« previous next »
Pages: [1]   Go Down

Author Topic: incised craving  (Read 6164 times)

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
incised craving
« on: April 19, 2011, 09:31:14 PM »
 is there any nice examples of incised craving out there?
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: incised craving
« Reply #1 on: April 19, 2011, 09:39:35 PM »
Don't know how "nice" mine is...





 ;)
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline Collector

  • Hero Member
  • *****
  • Posts: 993
Re: incised craving
« Reply #2 on: April 19, 2011, 10:36:45 PM »
Just have to ask you Chris, is any of that carving raised (behind the cheek piece) or is it all incised?  I really like what you've accomplished with that incised carving.  Also, it looks like you've been really working on those 'varnish' finishes and with considerable success, it appears.
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: incised craving
« Reply #3 on: April 19, 2011, 11:02:12 PM »
Some elements are slightly raised, but not much.

The varnish....  A LOT of work and trouble in the varnish....and it's still not really "perfected" by any means yet. 
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

westerner

  • Guest
Re: incised craving
« Reply #4 on: April 19, 2011, 11:20:48 PM »
Quote from: Stophel on April 19, 2011, 11:02:12 PM
Some elements are slightly raised, but not much.

The varnish....  A LOT of work and trouble in the varnish....and it's still not really "perfected" by any means yet. 

I like your carving but like the finish even more. One look shows you put a lot of time and effort into the finish. 

                  Joe.
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: incised craving
« Reply #5 on: April 19, 2011, 11:35:35 PM »
Eric Kettenburg and Allen Martin do a fantastic job of incised. Look on their websites.

tom
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline rick landes

  • Sr. Member
  • ****
  • Posts: 404
Re: incised craving
« Reply #6 on: April 19, 2011, 11:36:32 PM »
Thanks for sharing the pics. I am especially fond of the area near the tang. Very crisp!
I would like to know more about your finish efforts.
Logged
“No free man shall ever be de-barred the use of arms. The strongest reason for the people to retain their right to keep and bear arms is as a last resort to protect themselves against tyranny in government." Thomas Jefferson

Online Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: incised craving
« Reply #7 on: April 19, 2011, 11:51:09 PM »
RCA Volum I, #4.  Wonderful incised tang carving.  Study how details are handled.  Incised carving at its best is much more than a parallel sided line. 
Logged

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: incised craving
« Reply #8 on: April 20, 2011, 12:03:35 AM »
Check out the Lehigh Allen Martin just finished for Dane, it has a lot of incised stuff on it, well done too.   He's a magician
with that little veining tool...................Don
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: incised craving
« Reply #9 on: April 20, 2011, 12:04:15 AM »
Chris, you've been holding out on us with that Lehigh rifle!! Looks very neat.

Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: incised craving
« Reply #10 on: April 20, 2011, 12:29:06 AM »
  thanks chris; thats fantastic, great job, thats what i was looking for. what tools did you use? i've done three rifles years ago, and tried recently and didn't do so good, i guess i need sharper tools. i'll try again.
« Last Edit: April 20, 2011, 12:37:15 AM by yip »
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: incised craving
« Reply #11 on: April 20, 2011, 01:30:52 AM »
I agree Chris, very nice and what tools Did you use?
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: incised craving
« Reply #12 on: April 20, 2011, 09:36:09 AM »
Pretty much entirely done with the narrower "V" tool (a Pfeil) and a small rounded gouge for cutting the little chip marks.  I had the hardest time with the varnish.  Hard to keep it from mudding up the carving.  So my carving actually looks better than it does here!   ;D

I generally push the tool with my hand, only driving it with a mallet on the tightest of curls.
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline Frank Barker

  • Hero Member
  • *****
  • Posts: 575
Re: incised craving
« Reply #13 on: April 20, 2011, 11:34:02 AM »
Chris, that carving is right up there with the best of them. Very nicely done.
Logged
Pages: [1]   Go Up
« previous next »