Author Topic: Poured nose cap  (Read 2458 times)

Offline SHARPS4953

  • Starting Member
  • *
  • Posts: 38
Poured nose cap
« on: November 17, 2016, 06:04:07 AM »
Im building a Chambers Virginia  rifle which is brass mounted.  Ive always liked the look of a poured pewter nose cap. My question is, would this be historically correct?
Scott Fisher

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Poured nose cap
« Reply #1 on: November 17, 2016, 02:20:35 PM »
More of a later thing than and early thing.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Pete G.

  • Hero Member
  • *****
  • Posts: 2013
Re: Poured nose cap
« Reply #2 on: November 18, 2016, 04:30:29 PM »
The pewter is usually found on a later style iron mounted rifle. Since you have an early style rifle with brass mounts I would go with a one piece brass nosecap. Build it yourself to fit your stock rather than trying to make your stock fit a commercially made cap.

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Poured nose cap
« Reply #3 on: November 19, 2016, 05:13:22 AM »
What Pete said, fitting a cast nose cap is a bear compared to installing one you've made yourself for the project at hand.

Here are two tutorials on making them:

http://americanlongrifles.org/forum/index.php?topic=24785.0

http://americanlongrifles.org/forum/index.php?topic=9.0

dave
Dave Parks   /   Quis custodiet ipsos custodes?

Offline SHARPS4953

  • Starting Member
  • *
  • Posts: 38
Re: Poured nose cap
« Reply #4 on: November 19, 2016, 02:58:52 PM »
thanks for the replies. Ive made both types of nose caps but want to stay historically correct. I prefer iron mounted but Jim doesnt offer this parts set in iron. I guess this is an excuse to build another one out of steel ;)