Author Topic: Tower Flint Lock Sea Service Pistol ca 1796 (Read 2165 times)

runastav · « **on:** October 14, 2022, 12:11:26 PM »

Hi Guys!
Here I have a nice pistol who needs some reapere. Start clean up the hammer and with the missing topjaw!
Runar

LynnC · « **Reply #1 on:** October 14, 2022, 04:11:56 PM »

I always enjoy watching your work in progress.

Curtis · « **Reply #2 on:** October 15, 2022, 08:25:53 AM »

Runar, you are a truly practical gunsmith. You think parallel to my methods... except when you think way ahead of me! I like your solutions.

Curtis

LilysDad · « **Reply #3 on:** October 15, 2022, 03:40:49 PM »

Why do you suppose the hammer appears so much more worse for wear?

JTR · « **Reply #4 on:** October 15, 2022, 06:46:01 PM »

Quote from: LilysDad on October 15, 2022, 03:40:49 PM

Why do you suppose the hammer appears so much more worse for wear?

Because it's probably not original to the lock.

Daryl · « **Reply #5 on:** October 15, 2022, 11:04:04 PM »

Quote from: LilysDad on October 15, 2022, 03:40:49 PM

Why do you suppose the hammer appears so much more worse for wear?

The hammer or the cock?

runastav · « **Reply #6 on:** October 16, 2022, 12:22:05 PM »

Hi all, and thank you! yes the cock is from a part gun

Ok, I dont bodder wayting a year for cast parts from engeland so I made a new mainspring so was missing.
Runar

Jeff Murray · « **Reply #7 on:** October 16, 2022, 11:48:18 PM »

I have an original Tower pistol that is identical with the exception of the military style ramrod setup on the pistol shown. Mine has a traditional thimble held in the stock by a pin and a wooden ramrod. The cock is identical in shape to the one shown and differs only in that mine has no double line engraved around the body of the cock. The top jaw that you created is very similar to the one on my pistol. Fun to see the restoration process and result.

runastav · « **Reply #8 on:** October 18, 2022, 11:46:49 AM »

Hi all, Jeff Murray show us photos of the pistol ;)Some woodwork, guys do you see the epoxy I now use? Knifemakers here like it very much!
Runar

runastav · « **Reply #9 on:** October 21, 2022, 08:59:06 AM »

Hi all! Pistol is done!
Runar

alacran · « **Reply #10 on:** October 21, 2022, 01:29:36 PM »

Yes, I do use that epoxy, but seldom in gun work. I mix it with Transtint stain and sometimes with very fine sawdust to fill in cracks in knots.
Their 5 minute epoxy is also very good and adequate for non-structural repairs.

Curtis · « **Reply #11 on:** October 25, 2022, 08:31:24 AM »

Turned out near perfect, Runar. Another project done well!

Curtis

runastav · « **Reply #12 on:** October 25, 2022, 05:12:20 PM »

Hi, and thank you guys! Sea survice pistols are nice, here is the original with my replika made from scratch some years ago. Its have lock kit from Blackley and son

Runar

Daryl · « **Reply #13 on:** October 26, 2022, 11:24:54 PM »

Nicely done, Runar, as usual.

taco650 · « **Reply #14 on:** October 28, 2022, 02:41:41 AM »

I'm always excited to read your posts Runar! Thank you again for sharing another project, I look forward to the next one!

Stuart

runastav · « **Reply #15 on:** November 02, 2022, 01:22:59 PM »

Thank you guys!
Runar

AmericanLongRifles Forums

News: