Touch Hole Question

[BartSr]

Not traditional but would a .22 Pellet work? With the hollow base I would think it would expand into the rifling easily, similar to a Mine Ball. Some have little groves in them that would hold a touch of lube.
 As for the touch hole, I would think a 1/4 X 1/4 X 28 stainless set screw inserted backwards would work fine.

  Tim C.

OK Tim,
So far of three outings, this touch hole liner that you have suggested works great.  Thanks again!
Using NAA black powder bullets.

BartSr

[BartSr]

FYI,  I upped the main charge (from 8grs) to 20grs of Goex FFFg.  This helped eliminate the unburned crud in the barrel on that .22 cal flinter.

BartSr