« previous next »
Pages: [1]   Go Down

Author Topic: removing a lockplate stamped letters  (Read 4011 times)

Offline alex e.

  • Hero Member
  • *****
  • Posts: 772
removing a lockplate stamped letters
« on: June 10, 2013, 10:40:03 PM »
I want to use  TOW's new  FDC lock for a build other than a  FDC I want to remove the Stamped  "Tulle" from the lock plate.
I'm thinking grind it out the fill with weld.
I know it will not file out.

BTW,Ive used this lock already and it very nice,Its about 99% PC.
Thanks ,alex E.
Logged
Uva uvam videndo varia fit

Offline Acer Saccharum

  • Administrator
  • Hero Member
  • *
  • Posts: 19311
    • Thomas A Curran
Re: removing a lockplate stamped letters
« Reply #1 on: June 10, 2013, 11:17:10 PM »
You can inlet a panel, and re-engrave your favorite maker's name.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4463
    • Personal Website
Re: removing a lockplate stamped letters
« Reply #2 on: June 11, 2013, 01:49:44 AM »
Could also just inlay soft iron wire in the cast in lettering.
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12660
Re: removing a lockplate stamped letters
« Reply #3 on: June 11, 2013, 02:16:37 AM »
Alex, there are several locks that are very similar to TOW's (Davis) Tulle lock.  The Jack Haugh lock is virtually the same, and has no lettering.
« Last Edit: June 11, 2013, 02:17:02 AM by D. Taylor Sapergia »
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3002
Re: removing a lockplate stamped letters
« Reply #4 on: June 11, 2013, 02:26:48 AM »
Alex,
I used a pedersoli tower lock for a fowler and didn't want the cast in engraving and name. I had the engraving and name welded over, modified the lock plate dimension and then filed the plate into a round face style. Not a sign of anything anywhere.
Mark
Logged
Mark

mattdog

  • Guest
Re: removing a lockplate stamped letters
« Reply #5 on: June 11, 2013, 04:13:26 PM »
I have "erased" cast-in engraving and stamps on several locks by laying weld over the top with a TIG welder, then file/grind/sand/ polish it out.  I'm sure a MIG machine would do the job just as well if used by a skilled person.
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: removing a lockplate stamped letters
« Reply #6 on: June 11, 2013, 07:49:20 PM »
You can just peen it out.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline alex e.

  • Hero Member
  • *****
  • Posts: 772
Re: removing a lockplate stamped letters
« Reply #7 on: June 12, 2013, 03:49:04 AM »
Mike,I like that idea the best for this project .Almost too easy ;)

thanks guys!
Logged
Uva uvam videndo varia fit

Offline b bogart

  • Hero Member
  • *****
  • Posts: 695
Re: removing a lockplate stamped letters
« Reply #8 on: June 12, 2013, 04:18:10 AM »
Alex shopw us some in progress photos if you can. I gotta do one and want to see how well this works.Thanks!
Logged

Offline sqrldog

  • Hero Member
  • *****
  • Posts: 986
Re: removing a lockplate stamped letters
« Reply #9 on: June 12, 2013, 04:52:23 AM »
Alex I think most of the methods mentioned will work. I agree with the use of a tig welder. I have had several Siler plates filled in to make flat plates without the detail cast in the tail of the plate. Local shop charged me five dollars. Had to wait till he took a break to keep the cost down. I let him look at rifle I made kind of let him see what I wanted. I was a little worried about heat warping the plate but clamped the plate to a metal table and the plate was hardly warm when he finished the weld job. All it took was a little file work
the plate looked as if was made flat originally. Good luck with the method you choose.Tim
Logged
Pages: [1]   Go Up
« previous next »