metal Stamping Tools
« Reply #14 on: March 21, 2011, 11:29:52 PM »
Dennis,

This particular impression was made with a press.  (See this link   http://americanlongrifles.org/forum/index.php?topic=1138.0  )  I also do it with a hammer, and have good luck, but use a different technique for different situations.  For example, in jewelry work, I use multiple small taps while carefully rocking the stamp tool so that I don't get superimposed images.  For heavier work on steel, I often use one heavy blow with a heavy hammer if the strike won't damage whatever I am marking.  Two suggestions:  1) use a lead block (at least 5 lbs) as an anvil for most hammer marking and, 2) practice, practice, practice on something similar to what you want to make ( same material, same thickness, same surface contour, etc.) until you are confident your technique will work.


Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780
Pages: [1]   Go Up
« previous next »