« previous next »
Pages: [1]   Go Down

Author Topic: My Next Project Gun  (Read 3225 times)

Offline Keb

  • Hero Member
  • *****
  • Posts: 1193
  • south Ohio
My Next Project Gun
« on: June 20, 2011, 02:24:47 AM »
This gun is almost done. It's a .50 cal. rifled barrel tapered from 1.050" at breech to .830" at muzzle oct x 50" long.
The lock, side plate, trigger, nose cap & thimbles are home made.

It's heavy :/







I get this one done and I only have a .40 cal. rifle and a walnut fowler to finish. The .40 is as done as this one is. The fowler isn't :/
Logged

Offline RobertS

  • Sr. Member
  • ****
  • Posts: 388
Re: My Next Project Gun
« Reply #1 on: June 20, 2011, 06:43:54 AM »
Nice work, look forward to seeing it finished!
Logged

Rasch Chronicles

  • Guest
Re: My Next Project Gun
« Reply #2 on: June 20, 2011, 07:13:43 AM »
Totally clean lines. I really like it!

Is it getting a finish? Actually let me ask a few questions if you don't mind.

What kind of wood is it?
If you are going to use a finish, what are you planning on?
I'm always interested in the lock, sideplate, and the panels. I have been studying the examples shown on ALR trying to understand the aesthetics, symmetry, and proportions. Would you be so kind as to maybe add a couple of more photos of those areas if it's not too much trouble?

I really appreciate you sharing your work with us!

Best Regards,
Albert “Afghanus” Rasch
The Rasch Outdoor Chronicles™
The Best Turkey Hunting Tips!

Logged

Offline Tommy Bruce

  • Sr. Member
  • ****
  • Posts: 453
Re: My Next Project Gun
« Reply #3 on: June 20, 2011, 07:18:56 PM »
Keb,

Looks like you are pretty close to being done to me.
Logged
A man can never have too much red wine, too many books or too much ammunition”
R. Kipling

Offline Keb

  • Hero Member
  • *****
  • Posts: 1193
  • south Ohio
Re: My Next Project Gun
« Reply #4 on: June 21, 2011, 10:34:38 AM »
Quote from: Albert "Afghanus" Rasch on June 20, 2011, 07:13:43 AM
Totally clean lines. I really like it!

Is it getting a finish? Actually let me ask a few questions if you don't mind.

What kind of wood is it?
If you are going to use a finish, what are you planning on?
I'm always interested in the lock, sideplate, and the panels. I have been studying the examples shown on ALR trying to understand the aesthetics, symmetry, and proportions. Would you be so kind as to maybe add a couple of more photos of those areas if it's not too much trouble?

I really appreciate you sharing your work with us!

Best Regards,
Albert “Afghanus” Rasch
The Rasch Outdoor Chronicles™
The Best Turkey Hunting Tips!


The wood is maple and I will be using aquafortis on it then linseed oil. I will get some more pictures up later today. All that's left to do is finish carving, apply the regent & oil, some simple engraving, drilling the vent liner hole and filing the sights. This gun was built by Salvo but never finished. It will be going on the auction block when it's done. His widow needs the room in the gun safe. :)
Keb
Logged
Pages: [1]   Go Up
« previous next »