« previous next »
Pages: [1]   Go Down

Author Topic: Carving & inletting tools - recommendations?  (Read 3633 times)

Lee Slikkers

  • Guest
Carving & inletting tools - recommendations?
« on: January 31, 2012, 07:09:41 PM »
Hello folks, (still new here) I am looking for advice on a good set of entry level carving and inletting tools for my first build.  I don't need the cheapest available but I also cannot afford $400 sets either.  Can someone recommend a "short" list of what would be needed to see me through this project.

Thanks for any help...
Logged

fastfrankie

  • Guest
Re: Carving & inletting tools - recommendations?
« Reply #1 on: January 31, 2012, 07:55:18 PM »
I am new here myself, however, I would not buy a set of anything. Some of the tools in a set would most likely never get used (speaking from having been there years ago). I now buy or make what I need when I need it.
Logged

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Carving & inletting tools - recommendations?
« Reply #2 on: January 31, 2012, 08:23:11 PM »
Guys if you click on the rifle logo above and go to the Gunbuilding link you will find all kinds of good help including a tool list.

Buy 2 or three good chisels, and get familiar with whats out there and the when you have a real need buy another..etc.  so you don't end up with a bunch you never use.

 http://www.americanlongrifles.org/WorkShop_frame.htm

« Last Edit: February 01, 2012, 12:08:20 AM by Dr. Tim-Boone »
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Lee Slikkers

  • Guest
Re: Carving & inletting tools - recommendations?
« Reply #3 on: January 31, 2012, 08:54:16 PM »
Thanks for that link...I was trying to do a search on this topic but the # of threads that came up with those words was a bit daunting.  That link answered a bunch of my questions...thanks again!
Logged

Offline Clowdis

  • Sr. Member
  • ****
  • Posts: 457
Re: Carving & inletting tools - recommendations?
« Reply #4 on: January 31, 2012, 09:20:25 PM »
Another suggestion for chisels are the Brownells palm chisels http://www.brownells.com/.aspx/pid=25795/Product/PALM-CHISELS  I have found these extremely handy for small inletting jobs along with a straight 1/8" and 1/4" straight chisels. Of course you will need some larger chisels and gouges for barrel channels, etc.
Logged

Offline Jerry V Lape

  • Hero Member
  • *****
  • Posts: 3028
Re: Carving & inletting tools - recommendations?
« Reply #5 on: February 01, 2012, 12:11:39 AM »
I started with a selection of palm chisels and now they are pretty much not used.  Once I learned to use the mid length and full length chisels from Pfeil and their closest competitors  the palms just haven't been called on for very much.  This is just my experience and others may not be the same, but do try the longer stuff early before spending too much on the palms chisels.   
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18388
  • AKA TimBuckII
Re: Carving & inletting tools - recommendations?
« Reply #6 on: February 01, 2012, 02:01:42 AM »
Logged

Lee Slikkers

  • Guest
Re: Carving & inletting tools - recommendations?
« Reply #7 on: February 01, 2012, 02:45:06 AM »
For some reason it would not let me log onto that section...thanks though
Logged
Pages: [1]   Go Up
« previous next »