« previous next »
Pages: [1]   Go Down

Author Topic: A Verner companion piece  (Read 4779 times)

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
A Verner companion piece
« on: December 26, 2011, 01:19:07 AM »
       I recently completed a copy of RCA 63, "the Verner rifle," and posted some photos here on the forum.  With that project complete I decided that a companion piece was in order.  I had a 12" piece of 50 cal. barrel on hand, so it was shortened to 10" and turned half round.  The smallest lock I had available that would look right was an unused Hamm lock from many years ago.  Other than the cast trigger guard all parts were shop made.   I was unaware that Verner had made at least one pistol and was about three quarters done with the project, when a friend sent me photos of an original Verner pistol.   I decided to add a double headed eagle at the same place Verner did, and there were a few other differences.  The original version did not have an extended entry pipe, but it seems so classic to the school that I felt it should be there.  I guess this would be a good example of a piece that was inspired by a school of architecture, but not a copy.   I hope you enjoy it.
      A Merry Christmas to all and the best of the new year.





« Last Edit: April 08, 2020, 04:19:56 PM by rich pierce »
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Daniel Russell

  • Guest
Re: A Verner companion piece
« Reply #1 on: December 26, 2011, 02:27:55 AM »
Suberb interpretation of a "school".  Very well done, Ron.
Logged

Offline alex e.

  • Hero Member
  • *****
  • Posts: 772
Re: A Verner companion piece
« Reply #2 on: December 26, 2011, 05:23:08 AM »


You never cease to amaze!

Awesome!Work to  aspire to.

Alex..
Logged
Uva uvam videndo varia fit

Offline draken

  • Sr. Member
  • ****
  • Posts: 404
Re: A Verner companion piece
« Reply #3 on: December 26, 2011, 08:57:15 AM »
Very nice!   

I have a handful of antique sleigh bells like those, except the leather had rotted away long before I found them.    I intend to rivet them to a new strap one of these days.   

Anyway Lucky R A, that is one fine looking pistol!
Logged
Dick 

Times have sure changed. Gun control used to mean keeping the muzzle pointed in a safe direction

Never write a check with your mouth that your butt can't cash!

Offline Glenn

  • Hero Member
  • *****
  • Posts: 507
Re: A Verner companion piece
« Reply #4 on: December 26, 2011, 09:06:15 AM »
Very nice work.  Great idea to have a pistol along with the rifle.  Wood figure, finish, and lock selections look great.
Logged
Many of them cried; "Me no Alamo - Me no Goliad", and for most of them these were the last words they spoke.

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: A Verner companion piece
« Reply #5 on: December 26, 2011, 04:46:18 PM »
What a nice pair. I always enjoy your work so much Ron.
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: A Verner companion piece
« Reply #6 on: December 26, 2011, 05:54:23 PM »
 That's a Beauty.

 Tim C.
Logged

Offline b bogart

  • Hero Member
  • *****
  • Posts: 695
Re: A Verner companion piece
« Reply #7 on: December 26, 2011, 06:45:45 PM »
Excellent set Ron! Who wouldn't like that pair to carry around?
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: A Verner companion piece
« Reply #8 on: December 26, 2011, 08:23:05 PM »
Well done Ron.  And you beat me to it!!  After I finished my Verner, I thought too, that a Verner pistol would compliment the rifle very nicely.  So I took the photos of the two originals whose images are published, to Staples and enlarged them to full size.  But that's as far as I got, dang it.
I fully intend to follow up on my plan, and in the meantime, I am enjoying looking at yours.
Actually, I know of three originals that have been published, and the grip on yours is very close to the one that Jim Whisker presented in Muzzle Blasts last year some time.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline rsells

  • Hero Member
  • *****
  • Posts: 681
Re: A Verner companion piece
« Reply #9 on: December 26, 2011, 09:05:19 PM »
Really a great looking piece of work.  Thanks for sharing the photo's.
                                                            Roger Sells
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: A Verner companion piece
« Reply #10 on: December 26, 2011, 09:17:24 PM »
Beautiful sett!!! I really enjoy seeing your work.

Best regards
Rolf
Logged

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: A Verner companion piece
« Reply #11 on: December 26, 2011, 10:22:37 PM »
Ron, I love the entry pipe tang work. Well done as always.
Logged
Pages: [1]   Go Up
« previous next »