Author Topic: Percussion Caps Hard To Find Here (Read 29034 times)

retired fella · « **Reply #25 on:** December 18, 2015, 08:48:49 PM »

Thank you Bob,

That was a fascinating tutorial. Last time I bought caps they were 50 cents a tin of 100. I have long since gone over to the dark side with rock locks. It always amazes me of the ingenuity of the BP community.

J Henry · « **Reply #26 on:** December 18, 2015, 09:09:11 PM »

NOW is the time to stock up,,hunting season is over so they go on clearance,,I buy all I can now for later....WalMart has been my best source in the past.

Shreckmeister · « **Reply #27 on:** December 18, 2015, 11:03:41 PM »

Quote from: ScottH on December 18, 2015, 03:28:14 AM

Shreckmeister probably bought RWS Dynamit Nobel caps made in Germany.
They call them No. 1075 plus.
They have a tiny "U" on the top.
Most of the time these will work just fine on a standard #11 nipple.
Also these are reported to be one of the hottest caps available.

I have used them, no complaints except that they are more expensive than CCI #11 Magnums (which I can not find any of them in my area).

Yes, that's what I have. Thanks for the info all.

Fowlerman · « **Reply #28 on:** December 19, 2015, 04:58:54 PM »

Go to the dollar store and buy the 6 shooter cap gun caps 100 for 99 cents works just the same in fact I have a couple packs in fact I have some in my food storage

Eric Krewson · « **Reply #29 on:** December 19, 2015, 11:01:12 PM »

Apparently there is a guy named Kevin the cap maker who is selling a Tap-A-Cap clone.

Here is a video of a guy using his cap maker.

More info;

https://forums.gunbroker.com/topic.asp?TOPIC_ID=633079

Mike Brooks · « **Reply #30 on:** December 20, 2015, 12:14:08 AM »

Quote from: Shreckmeister on December 17, 2015, 10:19:43 PM

Had a strange experience buying caps yesterday. I asked if they had any. They only had one size 10 3/4? Said it would work as an 11? Has
anyone used them as an 11? I assume they won't fit a 10? Paid $13 plus tax for 100...boo

10 3/4 is a new one on me.
I believe the main problem with supply is they fall under "Hazmat" regulation and fees.

bones92 · « **Reply #31 on:** December 20, 2015, 02:29:51 AM »

I saw caps available recently, all 100-count tins...

Tin of #10: $5.00
Tin of #11: $6.00
Tin of Musket caps: $7.00

Bought a couple of each.

Should probably have bought even more. I had paid $9 per tin of musket caps a few days before... My thought is, buy a few tins at a time, every time.

D. Buck Stopshere · « **Reply #32 on:** December 20, 2015, 02:59:56 AM »

Bones,

Where did you find those prices on caps?

Buck

culper · « **Reply #33 on:** December 20, 2015, 05:42:41 AM »

Cabela's has them at $55.00 per 1000. Remington is $78.00 per 1000.

Fred Hembree · « **Reply #34 on:** December 20, 2015, 06:40:51 AM »

I got 1,000 caps from Cabelas. They should last me a few years. I've enjoyed reading the many responses to this post.

bones92 · « **Reply #35 on:** December 20, 2015, 02:36:06 PM »

Buck, at the C&E show in Raleigh yesterday.

OldMtnMan · « **Reply #36 on:** December 24, 2015, 05:47:32 AM »

I guess i'm lucky. The local gun shop carries the CCI mag caps for $6.00, and is never out. He also carries the RSW musket caps for $8.00.

I gave up trying to talk him into carrying BP.

bigsmoke · « **Reply #37 on:** December 24, 2015, 08:02:17 PM »

I have always used the 1075 caps from RWS. Well, not always always, but always like for the last 40 years. I cannot recall ever having a mis-fire when I have done my job correctly. I was not really happy when they dropped the 1055 cap, as they worked really well on revolvers.
When you bought a case of 100,000, they came packed in a neat wooden box. Made wonderful storage boxes, but they come in cardboard boxes now. Too bad. Each container of 100 came in a metal container, now they are plastic. I guess we can mark that all up as "progress". Or it might have something to do with HazMat shipping rules, not sure.
I am probably down to about 3 or 4 rolls (1,000) of caps in my inventory right now. With the amount I have been shooting the last little while, sorry to say, that is probably a life time supply.
John

OldMtnMan · « **Reply #38 on:** December 24, 2015, 08:36:25 PM »

A 100,000!!!

That's a lot of shooting.

Fred Hembree · « **Reply #39 on:** December 30, 2015, 01:48:11 AM »

I guess you could say, "I'd rather have too many than not enough."
;-)

bigsmoke · « **Reply #40 on:** December 30, 2015, 02:46:49 AM »

Quote from: OldMtnMan on December 24, 2015, 08:36:25 PM

A 100,000!!!

That's a lot of shooting.

Yes, it sure is.

But the fact of the matter is I was selling them also. I probably went through half a dozen cases of 100,000 a year.

axelp · « **Reply #41 on:** December 31, 2015, 01:53:16 AM »

God created flint and scattered it over the earth so we would not need to worry about a shortage of per-cussin caps.

OldMtnMan · « **Reply #42 on:** December 31, 2015, 10:13:34 PM »

True Ken, but when you're into the half stock plains rifles you have no choice but to use caps.

Old Ford2 · « **Reply #43 on:** January 02, 2016, 04:11:58 PM »

Quote from: OldMtnMan on December 31, 2015, 10:13:34 PM

True Ken, but when you're into the half stock plains rifles you have no choice but to use caps.

That is exactly why they make half stocked " FLINT " plais rifles.

Those Hawken boys kept the best for themselves, they were just sellin' those percussin guns to the pilgrims.

Fred

OldMtnMan · « **Reply #44 on:** January 02, 2016, 06:44:48 PM »

Quote from: Old Ford2 on January 02, 2016, 04:11:58 PM

Quote from: OldMtnMan on December 31, 2015, 10:13:34 PM
True Ken, but when you're into the half stock plains rifles you have no choice but to use caps.

That is exactly why they make half stocked " FLINT " plais rifles.
Those Hawken boys kept the best for themselves, they were just sellin' those percussin guns to the pilgrims.

Fred

I researched until I was blue in the face. I couldn't find any Hawken half stock flinters. If you have any info on it i'd appreciate seeing it.

sqrldog · « **Reply #45 on:** January 02, 2016, 09:06:49 PM »

Look on Track of The Wolf under guns then flintrifles. Great plains Rifles.by Lyman in stock. Not exactly my cup of tea but there you are.

OldMtnMan · « **Reply #46 on:** January 03, 2016, 01:20:12 AM »

I'm talking about the real Hawken built by the Hawken Bros.

I know there's plenty of replicas that are a far cry for the real guns. They don't interest me much.

News:

Author Topic: Percussion Caps Hard To Find Here (Read 29034 times)

Fowlerman

Fred Hembree

Fred Hembree