« previous next »
Pages: [1]   Go Down

Author Topic: mould  (Read 7204 times)

Offline little joe

  • Hero Member
  • *****
  • Posts: 685
mould
« on: February 23, 2015, 07:29:44 PM »
Does anyone know who could cherry a Lyman .395 mold out to .410. Thanks
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2393
Re: mould
« Reply #1 on: February 23, 2015, 08:04:29 PM »
Why mess up a Lyman mold?  Just buy the size you want for less money.....

http://www.jt-bullet-moulds.co.uk/moulds.html

The link above can make any size you want.  He is fast, fair and make beautiful molds.


« Last Edit: February 23, 2015, 08:11:01 PM by Scota4570 »
Logged

Offline little joe

  • Hero Member
  • *****
  • Posts: 685
Re: mould
« Reply #2 on: February 23, 2015, 08:38:57 PM »
  Sorry to say I had forget about Jeff. I have delt with Jeff and was happy. I have a email off to him now. Thanks for jogging my mind.  Joe
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: mould
« Reply #3 on: February 24, 2015, 08:16:28 PM »
The smallest Tanner mould I have, is .595". I cannot imagine using one smaller- but, with oddball sizes, he might be the only venture.

A .410"mold sounds as if for a .410 bore that someone rifled - or for an original .42 cal rifle with narrow grooves?
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: mould
« Reply #4 on: February 24, 2015, 08:30:08 PM »
I just ordered one from Jeff in .950".
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline little joe

  • Hero Member
  • *****
  • Posts: 685
Re: mould
« Reply #5 on: February 24, 2015, 10:20:17 PM »
Daryel The bbl is a Jenkins from Kentucky. It was a 40 cal and he recut it to 42 cal. Many years ago Bill Large cut several molds out for me and I was hoping to cherry a .395 Lyman dual cavity out to .410, however I will most likely get one from Jeff. Joe
Logged

Offline drago

  • Full Member
  • ***
  • Posts: 147
Re: mould
« Reply #6 on: February 25, 2015, 02:38:46 AM »
Quote from: D. Taylor Sapergia on February 24, 2015, 08:30:08 PM
I just ordered one from Jeff in .950".
That sounds like quite the squirrel gun. I guess you just bark the base of the tree?
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2393
Re: mould
« Reply #7 on: February 25, 2015, 08:51:18 AM »
I got a .990" from him.  It is very nice.  The price was a bargain. 
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: mould
« Reply #8 on: February 25, 2015, 08:21:24 PM »
I have a Jeff Tanner mold I bought a pretty long time ago.  The price was both a surprise and a delight.  It's a .590" and is excellent.  I received it so quickly I thought it must have been sent local.  He's just that fast and that good.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15832
Re: mould
« Reply #9 on: February 25, 2015, 08:58:20 PM »
Quote from: drago on February 25, 2015, 02:38:46 AM
Quote from: D. Taylor Sapergia on February 24, 2015, 08:30:08 PM
I just ordered one from Jeff in .950".
That sounds like quite the squirrel gun. I guess you just bark the base of the tree?

LOL
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Dave R

  • Hero Member
  • *****
  • Posts: 678
Re: mould
« Reply #10 on: February 25, 2015, 09:33:38 PM »
Little Joe,
What does the 42 cal barrel mike across the lands? If it is a few thousands over you may be able to use a .420 mold? If so I have a .420" Lyman mold I could be talked out of.
Logged

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: mould
« Reply #11 on: February 26, 2015, 06:22:23 AM »
I have a .530 JT and am fully satisfied.  Not afraid to try a 40.
Logged
Hold to the Wind

Offline little joe

  • Hero Member
  • *****
  • Posts: 685
Re: mould
« Reply #12 on: February 26, 2015, 10:12:06 PM »
Quote from: Dave R on February 25, 2015, 09:33:38 PM
Little Joe,
What does the 42 cal barrel mike across the lands? If it is a few thousands over you may be able to use a .420 mold? If so I have a .420" Lyman mold I could be talked out of.
The rifle I sold and the owner has requested help on the mold so I,m forewarding  the Jeff Tanner info to him. Thanks guys
Logged

Greyfeather

  • Guest
Re: mould
« Reply #13 on: March 05, 2015, 03:22:41 AM »
Buffalo Arms sells a .410 RB mould.
Logged

Offline Steve-ALA

  • Starting Member
  • *
  • Posts: 37
Re: mould
« Reply #14 on: March 05, 2015, 04:29:32 AM »
Larry Callahan will make any size you want
Logged
Pages: [1]   Go Up
« previous next »