Author Topic: Christmas smalls  (Read 8179 times)

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Christmas smalls
« on: December 22, 2014, 02:50:57 PM »


Here are a few things I've made up for Christmas. The horn container is the 1st turned piece I've made and is 2 1/4"x3 1/2". The 40 cal. bullet block was made out of curly maple, caribou antler and silver wire inlay. The brass jag set is for 36,40,45,50, and 54 caliber firearms(threads are steel)

Offline EricEwing

  • Hero Member
  • *****
  • Posts: 591
    • https://www.ericewingmaker.com/
Re: Christmas smalls
« Reply #1 on: December 22, 2014, 05:52:29 PM »
Nice stuff!

Offline C Wallingford

  • Hero Member
  • *****
  • Posts: 863
  • Northern Kentucky
    • CW Knives
Re: Christmas smalls
« Reply #2 on: December 22, 2014, 07:30:54 PM »
Thanks Colin, just send them down here since I am such a nice guy. LOL

Offline Gary Tucker

  • Full Member
  • ***
  • Posts: 236
Re: Christmas smalls
« Reply #3 on: December 22, 2014, 11:28:41 PM »
Who said you were a nice guy Charlie?
Gary Tucker

Offline Tony N

  • Hero Member
  • *****
  • Posts: 646
  • Rabbit Hash,Ky
Re: Christmas smalls
« Reply #4 on: December 23, 2014, 01:43:56 AM »
All very nice!  Love the bullet block!
~Tony

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Re: Christmas smalls
« Reply #5 on: December 23, 2014, 04:36:14 PM »
Thanks guys. Sorry Charlie these are already taken. Getting harder and harder to come up with ideas for my family members.....They already have many different items that I have made. Should have a few more bullet blocks to show today

Offline C Wallingford

  • Hero Member
  • *****
  • Posts: 863
  • Northern Kentucky
    • CW Knives
Re: Christmas smalls
« Reply #6 on: December 23, 2014, 10:27:32 PM »
They all look great. Keep on keepig on.

Offline crowbarforge

  • Full Member
  • ***
  • Posts: 113
Re: Christmas smalls
« Reply #7 on: December 23, 2014, 10:37:05 PM »
Nicely done.  Fine handmade gifts!

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Re: Christmas smalls
« Reply #8 on: December 23, 2014, 10:59:19 PM »
Thanks again. I just did a .62 bullet block with a caribou bird inlay, and a .54 with a brass thistle inlay as well. For the life of me I cannot get a picture to come out well. I have messed with all the settings. Maybe time to retire that camera and get a better one. I hate making these things and not having a decent photo to keep

Offline EricEwing

  • Hero Member
  • *****
  • Posts: 591
    • https://www.ericewingmaker.com/
Re: Christmas smalls
« Reply #9 on: December 23, 2014, 11:16:10 PM »
try outdoor photography, on overcast days

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Christmas smalls
« Reply #10 on: December 24, 2014, 09:39:59 AM »
It is not the camera, it is the lighting.   I shoot everything full manual.   How well a photo turns out is directly proportional to how long it takes to setup the lighting.   If I use flash,  it takes at least three hours of setup to get a magazine quality photo.   Most of the time,  I just let myself be satisfied with what I get from my iPhone. 

Outside on an overcast day against a simple, light colored background is the quickest and easiest way to get a good photo, even if not the most convenient in terms of timing.    A large diffuser like a white sheet or clear shower curtain, can turn a sunny day into an overcast day.   Also, Northern, or other indirect light through an open garage door or a large picture window, also works wonders.   

Like I said,  it is all about the light.   You can use various things to reflect light where you want it and diffuse it when hitting your subject.   White poster board and aluminum foil work as well as anything to reflect light.    I will also use white ceilings and walls to diffuse and redirect light.   A single flash unit reflected off a ceiling or wall can provide quite good light in some places.   You have to play with the light very much like you play pool.   

