« previous next »
Pages: [1]   Go Down

Author Topic: Teastimonial  (Read 8380 times)

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Teastimonial
« on: July 08, 2008, 07:10:14 AM »
Juat got some castings from Dave Keck today. Perfect wax castings, minimal cleanup, squared up,soft yellow brass that matches most sand castings and sheet brass perfectly. Highest praise.  I spent the entire weekend on a sand cast T.G. and buttplate and I'm not done yet.
Logged

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Teastimonial
« Reply #1 on: July 08, 2008, 07:20:02 AM »
Contact info for Mr. Keck?


Ez
Logged
"Rules are for the obedience of fools and guidance of wise men"

Offline Dave B

  • Hero Member
  • *****
  • Posts: 3131
Re: Teastimonial
« Reply #2 on: July 08, 2008, 07:41:16 AM »
Ok Bill, fess up, how do we get a hold of this guy. It never too late to pick up some parts for the next project.
Logged
Dave Blaisdell

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1762
  • There's more than one way to skin a cat.
Re: Teastimonial
« Reply #3 on: July 08, 2008, 09:22:08 AM »
Ezra,

Dave's website is: www.knobmountainmuzzleloading.com
phpne(570)759-2053

He's got great brass!!

Best regards

Rolfkt
Logged

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1687
Re: Teastimonial
« Reply #4 on: July 08, 2008, 11:42:41 PM »
The casting set that Dave donated for the raffle rifle I built for this years Gunmaker's fair. Was the nicest castings I have ever worked with. The cast ramrod pipes actually had 3/8" dia. tubes that were not undersize, as every investment cast thimble I ever used to date was.  Really nice stuff to work with!
Logged
BJH

SPletcher

  • Guest
Re: Teastimonial
« Reply #5 on: July 09, 2008, 04:35:16 AM »
I am using them on my current project and they have been a joy to work with, brass is very easy to work and the clean up was very minimal

Steve
Logged

Offline Jim Filipski

  • Hero Member
  • *****
  • Posts: 642
    • Jim W. Filipski Flintlocks
Re: Teastimonial
« Reply #6 on: July 09, 2008, 04:05:00 PM »
Hi Guys
Do any of the links work on his site. I'm running 3 different browsers and the links  are dead. I know it says best with "IE" but if it is only set up for "IE" then he is loosing out on a lot of web traffic. Just another attempt at Bill Gates ruling the world!
Jim
Logged
" Associate with men of good quality,  if you esteem your own reputation:
for it is better to be alone than in bad company. "      -   George Washington

"A brush of the hand
of Providence is behind what is done with good heart."

Offline deano

  • Full Member
  • ***
  • Posts: 163
Re: Teastimonial
« Reply #7 on: July 09, 2008, 04:49:13 PM »
I just looked at the Knob Creek site and wondered if anyone had built a gun from his Fordney pattern and parts?

Ken
Logged

Offline Knob Mountain

  • Full Member
  • ***
  • Posts: 158
    • Knob Mountain Muzzleloading
Re: Teastimonial
« Reply #8 on: July 09, 2008, 10:17:28 PM »
Guys, Thanks for the compliments.

 I must apologize for my lackluster/ faulty website.  It has been a work in progress from day one.  For numerous reasons its never been finished.. Between inletting barrels, shaping stocks,pouring waxes and castings and a part time job.. etc.  etc... it been a slow progress.
 
 If you send me your address I'll mail you a brochure.

Dave
 
Logged
Dave Keck  Knob Mountain Muzzleloading Berwick, PA

Offline Jim Filipski

  • Hero Member
  • *****
  • Posts: 642
    • Jim W. Filipski Flintlocks
Re: Teastimonial
« Reply #9 on: July 10, 2008, 01:26:15 AM »
Quote from: Knob Mountain on July 09, 2008, 10:17:28 PM
Guys, Thanks for the compliments.

 I must apologize for my lackluster/ faulty website.  It has been a work in progress from day one.  For numerous reasons its never been finished.. Between inletting barrels, shaping stocks,pouring waxes and castings and a part time job.. etc.  etc... it been a slow progress.
 
 If you send me your address I'll mail you a brochure.

Dave
 

. 
Hi Dave,
Thanks for e-mailing me direct
I just was confused that folks were talking about the website and I couldn't get any links to work
(Sometime web designers have a tendency to forget that Windows is not the only systems out there.)
Considering all the other Important things you are doing you surely are excused!!!
Thanks
Jim
Logged
" Associate with men of good quality,  if you esteem your own reputation:
for it is better to be alone than in bad company. "      -   George Washington

"A brush of the hand
of Providence is behind what is done with good heart."

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Re: Teastimonial
« Reply #10 on: July 10, 2008, 07:40:19 AM »
Dave's Fordney is very good. He has a B.P. and Reeves Goering as T.G.'s at the moment cast from originals. The pipes from Dave are forthcoming.  His Lancaster pipes that he has now are not out of the question. as long as you file in flats behind the thumbnail.
Logged

Offline deano

  • Full Member
  • ***
  • Posts: 163
Re: Teastimonial
« Reply #11 on: July 10, 2008, 04:11:32 PM »
Thanks for the suggestions on the Fordney, Bill.

Ken
Logged
Pages: [1]   Go Up
« previous next »