« previous next »
Pages: [1]   Go Down

Author Topic: Hello! New to Forum  (Read 2490 times)

Billy52

  • Guest
Hello! New to Forum
« on: May 04, 2015, 04:10:36 AM »
Hello everybody. I am new to the forum and just wanted to say hello.  I have thought about building a long rifle for a long time.  I am currently building a Lyman Great Plains Rifle from a kit (.54 cal  flintlock).  I am enjoying it a lot and am already shopping for my next project…..although the current kit is only half done. I was not keen on a "kit" but one has to start somewhere and I am learning a lot.  I am most definitely bitten by the bug….I have also recently purchased an old (70's??) spanish hawken style flintlock to practice on….dovetailing…etc…I am sure I am going to make a lot of mistakes and will be asking for some advice or direction.  Look forward to further discussion with everybody
Cheers, Billy……..a new rookie
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Hello! New to Forum
« Reply #1 on: May 04, 2015, 04:19:06 AM »
Welcome to the board, Billy. A kit is an excellent way to get started. You'll get the feel of what's going on wit longrifles.

Take note of the breech area on your current build. When you build another gun, you'll need to be placing all those screws without interfering the ramrod, where to place the tang screw, etc.

Good luck!

Tom

Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2465
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Hello! New to Forum
« Reply #2 on: May 04, 2015, 04:52:39 AM »
Welcome,Billy,there is much  good folks here,and smart,too,well,ceptin maybe me ,sometimes.The Lyman should be a good shooter,the ones I have had are.Just pretend you are a sponge,and soak up as much info as you can.Again,welcome,and enjoy the ride. best regards,Dave in Wva mountains ;D
Logged

obsidian

  • Guest
Re: Hello! New to Forum
« Reply #3 on: May 04, 2015, 07:17:37 AM »
Hey Billy,
Your beginnings sound a lot like mine.  I bought a GPR on gunbroker that was assembled but not "worked down" as needed.  I took her all apart, reworked the tang bend, got rid of the perch belly, and in my case replaced the lock.  You will find some really good instruction on here about what needs to be done to get her looking sweet.  Taylor has posted some good hints and you can see mine and others on here as well.  And I really do know all about gettin bit by this bug-it can hit you hard but at least the little lady knows where you are late at night!!
Rich
Logged

Billy52

  • Guest
Re: Hello! New to Forum
« Reply #4 on: May 04, 2015, 07:23:47 AM »
You are right there Rich. I just finished my shop as well….friggin' thing is a time warp machine……feels like i've been in there two minutes when it has been 4 hours….
Logged

greybeard

  • Guest
Re: Hello! New to Forum
« Reply #5 on: May 05, 2015, 01:47:06 AM »
Welcome.  There is a wealth of info on this site and many master builders that are willing to share their knowledge. Enjoy. Bob
Logged
Pages: [1]   Go Up
« previous next »