The next thing you must be aware of is the white balance or the temperature(color) of the light you are using to illuminate your subject.  You must tell your camera the temperature of the light you are using so that it can assign the correct color values.   This is the White Balance and most cameras have a setting for this.   Usually,  it is in terms of Sunny, Cloudy, Shade, Flash, Tungsten, or Fluorescent.   Usually,  Sunny, Cloudy, Flash, or Tungsten cover it.  The temperature of Cloudy and Flash are very close to each other.  In the film days,  you picked a film to match the temperature of the light you were using.   With digital cameras, you set the white balance.   

The same goes for the ISO.  However, for subjects that don't move,  you use ISO 100 and a tripod or other stand for your camera.  You then set the exposure for how ever long the light meter tells you.    I routinely shoots exposures of several seconds doing the interior of a building.    If what you are photographing doesn't move,  it doesn't matter about the exposure time.    The aperture is the best for your subject and desired depth of field.  I have found that f/16 is best for guns and such that you photograph close.   F/11 generally gives the best detail and depth of field for photographing large areas.   Portraits are usually done with the largest aperture your lens will handle so that only the eyes are sharp and everything else is slightly out of focus, the background being completely blurred.

As the preceding should have hinted at,  it is knowledge that makes a good photograph, not the camera.   This is a continual sore point with professional photographers.   The general public seems to think an expensive camera is what produces a good photograph.    The most expensive cameras, like say an Hasselblad,  have very few advanced (microprocessor based) features as they are almost always used full manual.  Cameras designed for professional use are usually simpler, requiring more input from the photographer, and assuming significant post processing.  Pros really prefer simple cameras.  If I could afford it,  I would use a little Leica as my personal camera.   They cost upwards  of $10K, are about the size of and thickness of two iPhones , and have very few features aside from autofocus. 

So, don't buy a new camera; buy this book; Light Science and Magic: An introduction to photographic lighting http://www.amazon.com/Light-Science-Magic-Introduction-Photographic/dp/0240812255.


Online Daryl

  • Hero Member
  • *****
  • Posts: 15851
Re: Christmas smalls
« Reply #11 on: December 26, 2014, 07:55:26 PM »
Looks great, cmac.

A suggestion if I might. For anyone making a loading block, be very careful when drilling the holes - drill slowly for as smooth as possible hole, then sand them with fine paper, making them VERY smooth, then finish them like a rifle stock using something like spar varnish, which is quite water/oil resistant. Alternatively, you could soak the block with it's smooth holes in Track's mink oil, or Neetsfoot oil so it absorbs all it can.

All of this is to prevent the block from absorbing the lube from your patches, thus causing a 'dry' load and spoiling the point of impact so carefully worked out prior to this, at the range. I checked this "finishing the block suggestion" of Taylor's, when testing techniques, years ago. Loading your block with patched balls and leaving it for a time, once a day or more often, re-wetting the patches with oil, will also help the block to soak up oil to the point it does not have the opportunity to spoil your shooting.

« Last Edit: December 31, 2014, 07:37:26 PM by Daryl »
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: Christmas smalls
« Reply #12 on: December 26, 2014, 08:31:54 PM »
What DS said!!!

I loaded from my new block (Osage) for the first time recently and found the patch a just a little bit dry.  Time to soak/ream/polish as necessary.
Hold to the Wind

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Re: Christmas smalls
« Reply #13 on: January 12, 2015, 01:29:12 AM »
Thanks for the complements and information guys. The holes in these blocks where actually made undersize because I didn't know the patch/ball combination to be used...so they will be sanded out quite a bit.

Online old george

  • Hero Member
  • *****
  • Posts: 712
Re: Christmas smalls
« Reply #14 on: January 12, 2015, 02:03:33 AM »
Those are some nifty presents would have loved to have found them in my stocking :)

OG
I cannot go to Hades: Satan has a restraining order against me. :)