« previous next »
Pages: [1]   Go Down

Author Topic: Flint Hawken  (Read 4940 times)

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12634
Flint Hawken
« on: April 10, 2016, 03:28:58 AM »
...and here's the flint Hawken I finished at the same time as the percussion rifle.  This one has a parallel 1 x .50 cal Douglas barrel that I also bobbed.  It was 40" when received and had been built into a very poor rifle. I salvaged it, filling all of the dovetails, and cut 4" from the muzzle and 1/4" from the breech.  The finished rifle weighs 9 pounds 6 oz.  The lock is a L & R Ashmore lock...great sparker!!

Dave Rase inlet the barrel and drilled the hole for me.
















I have a few more images I want to share, but have other obligations currently...more later.

« Last Edit: April 10, 2016, 03:36:02 AM by D. Taylor Sapergia »
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1989
  • the other Joe S.
Re: Flint Hawken
« Reply #1 on: April 10, 2016, 02:34:02 PM »
Nicely done sir.Great curl on that stock
« Last Edit: April 10, 2016, 02:45:20 PM by Joe S. »
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18291
  • AKA TimBuckII
Re: Flint Hawken
« Reply #2 on: April 10, 2016, 03:41:41 PM »
 Wow! Another Beauty.

   Tim C.
Logged

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13412
    • Mike Brooks Gunmaker
Re: Flint Hawken
« Reply #3 on: April 10, 2016, 04:01:42 PM »
Nice gun as I would expect. Only problem is it ain't near slabby enough....I have seen several original fullstock Hawken guns and they were all slab sided as a gun could get....I much prefer yours. ;D
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12634
Re: Flint Hawken
« Reply #4 on: April 10, 2016, 05:48:18 PM »
Interesting observation Mike.  Dave Rase cut the barrel channel and drilled the hole (3/8"), and he gave me the usual nice thin web.  The hole is exactly what I asked for.  But this rifle really needed at least a 1/4" web to get the depth in the forestock that is typical of originals.  This one ended up more like a Kentucky rifle in the forestock.  And the other result is a more rounded stock too.  But it feels good in the hand.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15582
Re: Flint Hawken
« Reply #5 on: April 10, 2016, 07:07:49 PM »
They both look really GREAT to me, Taylor - for Hawken rifles. (note I did not say Hawkens)
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline MontanaFrontier86

  • Full Member
  • ***
  • Posts: 109
Re: Flint Hawken
« Reply #6 on: April 10, 2016, 08:04:08 PM »
Beautiful gun. A piece of art!
Logged

Online Mike Brooks

  • Hero Member
  • *****
  • Posts: 13412
    • Mike Brooks Gunmaker
Re: Flint Hawken
« Reply #7 on: April 10, 2016, 11:12:16 PM »
Quote from: Daryl on April 10, 2016, 07:07:49 PM
They both look really GREAT to me, Taylor - for Hawken rifles. (note I did not say Hawkens)
You mean "HAWKINS"      ;)
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12634
Re: Flint Hawken
« Reply #8 on: April 11, 2016, 05:20:48 AM »
I have a friend you all know and love (Leatherbelly) who says to me, "Hey, you got some leads for my black powder?"  Along the same line as "Hawkins"!!
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2323
  • Missouri
Re: Flint Hawken
« Reply #9 on: April 11, 2016, 05:32:24 AM »
Taylor, I like this one even better than the percussion rifle.  Such graceful lines!  Even if David Rase is to blame for that....

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline Bill Ladd

  • Sr. Member
  • ****
  • Posts: 332
Re: Flint Hawken
« Reply #10 on: April 11, 2016, 03:37:37 PM »
This one's even more fine than that percussion you crafted.
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4309
  • If we need it here, make it here. Charlie Daniels
Re: Flint Hawken
« Reply #11 on: April 11, 2016, 05:44:15 PM »
Another great looking rifle.  I admire your workmanship.  I am using this rifle as inspiration to prioritize getting my in the white fullstock Hawken out of the rack and on the bench and completed.
David   
Logged
Pages: [1]   Go Up
« previous next »