Hello, Thanks for the compliments. For this rifle, I used a straight, Douglas barrel, 13/16Th's across the flats; cut to 38", 1:66" twist, in .45 caliber. The length of pull is 13 1/2". Davis-double set triggers, the owner supplied the trigger guard, buttplate and patchbox. However, I did make the muzzle cap, side-plate, ramrod pipes, underlugs, sights and some of the screws.
As for the stock, just a nice piece of sugar maple. After the final shaping, the wood was scraped and burnished. I use a combination of Trans-Tint aniline dyes for color, and finished up with handrubbed boiled linseed oil. The barrel and hardware were slowly rusted in a damp box.
Kind regards
Bart