« previous next »
Pages: [1]   Go Down

Author Topic: Carding wheels  (Read 5280 times)

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4337
  • If we need it here, make it here. Charlie Daniels
Carding wheels
« on: April 15, 2009, 01:44:01 AM »
When all else fails, ask ALR.  I am in need of replacing my 6" wire wheel for carding.  I know Brownells sells them and they are a quality wheel.  I was hoping that someone on this board had a line on a good 6" wire wheel with a wire thickness of somewhere in the neighborhood of .0035" to .005.  I know you guys are very resourceful so lets hear it.  Thanks
DMR
Logged

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4110
  • Dane Lund
Re: Carding wheels
« Reply #1 on: April 15, 2009, 01:58:23 AM »
David,

I get mine from Brownell's.  I think it's called a Dixcell???  Expensive, but a really good carding wheel.
Logged
In His grip,

Dane

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Carding wheels
« Reply #2 on: April 15, 2009, 02:06:54 AM »
The thing about the Brownell's wheel is that it's a STAINLESS wire bristle. That's very important.

I didn't see anything close here, but it's a great site anyway:

http://www.mcmaster.com/#catalog/115/2658/=1g3i48
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Carding wheels
« Reply #3 on: April 15, 2009, 02:47:31 AM »
Logged
Nobody is always correct, Not even me.

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4337
  • If we need it here, make it here. Charlie Daniels
Re: Carding wheels
« Reply #4 on: April 15, 2009, 02:53:15 AM »
Quote from: jerrywh on April 15, 2009, 02:47:31 AM
Dave --- just ask-- http://shorinternational.com/BrushWireBig.htm
Jerry,  I knew you would have the answer.  I almost just emailed you direct but thought maybe the rest of the forum would like to know this information.
DMR 
Logged

billd

  • Guest
Re: Carding wheels
« Reply #5 on: April 15, 2009, 03:13:25 AM »
http://www.weilercorp.com/powpg.htm

We deal with this company at work. Don't know if they have what you want but they make almost everything.

Bill
Logged
Pages: [1]   Go Up
« previous next »