Author Topic: Don't laugh too hard....  (Read 13455 times)

KennyC

  • Guest
Re: Don't laugh too hard....
« Reply #25 on: March 28, 2011, 05:53:25 AM »
Tell ya friend to check with you before buying any more powder . lol

Offline FL-Flintlock

  • Hero Member
  • *****
  • Posts: 2176
    • Fire & Iron Mfg.
Re: Don't laugh too hard....
« Reply #26 on: April 08, 2011, 11:57:34 AM »
Pyrodex is a lot less finicky than T7 which has a tendency to be somewhat particular depending on the application.  Pyrodex will work fine in any percussion gun provided the gun/load doesn’t create a lot of fouling issues.  Pyro also works quite well in cartridges, load the same as you would with real but the amount of compression can make a big difference in performance, IME minimal compression produces the highest consistency.  Larger cartridge cases and heavier projo’s are more to pyro’s liking, 160-180gr in .38s/.357m; 260-300gr in .44m/.45c; same in rifle cartridges, the more lead mass you park on top of it the better it works; strangely it does work well with lighter pellet payloads in smoothbores.  Yes, it is more corrosive than T7 or BP but if proper cleaning is done ASAP after shooting it’s not an issue, if using a repeater with fully resized cases, the action needs particular attention – cartridge cases must be decapped and thoroughly cleaned ASAP too but that applied to any corrosive powder/primers.  Pyro is unforgiving on clean-up, there’s a very limited grace period.  I’m no fan of Pyro but if it’s what you got or all you can get it’ll work.  As for C&B revolvers, thorough cleaning can be an issue with some of them depending on the mechanism and level of experience the shooter has with them, if the shooter isn’t experienced, I would strongly suggest he stick with gun designs that are easier to clean and I’d suggest avoiding complex snail/patent breeches. 
The answers you seek are found in the Word, not the world.

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Don't laugh too hard....
« Reply #27 on: April 09, 2011, 07:47:43 PM »
I finally gave away the last 4 pounds of Pyro that I bought in the 80's, I think. Glad it's gone. BP works, and works well. No reason to switch. Ya gotta feel for those folks in Hawaii who I understand can hardly lay hands on real BP! If you've got a yacht or plane headed that way, you could do well to take some along--except for the reselling thing. ;)
"Anything worth doing is worth doing slowly." Mae West

LURCHWV@BJS

  • Guest
Re: Don't laugh too hard....
« Reply #28 on: April 09, 2011, 10:06:23 PM »

  I also have some old Pyrodex lying around.  Wound up using some the other day. Had to use BP in the pan seemed a little slower than BP.  BP runs about $25 a pound here,  unless a friend of mine sells it to me at his cost, $13 a pound.  Pyrodex works well in Bright Eyes Traditions Caplock.  I just hate to throww it out.  Just have to clean the bore more often.


   Rich

Daryl

  • Guest
Re: Don't laugh too hard....
« Reply #29 on: April 10, 2011, 06:47:40 PM »
Innexpensive production rifles are the place to use it in, not in a valuable custom rifle or smoothbore.

Leatherbelly

  • Guest
Re: Don't laugh too hard....
« Reply #30 on: April 10, 2011, 08:00:56 PM »
 I think the garden is the best place to use it. ;D