« previous next »
Pages: [1]   Go Down

Author Topic: Need a RR tip source...  (Read 4780 times)

kaintuck

  • Guest
Need a RR tip source...
« on: July 04, 2014, 01:31:34 PM »
Fellas, I need a iron RR tip, one with a slight taper, and tapped with 8-32 or10-32 inside threaded.
I saw one original years ago, and just like it's idea.....anybody know a supplier???

Tired of the TOTW brass ends.......

Marc
Logged

tuffy

  • Guest
Re: Need a RR tip source...
« Reply #1 on: July 04, 2014, 02:24:08 PM »
Try this one. He is under "members shop made tools".
http://americanlongrifles.org/forum/index.php?topic=14341.0

           CW
Logged

Offline Ryan McNabb

  • Full Member
  • ***
  • Posts: 234
    • McNabb's Station
Re: Need a RR tip source...
« Reply #2 on: July 04, 2014, 03:17:03 PM »
I use Cabin Creek's tips.  Waiting on 4 more now.
Logged

Offline RHoyle

  • Starting Member
  • *
  • Posts: 28
Re: Need a RR tip source...
« Reply #3 on: July 04, 2014, 04:01:30 PM »
i used one of Darrin McDonal's (link above in previous post) on my last build and am well pleased with it.
Roger
Logged

Offline Pete G.

  • Hero Member
  • *****
  • Posts: 2013
Re: Need a RR tip source...
« Reply #4 on: July 04, 2014, 04:16:21 PM »
One of Herschel's videos has a section on making one; using a nail set as a form.
Logged

Offline davec2

  • Hero Member
  • *****
  • Posts: 2984
    • The Lucky Bag
Re: Need a RR tip source...
« Reply #5 on: July 04, 2014, 06:28:50 PM »
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

kaintuck

  • Guest
Re: Need a RR tip source...
« Reply #6 on: July 04, 2014, 11:48:58 PM »
Thank you!......this gives me address's.....I may get to the Lexington show and look at some in hand....
Marc
Logged

Offline Virginiarifleman

  • Sr. Member
  • ****
  • Posts: 490
Re: Need a RR tip source...
« Reply #7 on: July 07, 2014, 04:09:11 AM »
Try Larry Callahan also, he will make whatever you need. Calahan Moulds & accoutraments.com
Logged

Sawatis

  • Guest
Re: Need a RR tip source...
« Reply #8 on: July 07, 2014, 09:26:16 PM »
Frank house does a great tutorial on making them in one of the Pioneer videos too... Gun Builders Companion series
Logged

chubby

  • Guest
Re: Need a RR tip source...
« Reply #9 on: July 08, 2014, 12:42:58 AM »
TOTW has iron tips in all sizes, put one on a piece of ramrod put in a drill and taper yourself. you can make any taper you want!  Chubby
Logged

kaintuck

  • Guest
Re: Need a RR tip source...
« Reply #10 on: July 23, 2014, 02:30:12 PM »
 ;Dhappy with cabin creeks tip.......thanks fellas...I will post pics when done.
Marc n tom tom
Logged

whetrock

  • Guest
Re: Need a RR tip source...
« Reply #11 on: July 26, 2014, 11:55:07 PM »
Hey Kaintuck, Thanks for posting pictures on the other thread.
Hey, can you ask Tom Tom if he noticed how that tip from Cabin Creek was made? Was it drilled from a solid material, or was it made from sheet material that was wrapped and brazed?
Whet

PS: Also wondering when Tom Tom might graduate from apprentice to journeyman... Just wondering, you know. I might want to put in an order for a new Lancaster once he sets up shop... ;)
« Last Edit: July 26, 2014, 11:58:41 PM by Whetrock (PLB) »
Logged

kaintuck

  • Guest
Re: Need a RR tip source...
« Reply #12 on: July 27, 2014, 03:20:21 AM »
Plb, tomtom said it was a turned piece from metal......didn't see it as a wrapped/brazed tip.
I will look at the CLA show next month to see if there are different ones.....maybe someone at Dixons could share who has what......

As for tom tom......he is turning Mexican on us......taking more and more siestas ....and they are getting longer......found him today sleeping in the sandpaper box.......flattened all the rolls ::)

Useless kat........
Marc
Logged
Pages: [1]   Go Up
« previous next »