« previous next »
Pages: [1]   Go Down

Author Topic: lock won't set when cocked  (Read 4468 times)

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
lock won't set when cocked
« on: September 27, 2014, 01:51:39 AM »
this is almost a new lock, built rifle last spring large chambers flint
when it is fully cocked it seems the fly wont lock up the flint falls very light
lock is out of the rifle
any ideas or do I send it back to jim??
thanks paul
« Last Edit: September 27, 2014, 01:52:24 AM by hortonstn »
Logged

jamesthomas

  • Guest
Re: lock won't set when cocked
« Reply #1 on: September 27, 2014, 01:56:20 AM »
 Might try tightening up the 2 screws on the back a bit so that it engages everything. They might have worked loose just enough so that it won't set.
Logged

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: lock won't set when cocked
« Reply #2 on: September 27, 2014, 01:59:37 AM »
james tried that didn't seem to help
thanks paul
Logged

eddillon

  • Guest
Re: lock won't set when cocked
« Reply #3 on: September 27, 2014, 02:10:15 AM »
Maybe the bridle is binding on the tumbler and fly.
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: lock won't set when cocked
« Reply #4 on: September 27, 2014, 02:41:25 AM »
I am unable to translate your question.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: lock won't set when cocked
« Reply #5 on: September 27, 2014, 03:36:48 AM »
Hortonstn, I don't know what you mean 'when it is fully cocked it seems the fly wont lock up the flint falls very light'

To me, it sounds like the fly is too long, causing a lot of friction against the sear when the hammer tries to fall. If this is correct, and you are not comfortable figuring out the fix, I'd recommend contacting the dealer/manufacturer.
« Last Edit: September 27, 2014, 04:00:52 AM by Acer Saccharum »
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Virginiarifleman

  • Sr. Member
  • ****
  • Posts: 491
Re: lock won't set when cocked
« Reply #6 on: September 27, 2014, 03:38:50 AM »
I think I would contact jim, then go from there.
Logged

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: lock won't set when cocked
« Reply #7 on: September 27, 2014, 04:28:25 AM »
Going back to jim, really appreciate your thoughts
Paul
After 20 builds never had this happen
Logged

Offline frogwalking

  • Hero Member
  • *****
  • Posts: 1044
Re: lock won't set when cocked
« Reply #8 on: September 27, 2014, 07:53:26 PM »
I think if you really want helpful suggestions from this group, you are going to have to explain  your issue more clearly.  The first thing that comes to my mind, is what kind of triggers do you have, and is the problem the same in and out of the stock?  Also, what, exactly, is the problem?  Have you dissembled the lock?  What kind of lubricant are you using?  I often initially have issues with wood interfering with lock operation, or double set trigger fitment posing as lock problems.
Logged
Quality, schedule, price; Pick any two.

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1690
Re: lock won't set when cocked
« Reply #9 on: September 27, 2014, 08:04:29 PM »
Sounds like something's bent or rusty. Disasenbly is probably in order. Make sure you use a mainspring vise.BJH
Logged
BJH

Offline Robby

  • Hero Member
  • *****
  • Posts: 2655
  • NYSSR ―
Re: lock won't set when cocked
« Reply #10 on: September 27, 2014, 08:30:18 PM »
I seem to remember Jim saying that the vast majority of locks returned for service needed only to be properly lubricated. You might start there.
When your car stalls by the side of the road, don't tear the engine apart, check the gas gauge first. ;)
Robby
Logged
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: lock won't set when cocked
« Reply #11 on: September 29, 2014, 08:23:25 PM »
disassembled lock, put it back together, works fine now
thanks
paul
Logged
Pages: [1]   Go Up
« previous next »